BibTex RIS Kaynak Göster

SIZE EFFECT ON PUNCHING SHEAR BEHAVIOR OF SLAB-COLUMN ASSEMBLY MADE FROM ENGINEERING CEMENTITIOUS COMPOSITE MATERIALS WITH POLYVINYL ALCOHOL FIBERS

Yıl 2017, Cilt: 2 Sayı: 2, 31 - 40, 01.04.2017

Ali Kadhim H. Alhussaınawe Farid H. Arna'ot Ahmmad A. Abbass Mustafa Ozakca

Öz

Engineering Cementitious Composite (ECC) materials with PolyVinyl Alcohol (PVA) fibers are employed to investigate the effect of the ductile matrix on the behavior of flat plate-column connection. Totally four slabs are cast and tested, three of PVA-ECC slabs are compared to control slab of normal concrete. The thickness of the slabs used was variable (50, 60 and 80 mm) in order to investigate the effect of the size, and keeping the other size is constant (500 × 500 mm). All four slabs are reinforced with same conventional reinforcement ratio. The results showed that in the ductility of the slabs made from PVA-ECC are significantly enhanced compared with the normal concrete slab, this ductility improvement decrease with increasing the slab thickness, and more over the shear stress in the specific location is reducing with increasing the slab thickness

Kaynakça

  • ACI318-14. (2014) Building Code Requirements for Structural Concrete (ACI 318M-14) and Commentary. American Concrete Institute, Farmington Hills, MI, ACI 318,-14.
  • Abo Altemen, A.A., Arna'ot, F. H., Abbass, Ahmmad. A.& OZAKCA ,M. (2017). Punching Shear Behavior of Small SFRC Flat Plate. Proceeding ICOCEE Cappadocia 2017:2nd International Conference on Civil and Environmental Engineering. Nevsehir, TURKEY, 891-901.
  • Bazant, Z. P. & Cao, Z. (1987). Size Effect in Punching Shear Failure of Slabs. ACI Structural, Title no. 84-S6, 44-53.
  • Brikle, G. & Dilger,W. H. (2008). Influence of Slab Thickness on Punching Shear Strength. ACI Structural Journal, 105(2), 180-188.
  • Broms, C. E. (2005). Concrete Flat Slabs and Footings Design Method for Punching and Detailing for Ductility. Royal Institute of Technology, Stockholm, Ph.D Thesis.
  • DIN1045-2. (2008). Concrete reinforced and pre-stressed concrete structures- Part 1: Design and construction, August 2008.
  • EN1992-1-1.(2004). Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings. CEN, Brussels.
  • Guandalini, S., Burdet, O.L. & Muttoni, A. (2009). Punching Tests of Slabs with Low Reinforcement Ratios. ACI Structural Journal, 106(1), 87-95.
  • Li, V.C. (2007). Engineered Cementitious Composites (ECC) – Material, Structural, and Durability Performance. In Concrete Construction Engineering Handbook, New York: CRC Press,.
  • Mutton, A. & Schwartz, J. (1991). Behavior of Beams and Punching in Slabs without Shear Reinforcement. IABSE Colloquium, 62, 703-708.
  • Regan, P. E. (1981). Behavior of Reinforced Concrete Flat Slabs. CIRIA Report 89
  • (Construction Industry Research and Information Association), Press London.
  • Shehata, I. (1990). Simplified Model For Estimating The Punching Resistance Of Reinforced Concrete Slabs. Materials and Structures/ Materiaux et Constructions, 23, 364-371.

Yıl 2017, Cilt: 2 Sayı: 2, 31 - 40, 01.04.2017

Ali Kadhim H. Alhussaınawe Farid H. Arna'ot Ahmmad A. Abbass Mustafa Ozakca

Öz

Kaynakça

  • ACI318-14. (2014) Building Code Requirements for Structural Concrete (ACI 318M-14) and Commentary. American Concrete Institute, Farmington Hills, MI, ACI 318,-14.
  • Abo Altemen, A.A., Arna'ot, F. H., Abbass, Ahmmad. A.& OZAKCA ,M. (2017). Punching Shear Behavior of Small SFRC Flat Plate. Proceeding ICOCEE Cappadocia 2017:2nd International Conference on Civil and Environmental Engineering. Nevsehir, TURKEY, 891-901.
  • Bazant, Z. P. & Cao, Z. (1987). Size Effect in Punching Shear Failure of Slabs. ACI Structural, Title no. 84-S6, 44-53.
  • Brikle, G. & Dilger,W. H. (2008). Influence of Slab Thickness on Punching Shear Strength. ACI Structural Journal, 105(2), 180-188.
  • Broms, C. E. (2005). Concrete Flat Slabs and Footings Design Method for Punching and Detailing for Ductility. Royal Institute of Technology, Stockholm, Ph.D Thesis.
  • DIN1045-2. (2008). Concrete reinforced and pre-stressed concrete structures- Part 1: Design and construction, August 2008.
  • EN1992-1-1.(2004). Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings. CEN, Brussels.
  • Guandalini, S., Burdet, O.L. & Muttoni, A. (2009). Punching Tests of Slabs with Low Reinforcement Ratios. ACI Structural Journal, 106(1), 87-95.
  • Li, V.C. (2007). Engineered Cementitious Composites (ECC) – Material, Structural, and Durability Performance. In Concrete Construction Engineering Handbook, New York: CRC Press,.
  • Mutton, A. & Schwartz, J. (1991). Behavior of Beams and Punching in Slabs without Shear Reinforcement. IABSE Colloquium, 62, 703-708.
  • Regan, P. E. (1981). Behavior of Reinforced Concrete Flat Slabs. CIRIA Report 89
  • (Construction Industry Research and Information Association), Press London.
  • Shehata, I. (1990). Simplified Model For Estimating The Punching Resistance Of Reinforced Concrete Slabs. Materials and Structures/ Materiaux et Constructions, 23, 364-371.
Toplam 13 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Bölüm Research Article
Yazarlar

Ali Kadhim H. Alhussaınawe Bu kişi benim

Farid H. Arna'ot Bu kişi benim

Ahmmad A. Abbass Bu kişi benim

Mustafa Ozakca Bu kişi benim

Yayımlanma Tarihi 1 Nisan 2017
Yayımlandığı Sayı Yıl 2017 Cilt: 2 Sayı: 2

Kaynak Göster

APA H. Alhussaınawe, A. K., H. Arna’ot, F., A. Abbass, A., Ozakca, M. (2017). SIZE EFFECT ON PUNCHING SHEAR BEHAVIOR OF SLAB-COLUMN ASSEMBLY MADE FROM ENGINEERING CEMENTITIOUS COMPOSITE MATERIALS WITH POLYVINYL ALCOHOL FIBERS. The International Journal of Energy and Engineering Sciences, 2(2), 31-40.

IMPORTANT NOTES

No part of the material protected by this copyright may be reproduced or utilized in any form or by any means, without the prior written permission of the copyright owners, unless the use is a fair dealing for the purpose of private study, research or review. The authors reserve the right that their material can be used for purely educational and research purposes. All the authors are responsible for the originality and plagiarism, multiple publication, disclosure and conflicts of interest and fundamental errors in the published works.

*Please note that  All the authors are responsible for the originality and plagiarism, multiple publication, disclosure and conflicts of interest and fundamental errors in the published works. Author(s) submitting a manuscript for publication in IJEES also accept that the manuscript may go through screening for plagiarism check using IThenticate software. For experimental works involving animals, approvals from relevant ethics committee should have been obtained beforehand assuring that the experiment was conducted according to relevant national or international guidelines on care and use of laboratory animals.  Authors may be requested to provide evidence to this end.
 
**Authors are highly recommended to obey the IJEES policies regarding copyrights/Licensing and ethics before submitting their manuscripts.


Copyright © 2024. AA. All rights reserved