Yozgat Bozok Üniversitesi
6602c-MUH/19-288.
This study was carried out to compare the Si and SiC MOSFETs in the market used on motor driver circuits. A motor driver circuit is designed to run the brushless DC motors. Thanks to the semiconductors used in the driver circuit, the motor receives current as desired. While performing this task, the MOSFETs get hot and lose power. This situation changes according to the material structure used inside the MOSFETs. Hence, it is planned to compare Si MOSFETs that have been in the market for a long time and SiC MOSFETs that have been used recently under different loads and different temperatures circumstances. Si and SiC MOSFETs are placed in the motor driver circuit, which has the same structure in the simulation environment. The operation of the motor under no load and on different mechanical loads has been analysed. In these cases, the response of the MOSFETs to temperature changes was also analysed by changing the cooling temperature. As a result of the study, SiC MOSFETs were less heated and less power loss was observed than Si MOSFETs. It has been observed that when the mechanical load is high, the switching speed of Si MOSFETs decreases despite the speed of SiC MOSFETs is not affected. As a result of this study, it has been observed that SiC MOSFETs used in the motor driver circuit work more efficiently than Si MOSFETs for electric vehicles.
Electric Vehicles 3-Phase Motor Drive MOSFET Silicon Carbide (SiC)Mosfet
6602c-MUH/19-288.
Birincil Dil | İngilizce |
---|---|
Konular | Elektrik Mühendisliği |
Bölüm | Articles |
Yazarlar | |
Proje Numarası | 6602c-MUH/19-288. |
Yayımlanma Tarihi | 31 Aralık 2022 |
Gönderilme Tarihi | 18 Haziran 2022 |
Kabul Tarihi | 19 Ekim 2022 |
Yayımlandığı Sayı | Yıl 2022 Cilt: 6 Sayı: 4 |
International Journal of Automotive Science and Technology (IJASTECH) is published by Society of Automotive Engineers Turkey