Analysis of The Effects of Different Frequency Values on The Loss of Transformers

Abstract

Accurate simulation and loss estimation in power transformers are crucial for both the design phase and useful life of the transformer. In this study, core losses and magnetic flux densities of a power transformer for different frequency values are calculated. For this, ANSYS @ MAXWELL software based on the Finite Elements Method (SEY) and the 3D simulation model of the transformer were examined. The results obtained from simulations performed at 50 Hz and 60 Hz frequencies were compared with theoretical and experimental results. It has been observed that increasing the frequency causes increased heat and loss in the core of the transformer.

Keywords

• Core loss,power transformer,magnetic flux density,frequency

References

1. [1] E.I. Amoiralis, M.A. Tsili, A.G. Kladas, “Transformer Design and Optimization: A Literature Survey”, IEEE Transactions on Power Delivery, Vol. 24, No.4, pp 1999-2024, 2009
2. [2] P. S. Georgilakis, M. A. Tsili, and A. T. Souflaris, “A heuristic solution to the transformer manufacturing cost optimization problem,” J. Mat. Process. Technol.,vol. 181, pp. 260–266, 2007.
3. [3] Yugendrao K. N.,Structural Modeling of a Three Phase Core type Transformer using ANSYS Maxwell 3D, Internatıonal Journal Of Innovatıve Research In Electrıcal, Electronıcs, Instrumentatıon And Control Engıneerıng Vol. 4, Issue 4, April 2016, pp. 17-20.
4. [4] S. Vasilija, FEM 2D and 3D design of transformer for core losses computation, Scıentıfıc Proceedings XIV Internatıonal Congress "Machınes. Technolоgıes. Materıals." 2017–Summer Sessıon Volume V, 345-348.
5. [5] M.B.B. Sharifian, R. Esmaeilzadeh, M. Farrokhifar, J. Faiz, M. Ghadimiand G. Ahrabian, computation of a single-phase shell-type transformer windings forces caused by ınrush and short-circuit currents, Journal of Computer Science 4 (1):, (2008) 51-58.
6. [6] T. OROSZ, G. KLEIZER, T. IVÁNCSY, Z. Á. TAMUS, Comparison of methodsforcalculation of core-form power transformer’score temperature rise, Periodica Poly technica Electrical Engineering and Computer Science, 60(2), 2016, pp. 88-95.
7. [7] M. L. Myint, Y. A. OO, Analysis of distribution transformer design using FEA, International Journal of Scientific Research Engineering &Technology (IJSRET), Volume 3, Issue 4, July 2014, (773-775)
8. [8] N. A. M. Yusoff, K. A. Karim, S. A. Ghani, T. Sutikno, A. Jidin*Multiphase transformer modeling using finite element method, International Journal of Power Electronics and Drive System (IJPEDS) Vol. 6, No. 1, March 2015, pp. 56~64.

9. [9] Y. Chen, P.Pillay, An Improved Formula for Lamination Core Loss Calculation in Machine Operating with High Frequency and High Flux Density Excitation, IEEE, 2002
10. [10] User’s guide – Maxwell 2D/3D. 2019