Angular solar relations analysis of a flat plate solar collector in Benin City metropolis

Yıl 2020, Cilt: 2 Sayı: 2, 67 - 77, 26.06.2020

Eghosa Omo-oghogho Aniekan Ikpe

Öz

Abstract: The sun is one of the major sources of energy, the distance, position and rotation of the sun and the earth are obtained for proper collector design.
The declination angles, zenith angles, solar azimuth angles and the incident angles of Benin City, Edo State where obtained considering the ambient conditions, longitude and latitudes of site under consideration. As a result of this the radiation on a tilted surface were obtained for more enhance flat plate solar collector design.

Anahtar Kelimeler

Angular solar relations, solar collector, declination angle

Kaynakça

• 5.0 REFERENCES Bena, B. and R. J. Fuller. 2002. Natural convection solar dryer with biomass back up heater. Journal of Solar Energy, 72 (1): 75-83. Duffie, J.A. and Beckman, W.A. (2013): Solar Engineering of Thermal Processes. John Wiley and Sons, inc., New York.
• Foster, Robert, Majed Ghassemi and Alma Cota. (2010): Solar energy: renewable energy and the enviroment. Boca Raton: CRC press.
• Goswami, D. Yogi, Frank Kreith and Jan F. Kreider. (1999): Principles of solar engineering. 2nd. Philadelphia: Taylor & Francis.
• Iloeje, O. C. 1993. Design, operation and performance of a solar rice dryer. In proc. 2nd Workshop on ‘‘SDTAI’’, Nsukka, Nigeria, 24-27 November.
• Klein, S.A (1977): Calculation of monthly average insolation on tilted surfaces, solar energy laboratory, University of Wisconsin-Madison, Madison, WI 53706, USA.
• National Centre for Energy and Environment (NCEE), University of Benin, Edo State Nigeria (2017).
• Nielsen, R. 2005. Solar Radiation. http://home.iprimus.com.au/nielsens/.
• Sharma, A., C. R. Chen, and V. Nguyen. 2009. Solar energy drying systems: a review. Renewable and Sustainable Energy Review, 13(6-7):1185-1210.