EN
Determining highway slope ratio using a method based on slope angle calculation
Abstract
Geographic Information System (GIS) is a vital tool used in numerous areas related to natural science and engineering studies. Managing complex data and obtaining accurate results from the analysis are essential functions of GIS. It is also efficiently used in highway designing both in project and application phases. This study proposes a new calculation method of slope angles to determine the suitable slope modal of a road by using topographic and geological datasets in a GIS environment. Using this method in the preparation phase of the project enables a more accurate calculation of earthwork volume. The proposed method was applied to a highway to prove this idea. The selected road is a significant tertiary of which project was completed by the Turkish General Directorate of Highways. In this study, the calculated values of the project were considered as references. Comparing both results obtained from the proposed method and application project, the accuracy of the slope modal of the proposed method is 71%, and the accuracy of its earthwork volume is 99%. The proposed approach will enable project managers and designers to determine more reliable earthwork volume during project feasibility studies without any application in the field.
Keywords
References
- Abramson L W, Lee T S, Sharma S & Boyce G M (2001). Slope stability and stabilization methods. John Wiley & Sons. ISBN: 978-0471384939
- Aissi H, Chakhar S & Mousseau V (2012). GIS-based multicriteria evaluation approach for corridor siting. Environment and Planning B: Planning and Design, 39(2), 287–307. DOI: 10.1068/b37085
- Berry J K (2000). Analyzing accumulation surfaces. Map Analysis: Procedures and Applications in GIS Modelling Technical Report. Berry and Associates//Spatial Informations Systems Inc.
- Chang K T (2016). Introduction to geographical information systems. 8th edition. McGraw Hill. New York, USA.
- Chew E P, Goh C J & Fwa T F (1989). Simultaneous optimization of horizontal and vertical alignments for highways. Transportation Research Part B: Methodological, 23(5), 315–329. DOI: 10.1016/0191-2615(89)90008-8
- Clarke K C (1986). Advances in Geographic information systems. Computers, Environment and Urban Systems, 10, 175-184. DOI: 10.1016/0198-9715(86)90006-2
- Collischonn W & Pilar J V (2000). A direction dependent least-cost-path algorithm for roads and canals. International Journal of Geographical Information Science, 14(4), 397–406. DOI: 10.1080/13658810050024304
- Dijkstra E W (1959). A note on two problems in connexion with graphs. Numerische Mathematik, 1(1), 269–271.
Details
Primary Language
English
Subjects
-
Journal Section
Research Article
Publication Date
July 1, 2021
Submission Date
March 16, 2020
Acceptance Date
April 30, 2020
Published in Issue
Year 2021 Volume: 6 Number: 2
APA
Yılmaz, O. S., Özkan, G., & Gülgen, F. (2021). Determining highway slope ratio using a method based on slope angle calculation. International Journal of Engineering and Geosciences, 6(2), 98-103. https://doi.org/10.26833/ijeg.704317
AMA
1.Yılmaz OS, Özkan G, Gülgen F. Determining highway slope ratio using a method based on slope angle calculation. IJEG. 2021;6(2):98-103. doi:10.26833/ijeg.704317
Chicago
Yılmaz, Osman Salih, Gülgün Özkan, and Fatih Gülgen. 2021. “Determining Highway Slope Ratio Using a Method Based on Slope Angle Calculation”. International Journal of Engineering and Geosciences 6 (2): 98-103. https://doi.org/10.26833/ijeg.704317.
EndNote
Yılmaz OS, Özkan G, Gülgen F (July 1, 2021) Determining highway slope ratio using a method based on slope angle calculation. International Journal of Engineering and Geosciences 6 2 98–103.
IEEE
[1]O. S. Yılmaz, G. Özkan, and F. Gülgen, “Determining highway slope ratio using a method based on slope angle calculation”, IJEG, vol. 6, no. 2, pp. 98–103, July 2021, doi: 10.26833/ijeg.704317.
ISNAD
Yılmaz, Osman Salih - Özkan, Gülgün - Gülgen, Fatih. “Determining Highway Slope Ratio Using a Method Based on Slope Angle Calculation”. International Journal of Engineering and Geosciences 6/2 (July 1, 2021): 98-103. https://doi.org/10.26833/ijeg.704317.
JAMA
1.Yılmaz OS, Özkan G, Gülgen F. Determining highway slope ratio using a method based on slope angle calculation. IJEG. 2021;6:98–103.
MLA
Yılmaz, Osman Salih, et al. “Determining Highway Slope Ratio Using a Method Based on Slope Angle Calculation”. International Journal of Engineering and Geosciences, vol. 6, no. 2, July 2021, pp. 98-103, doi:10.26833/ijeg.704317.
Vancouver
1.Osman Salih Yılmaz, Gülgün Özkan, Fatih Gülgen. Determining highway slope ratio using a method based on slope angle calculation. IJEG. 2021 Jul. 1;6(2):98-103. doi:10.26833/ijeg.704317
Cited By
Geniş çalışma alanlarında jeofizik ve jeoteknik ölçümlerin yerine geçebilecek vekil özelliklerin CBS ile belirlenmesi
Geomatik
https://doi.org/10.29128/geomatik.1161434Monitoring and stability analysis of roadbed & high slope prior to highway construction
PLOS ONE
https://doi.org/10.1371/journal.pone.0303860Enhancing landslide inventory mapping through Multi-SAR image analysis: a comprehensive examination of current landslide zones
Acta Geodaetica et Geophysica
https://doi.org/10.1007/s40328-024-00450-1Bozdağlar Kütlesi’nin Asimetrik Yapısı ve Tektonizma İlişkisinin CBS İle İncelenmesi
Geomatik
https://doi.org/10.29128/geomatik.1541384Investigation of Longoz Forests with Remote Sensing Techniques on Google Earth Engine Platform: The Case of İğneada Longoz Forests (2000–2021)
International Journal of Engineering and Geosciences
https://doi.org/10.26833/ijeg.1650786