502 Bad Gateway


nginx
502 Bad Gateway

502 Bad Gateway


nginx
Yıl 2019, Cilt 5 , Sayı 2, Sayfalar 50 - 58 2019-06-30

Finite Element Analysis of Tungsten Inert Gas Welding Temperatures on the Stress Profiles of AIS1 1020 Low Carbon Steel Plate

Owunna Ikechukwu [1] , Ikpe Aniekan E. [2]


For better understanding of the residual stress fields associated with Tungsten Inert Gas (TIG) welding, thermal analysis was carried out using Solid Works 2017 version and ESI Visual-Environment to compute the transient temperature profile due to welding thermal loading and resulting stress field in three categories namely; von-mises stress, axial stress and thermal stress. A range of welding temperatures including 1746oC, 1912oC, 2100oC, 2410oC and 2800oC were experimentally applied in the joining process of AISI 1020 low carbon steel plate of 10 mm thickness and a strain gauge was used to measure the thermal stresses induced in the steel plate which the average was recorded as 38,200MPa. The experimental parameters and conditions were applied in finite element simulation of the same plate dimension, and average von-mises stress of 37,508 MPa, average axial stress of 30,732 MPa and average thermal stress of 20,101 MPa was obtained. However, it was observed that the higher the welding temperature, the higher the stresses induced in the welding material. Hence, temperature for TIG welding process should be regulated at its optimum to avoid fatigue acceleration, stress propagation, early crack nucleation and possible fracture on the welded component which may limit the longevity and performance of such component in its service condition.
TIG Welding, Induced stresses, Welding Temperature, Mild Steel, Finite Element Analysis
  • K. Y. Benyounis and A. G. Olabi, “Optimization of Different Welding Process Using Statistical and Numerical Approaches: A Reference Guide”, Advanced Engineering Software, Vol. 39, pp. 483-496, 2008.
  • K. Weman, Welding processes handbook. New York: CRC Press LLC. ISBN 0849317738, 2003.
  • A. E. Ikpe, I. Owunna and I. Ememobong, “Effects of Arc Voltage and Welding Current on the Arc Length of Tungsten Inert Gas Welding (TIG)” International Journal of Engineering Technologies-IJET, Vol. 3, Issue 4, pp. 213-221, 2017.
  • R. K. Jain, Production Technology, Khanna Publishers, New Delhi pp. 344-346, 2001.
  • N. Sura, and V. Mittal, “Experimental Study on Effects of Process Parameters on HAZ of Plain Carbon Steel Using GMAW”, International Journal of Latest Research in Science and Technology, Vol. 4, Issue 2, pp. 167-170, 2015.
  • A. G. Kamble and R. V. Rao, “Experimental Investigation on the Effects of Process Parameters of GMAW and Transient Thermal Analysis of AlSl 321 Steel”, Advances in Manufacturing, Vol. 1 Issue 4, pp. 362-377, 2013.
  • E. Lima, J. Wagener, A. Pyzalla and T. Buslaps, "Investigations on Residual Stresses in Friction Stir Welds", in 3nd International Symposium on Friction Stir Welding, Kobe, Japan, 2001.
  • M. V. Dalvi, A. S. More, S. P. Joshi and V. M. Junnarkar, “Determination of Failure Strength of Flat Plate Weld Joint Using Finite Element Analysis”, International Journal of Scientific & Engineering Research, Vol. 3, Issue 12, pp. 302-306, 2012.
  • C. S. Baviskar, R. M. Tayade and V. G. Patil, “Determination of Failure Strength of Curved Plate Weld Joint Using Finite Element Analysis”, International Journal of Mechanical Engineering and Robotic Research Vol. 1 Issue 3, 22-30, 2012.
  • F. Tarak, Residual Stresses Due to Circumferential Girth Welding of Austenitic Stainless Steel Pipes, Theses and Dissertations, Paper 1649, Lehigh University, 2013.
  • M. Law, H. Prask, V. Luzin and T. Gnaeupel-Harold, Residual stress measurements in coil, linepipe and girth welded pipe, Elsevier Science Ltd., Menai, 2006.
  • G. Mi, C. Li, Z. Gao, D. Zhao and J. Niu, “Finite Element Analysis of Welding Residual Stress of Aluminium Plates Under Different Butt Joint Parameters” Engineering Review, Vol. 34, Issue 3, 161-166, 2014.
  • L. Karlsson, Residual Stresses Due to Welding of a Nozzle to a Pressure Vessel, Lund University, Lund, 2005.
  • T. D. Eastop and A. McConkey, Applied Thermodynamics for Engineering Technologist, Fourth Edition, Pearson Education Ltd. ISBN: 8178085577, 2004.
  • R. G. Budynas and J. K. Nisbett, Shigley’s Mechanical Engineering Design, 9th Edition, McGraw-Hill Higher Education: New York, 2011.
  • B. I. Bang, Y. P. Son, K. H. Oh, Y. P. Kim and W. S. Kim, “Numerical simulation of sleeve repair welding of in-service gas pipelines”, Welding Journal, Vol. 81, pp. 273-282, 2002.
  • I. B. Owunna, and A. E. Ikpe “Effects of Parametric Variations on Bead Width of Gas Tungsten Arc Welding of AISI 1020 Low Carbon Steel Plate”, International Journal of Engineering Technology and Sciences”, Vol. 5, Issue 3, pp. 1-13, 2018.
  • I. Owunna, A. E. Ikpe and J. I. Achebo, “Temperature and Time Dependent Analysis of Tungsten Inert Gas Welding of Low Carbon Steel Plate using Goldak Model Heat Source”, Journal of Applied Science and Environmental Management, Vol. 22, Issue 11, pp. 1719-1725, 2018.
  • Ikpe A. E. and I. Owunna, “Optimization of TIG Welding Input Variables for AISI 1020 Low Carbon Steel Plate Using Response Surface Methodology”, International Journal of Engineering Science and Application, Vol. 2, Issue 3, pp. 113-122, 2018.
  • I. B. Owunna and A. E. Ikpe, “Modelling and Prediction of the Mechanical Properties of TIG Welded Joint for AISI 4130 Low Carbon Steel Plates Using Artificial Neural Network (ANN) Approach”, Nigerian Journal of Technology, Vol. 38, Issue 1, pp. 117-126, 2019.
  • I. Owunna, A. E. Ikpe and J. I. Achebo, “3D Finite Element Modelling of Weld Bead Penetration in Tungsten Inert Gas (TIG) Welding of AISI 1020 Low Carbon Steel Plate”, European Mechanical Science, Vol. 2, Issue 3, pp. 96-105, 2018.
Birincil Dil en
Konular Mühendislik
Bölüm Makaleler
Yazarlar

Yazar: Owunna Ikechukwu (Sorumlu Yazar)
Kurum: University of Benin
Ülke: Nigeria


Yazar: Ikpe Aniekan E.
Ülke: Nigeria


Tarihler

Yayımlanma Tarihi : 30 Haziran 2019

Bibtex @araştırma makalesi { ijet402386, journal = {International Journal of Engineering Technologies IJET}, issn = {2149-0104}, eissn = {2149-5262}, address = {}, publisher = {İstanbul Gelişim Üniversitesi}, year = {2019}, volume = {5}, pages = {50 - 58}, doi = {}, title = {Finite Element Analysis of Tungsten Inert Gas Welding Temperatures on the Stress Profiles of AIS1 1020 Low Carbon Steel Plate}, key = {cite}, author = {Ikechukwu, Owunna and Aniekan E., Ikpe} }
APA Ikechukwu, O , Aniekan E., I . (2019). Finite Element Analysis of Tungsten Inert Gas Welding Temperatures on the Stress Profiles of AIS1 1020 Low Carbon Steel Plate. International Journal of Engineering Technologies IJET , 5 (2) , 50-58 . Retrieved from https://dergipark.org.tr/tr/pub/ijet/issue/45163/402386
MLA Ikechukwu, O , Aniekan E., I . "Finite Element Analysis of Tungsten Inert Gas Welding Temperatures on the Stress Profiles of AIS1 1020 Low Carbon Steel Plate". International Journal of Engineering Technologies IJET 5 (2019 ): 50-58 <https://dergipark.org.tr/tr/pub/ijet/issue/45163/402386>
Chicago Ikechukwu, O , Aniekan E., I . "Finite Element Analysis of Tungsten Inert Gas Welding Temperatures on the Stress Profiles of AIS1 1020 Low Carbon Steel Plate". International Journal of Engineering Technologies IJET 5 (2019 ): 50-58
RIS TY - JOUR T1 - Finite Element Analysis of Tungsten Inert Gas Welding Temperatures on the Stress Profiles of AIS1 1020 Low Carbon Steel Plate AU - Owunna Ikechukwu , Ikpe Aniekan E. Y1 - 2019 PY - 2019 N1 - DO - T2 - International Journal of Engineering Technologies IJET JF - Journal JO - JOR SP - 50 EP - 58 VL - 5 IS - 2 SN - 2149-0104-2149-5262 M3 - UR - Y2 - 2019 ER -
EndNote %0 International Journal of Engineering Technologies Finite Element Analysis of Tungsten Inert Gas Welding Temperatures on the Stress Profiles of AIS1 1020 Low Carbon Steel Plate %A Owunna Ikechukwu , Ikpe Aniekan E. %T Finite Element Analysis of Tungsten Inert Gas Welding Temperatures on the Stress Profiles of AIS1 1020 Low Carbon Steel Plate %D 2019 %J International Journal of Engineering Technologies IJET %P 2149-0104-2149-5262 %V 5 %N 2 %R %U
ISNAD Ikechukwu, Owunna , Aniekan E., Ikpe . "Finite Element Analysis of Tungsten Inert Gas Welding Temperatures on the Stress Profiles of AIS1 1020 Low Carbon Steel Plate". International Journal of Engineering Technologies IJET 5 / 2 (Haziran 2019): 50-58 .
AMA Ikechukwu O , Aniekan E. I . Finite Element Analysis of Tungsten Inert Gas Welding Temperatures on the Stress Profiles of AIS1 1020 Low Carbon Steel Plate. IJET. 2019; 5(2): 50-58.
Vancouver Ikechukwu O , Aniekan E. I . Finite Element Analysis of Tungsten Inert Gas Welding Temperatures on the Stress Profiles of AIS1 1020 Low Carbon Steel Plate. International Journal of Engineering Technologies IJET. 2019; 5(2): 58-50.