3D Modelling of Geometric Triangle Construction Elements in Indoor Spaces: A Case Study for Tahir and Zühre Masjid

Abstract

Tahir and Zühre Masjid, which is one of the works of Konya and Anatolian Seljuk Period, serve daily from the 13th century and draw attention with its interior architecture. The Masjid is seated on a square plan and covered with a dome using triangular transitional elements.  These  artifacts  are  the  most  important  proofs  of the  architectural  perspectives  and  orientations of the past  period. Demonstrating and documenting past architectural and engineering skills has become much easier with modern measurement and evaluation techniques at the present time.  In this study, interior 3D modeling study of Tahir and Zühre Masjid was made by using close range photogrammetry. Also the triangular transitional elements between the square plan and the dome of the structure were picked out. As a result, it has b een observed that the method of close range photogrammetry for documentation and restoration works is not only successful in outdoor facade but also indoor modelling. 

Keywords

• Close-range Photogrammetry,3D Modelling,Indoor Space Modelling,Tahir and Zühre Masjid

References

1. Deniz, A., Şeker, DZ., Alkan, M., Karakış, S., Bayık, S. & Acar, H. (2018). Development of Web-Based GIS for the Cultural Heritage of Safranbolu, Turkey, International Journal of Environment and Geoinformatics (IJEGEO) Vol. 5(3), 368-377.
2. Konyalı, İ. H. (1997). Konya Tarihi. Burak Matbaası, Ankara.
3. Kraus, K. (1994). Photogrammetry 1, Dümmler.
4. Turan, Ş.N. & Yaldız, E. (2018). XIII. Yüzyıl Konya Mahalle Mescitlerinde Kullanılan Kubbeye Geçiş Elamanları, Türk-İslam Medeniyeti Akademik Araştırmalar Dergisi, Cilt:13, Sayı: 26,2018-Yaz
5. Turan, Ş.N. (2018), Türk Mimarisinde Kullanılan Kubbeye Geçiş Elemanları; XIII. Yüzyıl Anadolu Selçuklu Dönemi Konya Mahalle Mescitleri Örneği”, NEÜ, FBE, Yayımlanmamış Yüksek Lisans Tezi.
6. URL 1. http://www.photomodeler.com/index.html.
7. Yakar, M. & Doğan, Y. (2018). GIS and threedimensional Modeling for Cultural Heritages, International Journal of Engineering and Geosciences (IJEG), Vol; 3(2): 50-55.