An Assessment of Drilling and Blasting Techniques at Granite Quarry of AFDIN Construction Company Limited, Katsina State, Nigeria

Abstract

This research work assessed the Drilling and Blasting Techniques at the Granite Quarry of AFDIN Construction Company Limited, Katsina State, Nigeria. The objectives were to identify drilling and blasting equipment, find out the drilling pattern and parameters, assess blasting method and its compliance with safety practices in and around the blast site and review the impact of the blasting operations on the surrounding environment. As an introduction, the concept of drilling and blasting activities and how they affect immediate environment were explained. The study assessed quarry activities using field visit and interviews. Equipment identified at the quarry were Wagon drill, Jack hammer, Compressors, Rock breaker, Excavators and tippers, etc. Also, Atlas Copco YT27 Jack Hammer was the main tool for hole drilling with either Square or Rectangular drilling pattern being adopted and Drilling dimensions of 4x5ft or 4x4ft (spacing and burden) were frequently used at the Quarry. Hole depths used were 6ft, 8ft, 10ft, and 12ft and drilling bit of 1-inch or 2-inch. Furthermore, the study identified that, 2,088.95 kg of explosives (10% High Explosive and 90% Low Explosive) was used to charge 2000 drilled holes with an average hole depth of 3.65metres and diameter of 32mm. A total of 7,394 tonnes of granite rock was blasted. Result from immediate blasting at the quarry indicated presence of dust and fumes within the quarry environment and nearby villages, inhalation of which could lead to serious occupational hazards. Conclusively, the explosion sound from blasting and fly-rock fragments have some serious environmental and health effects to both workers and neighbouring communities in terms of noise pollution and vibration to structures. Wetting the environment and crushing process was recommended to minimise dust generation to barest minimum to protect workers from occupational diseases such as silicosis and Pneumoconiosis, also wearing of personal protective equipment, electric blasting method, corporate social responsibilities to the communities were recommended.

Keywords

• Assessment
• Drilling and Blasting
• Granite Quarry
• Katsina State

References

1. Ahmad, A. (2015). Silicosis, Mining and Occupational Health in India’s Sandstone Industry. EHS Journal.
2. Awwal, D.M. (2017). Review of Modern Blasting Techniques at Dangote Cement Company Obajana, Kogi State, Nigeria, (unpublished PGD Project). Nigerian Institute of Mining and Geosciences, Jos.
3. Armaghani, D. J., Koopialipoor, M., Bahri, M., Hasanipanah, M., Tahir, M. M. (2020). A SVRGWO technique to minimize flyrock distance resulting from blasting. Bulletin of Engineering Geology and the Environment. doi:10.1007/s10064-020-01834-7.
4. Aryafar, A., Rahimdel, M. J., & Tavakkoli, E. (2020). Selection of the Most Proper Drilling and Blasting Pattern by Using MADM Methods (A Case Study: Sangan Iron Ore Mine, Iran). Rudarsko-Geološko-Naftni Zbornik, 35(3), 97–108. doi:10.17794/rgn.2020.3.10
5. Bala A. (2018) “Geospatial Analyses of Land Degradation Sites in Jos South LGA of Plateau State”. M.Sc. Dissertation submitted to the Department of Geomatics, Ahmadu Bello University, Zaria. Available on http://kubanni.abu.edu.ng/jspui/handle/123456789/11107
6. Burgess, W. A., Reist, P. C. (1969). An Industrial Hygiene Study of Flame Cutting in a Granite Quarry. American Industrial Hygiene Association Journal, 30(2), 107–112. doi:10.1080/00028896909343094
7. Jack, P.Y. (2018) “Geological field observation During Student Industrial Training Supervision at AFDIN quarry site”, Katsina: Unpublished.
8. Jahed A, D., Hajihassani, M., Monjezi, M., Mohamad, E. T., Marto, A., & Moghaddam, M. R. (2015). Application of two intelligent systems in predicting environmental impacts of quarry blasting. Arabian J Journal of Geosciences, 8(11), 9647–9665. doi:10.1007/s12517-015-1908-2

9. Kennedy, B.A. (2009). Surface Mining. 2nd Edition. Society for Mining, Metallurgy, and Exploration, Inc., Colorado, USA
10. Kononenko, M., Khomenko, O., Savchenko, M., Kovalenko, I. (2019). Method for calculation of drilling-and-blasting operations parameters for emulsion explosives. Mining of Mineral Deposits, 13(3), 22-30. doi.org/10.33271/mining13.03.022
11. Nandi, S., Burnase, N., Barapatre, A., Gulhane, P., Dhatrak, S. (2018). Assessment of Silicosis Awareness among Stone Mine Workers of Rajasthan State. Indian journal of occupational and environmental medicine, 22(2), 97–100.
12. Regotunov, A., Sukhov, R., Bersenyov, G. (2020). About transition processes in blast hole drilling at quarries. E3S Web of Conferences, 177, 01008. doi:10.1051/e3sconf/202017701008
13. Sadeghi, F., Monjezi, M., Armaghani, D.J. (2019). Evaluation and Optimization of Prediction of Toe that Arises from Mine Blasting Operation Using Various Soft Computing Techniques. Natural Resources Research. doi:10.1007/s11053-019-09605-2.
14. Sergey, A.V., Georgij, S.K., Sergeevich, K., Aleksandr, K.K., Andrey, O.S., Anna, A.S. (2017). Destruction of Rock Upon Blasting of Explosive Agent. ARPN Journal of Engineering and Applied Sciences. ISSN 1819-6608
15. Singh, P. (2020). Study of Stone Quarrying and Silicosis in Jodhpur District. Journal of Global Resources, 6(01), 118–121.
16. Tejado, J. J., Guillén, J., & Baeza, A. (2016). Assessment of occupational exposure in a granite quarry and processing factory. Journal of Radiological Protection, 36(3), 641–652. doi:10.1088/0952-4746/36/3/641.
17. Yadav, S. P., Anand, P. K., Singh, H. (2011). Awareness and Practices about Silicosis among the Sandstone Quarry Workers in Desert Ecology of Jodhpur, Rajasthan, India. Journal of Human Ecology, 33(3), 191–196. doi:10.1080/09709274. 2011.11906359