COMPARISON OF 2018 AND 2007 TURKISH EARTHQUAKE REGULATIONS

Abstract

The new building earthquake regulation of Turkey has been published on 18 March 2018. There are two different methods in the new code: Linear and nonlinear earthquake analysis methods. In the present study, the different structural applications of a school project located in Gaziantep province of Turkey analyzed by using linear earthquake calculation methods. The structure has modeled with three different ways; only with Reinforced Concrete columns, with Reinforced Concrete columns and Shear Walls, only with Shear Walls. In analysis, 2007 regulation on buildings in earthquake zones are compared with the new Turkish 2018 earthquake code. The software SAP 2000 is used for the calculations and program outcomes are used for comparisons. Base shear forces, maximum displacement and force values and overturning moment findings are calculated in each structural configuration. The advantages and disadvantages of the new earthquake code are discussed in detail using earthquake analysis results.

Keywords

• 2018 Turkish earthquake regulations,Base shear forces,Joint displacements,2007 Turkish regulations on buildings in earthquake zones

References

1. [1] Ellul, F., Dina, D., The Bingol, Turkey Earthquake of the 1st of May 2003, University of Bath Architecture and Civil Engineering Department, England, 2003; pp. 10-38.
2. [2] Alyamaç, K. E. and Erdoğan, A. S., "Geçmişten Günümüze Afet Yönetmelikleri ve Uygulamada Karşılaşılan Tasarım Hataları’, Deprem Sempozyumu, 2005; pp. 707–715.
3. [3] Türkiye Bina Deprem Yönetmeliği, Afet ve Acil Durum Yönetimi Başkanlığı, Resmi Gazete, Sayı: 30364 (Mükerrer), 18 Mart 2018.
4. [4] T.C Bayındırlık ve İskân Bakanlığı, Deprem Bölgelerinde Yapılacak Binalar Hakkında Yönetmelik, Ankara, 2007.