Numerical Investigation of Interfacial Stress Distribution in Adhesive-Bonded Joints for Different Adhesive Materials

Yıl 2022, , 53 - 65, 20.12.2022

Somnath Somadder , Palash Das Md Ashraful Islam , Md. Abdul Hasib

https://doi.org/10.24107/ijeas.1117544

Öz

The widespread use of adhesive bonded connections has been used in a range of technical fields. In this paper, the interfacial stress distribution of adhesive bonded joint is presented. When determining whether or not a structure is dependable for use in operation, the stresses that act along the bond line of an adhesively bonded lap joint are of the utmost importance. The purpose of this study is to develop finite element solutions that are able to anticipate shear and peel stresses using the theory of elasticity as their foundation. The effect of adhesive properties on stress distribution is investigated by using different adhesive materials. By analysing five different adhesive materials it is concluded that ‘adhesive I’ is more reliable for operation.

Anahtar Kelimeler

Adhesive bonded joints, Interfacial stress, Finite element solution, Adhesive materials.

Kaynakça

• Liao L., Sawa T., Huang C., Numerical analysis on load-bearing capacity and damage of double scarf adhesive joints subjected to combined loadings of tension and bending. International Journal of Adhesion and Adhesives, 53, 65–71, 2014.
• Methfessel, T. S., Becker, W., A generalized model for predicting stress distributions in thick adhesive joints using a higher-order displacement approach, Composite Structure, 291, 2022.
• Somadder, S., Islam S. Md., Effect of Adhesive Layer Thickness and Slant Angle on Piezoelectric Bonded Joints, Journal of Mechanical Engineering, 19, 251-268, 2022. Tsai M.Y., Oplinger D.W., Morton J., Improved theoretical solutions for adhesive lap joints, International Journal of Solids and Structures, 35, 1163–1185, 1998.
• Mokhtari M., Madani K., Belhouari M., Touzain S., Feaugas X., Ratwani M., Effects of composite adherend properties on stresses in double lap bonded joints, Materials and Design, 44, 633–639, 2013.
• [6] Moya-Sanz E.M., Ivañez I., Garcia-Castillo S.K., Effect of the geometry in the strength of single-lap adhesive joints of composite laminates under uniaxial tensile load. International Journal of Adhesion and Adhesives, 72, 23–29, 2017. Ozel A., Yazici B., Akpinar S., Aydin M.D., Temiz S., A study on the strength of adhesively bonded joints with different adherends, Composites Part B: Engineering, 62, 167–174, 2014.
• He X., Gu F., Ball A., Fatigue Behaviour of Fastening Joints of Sheet Materials and Finite Element Analysis, Advances in Mechanical Engineering, 5, 1-9, 2013.
• Zhao L., Wang Y., Qin T., Zhang J., X., A New Material Model for 2D FE Analysis of Adhesively Bonded Composite Joints, MATERIALS SCIENCE, 20, 468-473, 2014.
• Pires I., Quintino L., Miranda M. R., Numerical simulation of mono- and biadhesive aluminium lap joint, Advances in Mechanical Engineering, Journal of Adhesion Science and Technology,20, 19-36, 2006.
• Rodríguez Q. R., Sollero P., Rodrigues B. M., STRESS ANALYSIS AND FAILURE CRITERIA OF ADHESIVE BONDED SINGLE LAP JOINTS, 21st International Congress of Mechanical Engineering, 2011.
• He X., Dynamic Behaviour of Single Lap-Jointed Cantilevered Beams, Key Engineering Materials, 413, 733-740, 2009
• He X., Zhang Y., Numerical Studies on Mechanical Behavior of Adhesive Joints, Advances in Materials Science and Engineering, 2015, 1-13, 2015.
• Ozer H., Oz O., Three dimensional finite element analysis of bi-adhesively bonded double lap joint, International Journal of Adhesion and Adhesives, 37, 50-55, 2012. He X., Wang Y., Analytical Model for Predicting the Stress Distributions within Single-Lap Adhesively Bonded Beams, Advances in Materials Science and Engineering, 2014, 1-5, 2014.
• Andruet H. R., Dillard, A. D., Holzer M. S., Two- and three-dimensional geometrical nonlinear Fnite elements for analysis of adhesive joints, International Journal of Adhesion and Adhesives, 21, 17–34, 2001.
• Koguchi H., Costa D. A. J., “Analysis of the stress singular field at a vertex in 3D bonded structures having a slanted surface,” International Journal of Solids and Structures, 47, 3131-3140, 2010.
• He X., “Effect of Mechanical Properties of Adhesives on Stress Distributions in Structural Bonded Joints” World Congress on Engineering, 2010.