Research Article

Visual-SLAM based 3-dimensional modelling of indoor environments

Volume: 9 Number: 3 October 31, 2024
EN

Visual-SLAM based 3-dimensional modelling of indoor environments

Abstract

Simultaneous localization and mapping (SLAM) is used in many fields to enable robots to map their surroundings and locate themselves in new circumstances. Visual-SLAM (VSLAM), which uses a camera sensor, and LiDAR-SLAM, which uses a light detection and ranging (LiDAR) sensor, are the most prevalent SLAM methods. Thanks to its benefits, including low-cost compared to LiDAR, low energy consumption, durability, and extensive environmental data, VSLAM is currently attracting much attention. This study aims to produce a three-dimensional (3D) model of an indoor environment using image data captured by the stereo camera located on the Unmanned Ground Vehicle (UGV). Easily measured objects from the field of operation were chosen to assess the generated model’s accuracy. The actual dimensions of the objects were measured, and these values were compared to those derived from the VSLAM-based 3D model. When the data were evaluated, it was found that the size of the object produced from the model could be varied by ±2cm. The surface accuracy of the 3D model produced has also been analysed. For this investigation, areas where the walls and floor surfaces were flat in the field were selected, and the plane accuracy of these areas was analysed. The plain accuracy values of the specified surfaces were determined to be below ±1cm.

Keywords

Supporting Institution

Ondokuz Mayis University Scientific Research Projects

Project Number

PYO.MUH.1906.22.002, PYO.MUH.1908.22.079

Thanks

This study was funded by Ondokuz Mayis University Scientific Research Projects (Projects No: PYO.MUH.1906.22.002, and PYO.MUH.1908.22.079). We also appreciate the LOCUS-TEAM members for their support during this study.

References

  1. 1. Uçarlı, A. C., İlçi, V., Par, K., & Peker, A. U. (2022). Otonom araçlarda çoklu GNSS uydu sistemleri kullanımının konum doğruluğuna etkisinin araştırılması. Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, 11(3), 672–680. https://doi.org/10.28948/ngumuh.1082124
  2. 2. Li, N., Guan, L., Gao, Y., Du, S., Wu, M., Guang, X., & Cong, X. (2020). Indoor and outdoor low-cost seamless integrated navigation system based on the integration of INS/GNSS/LIDAR system. Remote Sensing, 12(19), 1–21. https://doi.org/10.3390/rs12193271
  3. 3. Yurdakul, Ö., & Kalaycı, İ. (2022). The effect of GLONASS on position accuracy in CORS-TR measurements at different baseline distances. International Journal of Engineering and Geosciences, 7(3), 229–246. https://doi.org/10.26833/ijeg.975204
  4. 4. Uçarlı, A. C., Demir, F., Erol, S., & Alkan, R. M. (2020). Farklı GNSS Uydu Sistemlerinin Hassas Nokta Konumlama (PPP) Tekniğinin Performansına Etkisinin İncelenmesi. Geomatik, 6(3), 247–258. https://doi.org/10.29128/geomatik.779420
  5. 5. Ilci, V., & Toth, C. (2020). High definition 3D map creation using GNSS/IMU/LiDAR sensor integration to support autonomous vehicle navigation. Sensors, 20(3), 899. https://doi.org/10.3390/s20030899
  6. 6. Atiz, O. F., Konukseven, C., Ogutcu, S., & Alcay, S. (2022). Comparative analysis of the performance of Multi-GNSS RTK: A case study in Turkey. International Journal of Engineering and Geosciences, 7(1), 67–80. https://doi.org/10.26833/ijeg.878236
  7. 7. İlci, V. (2020). CenterPoint RTX Teknolojisinin Doğruluk ve Tekrarlana bilirliğinin Araştırılması. Geomatik, 5(1), 10–18. https://doi.org/10.29128/geomatik.560026
  8. 8. Gurturk, M., & Ilci, V. (2022). The performance evaluation of PPK and PPP-based Loosely Coupled integration in wooded and urban areas. Earth Sciences Research Journal, 26(3), 211–220. https://doi.org/10.15446/esrj.v26n3.100518

Details

Primary Language

English

Subjects

Photogrametry, Navigation and Position Fixing

Journal Section

Research Article

Early Pub Date

November 17, 2024

Publication Date

October 31, 2024

Submission Date

March 26, 2024

Acceptance Date

May 10, 2024

Published in Issue

Year 2024 Volume: 9 Number: 3

APA
Özbayrak, S., & İlçi, V. (2024). Visual-SLAM based 3-dimensional modelling of indoor environments. International Journal of Engineering and Geosciences, 9(3), 368-376. https://doi.org/10.26833/ijeg.1459216
AMA
1.Özbayrak S, İlçi V. Visual-SLAM based 3-dimensional modelling of indoor environments. IJEG. 2024;9(3):368-376. doi:10.26833/ijeg.1459216
Chicago
Özbayrak, Simla, and Veli İlçi. 2024. “Visual-SLAM Based 3-Dimensional Modelling of Indoor Environments”. International Journal of Engineering and Geosciences 9 (3): 368-76. https://doi.org/10.26833/ijeg.1459216.
EndNote
Özbayrak S, İlçi V (October 1, 2024) Visual-SLAM based 3-dimensional modelling of indoor environments. International Journal of Engineering and Geosciences 9 3 368–376.
IEEE
[1]S. Özbayrak and V. İlçi, “Visual-SLAM based 3-dimensional modelling of indoor environments”, IJEG, vol. 9, no. 3, pp. 368–376, Oct. 2024, doi: 10.26833/ijeg.1459216.
ISNAD
Özbayrak, Simla - İlçi, Veli. “Visual-SLAM Based 3-Dimensional Modelling of Indoor Environments”. International Journal of Engineering and Geosciences 9/3 (October 1, 2024): 368-376. https://doi.org/10.26833/ijeg.1459216.
JAMA
1.Özbayrak S, İlçi V. Visual-SLAM based 3-dimensional modelling of indoor environments. IJEG. 2024;9:368–376.
MLA
Özbayrak, Simla, and Veli İlçi. “Visual-SLAM Based 3-Dimensional Modelling of Indoor Environments”. International Journal of Engineering and Geosciences, vol. 9, no. 3, Oct. 2024, pp. 368-76, doi:10.26833/ijeg.1459216.
Vancouver
1.Simla Özbayrak, Veli İlçi. Visual-SLAM based 3-dimensional modelling of indoor environments. IJEG. 2024 Oct. 1;9(3):368-76. doi:10.26833/ijeg.1459216

Cited By