MİDYE DEPOLAMA İÇİN TASARLANMIŞ BİR APARATTA YORGUNLUK ANALİZİ

Abstract

Midye hasadı ve depolanması, operasyonel verimliliği ve çalışan güvenliğini sağlamak için verimli ve dayanıklı aparatlar gerektirir. Bu çalışma, iki farklı delik çapına (8 mm ve 10 mm) sahip bir midye depolama aparatının yorulma performansını sonlu elemanlar analizi (FEA) kullanarak değerlendirmektedir. Aparat SolidWorks'te tasarlanmış ve yorulma değerlendirmeleri ANSYS Workbench'te değişen basınç koşulları altında gerçekleştirilmiştir. Sayısal sonuçlar, delik çapının yorulma ömrünü önemli ölçüde etkilediğini ve daha küçük geometrik farklılıkların yapısal performansta önemli farklılıklara yol açtığını göstermektedir. Elde edilen bulgular, sağlam ve ergonomik olarak optimize edilmiş depolama çözümleri tasarlamayı ve böylece midye yetiştiriciliği operasyonlarında verimliliği ve güvenliği artırmayı amaçlayan gelecekteki çalışmalara katkıda bulunabilecek değerli bilgiler sunmaktadır.

Keywords

• Çift kabuklu
• Yorulma testi
• Sonlu elemanlar analiz yöntemi
• Delik çapı.

FATIGUE ANALYSIS OF AN APPARATUS DESIGNED FOR MUSSEL STORAGE

Abstract

Mussel harvesting and storage require efficient and durable apparatuses to ensure operational productivity and worker safety. This study evaluates the fatigue performance of a mussel storage apparatus with two different hole diameters (8 mm and 10 mm) using finite element analysis (FEA). The apparatus was designed in SolidWorks, and fatigue assessments were performed in ANSYS Workbench under varying pressure conditions. Numerical results indicate that hole diameter significantly affects fatigue life, with smaller geometric variations leading to substantial differences in structural performance. The obtained findings provide valuable insights that may contribute to future studies aimed at designing robust and ergonomically optimized storage solutions, thereby enhancing efficiency and safety in mussel aquaculture operations.

Keywords

• Bivalve
• Fatigue test
• Finite element analysis method
• Hole diameter

References

1. Turkey. Menba Journal of Fisheries Facult, 5(2), 25-36.
2. [2] Ukav, İ., Olgunoğlu, İ.A., (2024). Dünya su ürünleri üretimi: Mevcut durum ve gelişmeler. Çokkızgın, A. (ed.), Ziraat, Orman ve Su Ürünleri Alanında Uluslararası Araştırmalar VIII. EĞİTİM YAYINEVİ.7-30
3. [3] Olsen, Y., Otterstad, O., Duarte, C. M. (2008). Status and future perspectives of marine aquaculture. Aquaculture in the Ecosystem, 293-319.
4. [4] Oppedal, F., Dempster, T., & Stien, L. H. (2011). Environmental drivers of Atlantic salmon behaviour in sea-cages: a review. Aquaculture, 311(1-4), 1-18.
5. [5] Shainee, M., Ellingsen, H., Leira, B. J., & Fredheim, A. (2013). Design theory in offshore fish cage designing. Aquaculture, 392, 134-141.
6. [6] Bai, X. D., Xu, T. J., Zhao, Y. P., Dong, G. H., & Bi, C. W. (2016). Fatigue assessment for the floating collar of a fish cage using the deterministic method in waves. Aquacultural Engineering, 74, 131-142.
7. [7] Verdegem, M., Buschmann, A. H., Latt, U. W., Dalsgaard, A. J., & Lovatelli, A. (2023). The contribution of aquaculture systems to global aquaculture production. Journal of the World Aquaculture Society, 54(2), 206-250.
8. [8] López, J., Hurtado, C. F., Gómez, A., Zamora, V., Queirolo, D., & Gutiérrez, A. (2017). Stress analysis of a submersible longline culture system through dynamic simulation. Latin american journal of aquatic research, 45(1), 25-32.

9. [9] Şereflişan, H. (2014). Investigation of Shell Structure of Lake Gölbaşı Freshwater Mussels in The Crystallized Level Aquaculture Studies, 2014 (3), 13-21. DOI: 10.17693/yunusae.v2014i21953.235710
10. [10] Okolie, P. C., Obika, E. N., Oluwadare, B. S., Azaka, O. A., & Okolie, U. O. (2021). Steel work design, production and analysis of a fish feed mixing machine. Heliyon, 7(8), e07658.
11. [11] Suwandi, A., Zariatin, D. L., Sulaksono, B., Prayogi, E., & Widana, I. M. (2019). Simulation-based Prediction of Structural Design Failure in Fishing Deck Machinery a Hydraulic Type with Finite Element Method. In E3S Web of Conferences (Vol. 130, p. 01001). EDP Sciences
12. [12] Liu, H., Wang, S., Yuan, T., Hu, Y., & Huang, X. (2020, March). Study on the material mechanical properties of aquaculture net cage. In IOP Conference Series: Materials Science and Engineering (Vol. 774, No. 1, p. 012028). IOP Publishing.
13. [13] Liu, H. Y., Pang, G. L., Xiong, Y. L., Yang, S., Yuan, T. P., Chen, X. T., ... & Yuan, S. (2024). Material mechanics properties and critical analyses of fish farm netting and trusses. Ocean Engineering, 292, 116512.
14. [14] Pribadi, A. B. K., Donatini, L., & Lataire, E. (2019). Numerical modelling of a mussel line system by means of lumped-mass approach. Journal of Marine Science and Engineering, 7(9), 309.
15. [15] Liu, W. K., Li, S., & Park, H. S. (2022). Eighty years of the finite element method: Birth, evolution, and future. Archives of Computational Methods in Engineering, 29(6), 4431-4453.
16. [16] Fouda, T. (2024). Using Finite Element Method And Fatigue Assessment Of Single-Screw Fish Oil Extruder. Scientific Papers Series Management, Economic Engineering in Agriculture & Rural Development, 24(1).
17. [17] Erkman, G. E. (2023). Fatigue analysis in leaf springs. Master's thesis, Kirsehir Ahi Evran University, Turkey.
18. [18] Hou, H. M., Dong, G. H., Xu, T. J., Zhao, Y. P., Bi, C. W., & Gui, F. K. (2018). Fatigue reliability analysis of mooring system for fish cage. Applied Ocean Research, 71, 77-89.
19. [19] Liu, F., Jiang, Z., Cheng, T., Xu, Y., Zhu, H., Wang, G., ... & Zhang, Y. (2024). Study on the Dynamic Response of Mooring System of Multiple Fish Cages under the Combined Effects of Waves and Currents. Journal of Marine Science and Engineering, 12(9), 1648.
20. [20] Wang, C. M., Ma, M., Chu, Y., Jeng, D. S., & Zhang, H. (2024). Developments in modeling techniques for reliability design of aquaculture cages: A review. Journal of Marine Science and Engineering, 12(1), 103.