ITU Journal of Metallurgy and Materials Engineering

3062-0406

İstanbul Teknik Üniversitesi

Polymer Technologies Materials Engineering (Other)

Polimer Teknolojisi Malzeme Mühendisliği (Diğer)

Characterization of PA 12 Matrix Composites Produced by Selective Laser Sintering Method

Cingöz

Umut Can

İSTANBUL ÜNİVERSİTESİ-CERRAHPAŞA, MÜHENDİSLİK FAKÜLTESİ

https://orcid.org/0000-0001-5479-8474

Özbay

Burçin

FATIH SULTAN MEHMET VAKIF UNIVERSITY, FACULTY OF ENGINEERING

https://orcid.org/0000-0001-8531-8162

Kısasöz

Alptekin

YILDIZ TECHNICAL UNIVERSITY, FACULTY OF ENGINEERING

07 26 2024

1 1 7 11 03 19 2024 04 24 2024

2024

İTÜ Metalurji ve Malzeme Mühendisliği Dergisi

The Selective Laser Sintering (SLS) method is a promising additive manufacturing (AM) technique for the production of thermoplastic polymers and polymer composite materials. Polyamides, Polyamide 12 (PA 12) and Polyamide 11 (PA 11), followed by Polyamide 6 (PA 6), are the most widely used matrix materials for the SLS AM method. Various additives are made from polymer materials to provide the desired physical, mechanical, and tribological properties. In this study, composites with PA 12 matrix were produced by SLS method with 20% hollow ceramic microsphere (W) reinforcement. Before production, PA 12 and ceramic additives were mixed by dry mixing method with a rotary tumbler. Then, thermal analysis ((Differential Scanning Microscopy (DSC) and Thermogravimetric Analysis (TGA)) was performed to characterize the thermal properties of the powder mixture. One of the most important factors affecting SLS production is the production parameters. In this study, composite samples and virgin PA 12 were produced with various SLS production parameters such as laser energy, scanning speed and hatch distance, and the effect of energy values on physical and mechanical properties were investigated. The mechanical properties of the samples were determined by impact tests. Also, the fracture surfaces of the studied samples were analysed.

PA 12 composite selective laser sintering (SLS) mechanical properties ceramic additives.

This project was supported by Yıldız Technical University Scientific Research Projects (YTU-BAPK) with project number FYL-2023-6036. This study was also supported by Fatih Sultan Mehmet Vakif University, Aluminum Test, Training and Research Center.

Abdulhameed, O., Al-Ahmari, A., Ameen, W., & Mian, S. H. (2019). Additive manufacturing: Challenges, trends, and applications. Advances in Mechanical Engineering, 11(2), 1687814018822880.

Chung, H., & Das, S. (2008). Functionally graded Nylon-11/silica nanocomposites produced by selective laser sintering. Materials Science and Engineering: A, 487(1-2), 251-257.

Chunze, Y., Yusheng, S., Jinsong, Y., & Jinhui, L. (2009). A nanosilica/nylon-12 composite powder for selective laser sintering. Journal of Reinforced Plastics and Composites, 28(23), 2889-2902.

Deckard, C. R. (1988). Selective Laser Sintering.

Espera, A. H., Dizon, J. R. C., Chen, Q., & Advincula, R. C. (2019). 3D-printing and advanced manufacturing for electronics. Progress in Additive Manufacturing, 4, 245-267.

Gibson, I., & Shi, D. (1997). Material properties and fabrication parameters in selective laser sintering process. Rapid prototyping journal, 3(4), 129-136.

Gu, D. (2015). Laser additive manufacturing of high-performance materials. Springer.

Han, W., Kong, L., & Xu, M. (2022). Advances in selective laser sintering of polymers. International Journal of Extreme Manufacturing, 4(4), 042002.

Marcus, H. L., Beeman, J. J., Barlow, J. W., Bourell, D. L., & Crawford, R. H. (1993). Solid Freeform Fabrication Symposium Proceedings Held in Austin, Texas on August 9-11, 1993.

ISO, I. (2016). 11357-1 Plastics—Differential Scanning Calorimetry (DSC) Part 1: General Principles. International Organization for Standardization: Geneva, Switzerland.

Kerns, J. (2015). What’s the difference between stereolithography and selective laser sintering. Machine Design, 17.

Kim, G. D., & Oh, Y. T. (2008). A benchmark study on rapid prototyping processes and machines: quantitative comparisons of mechanical properties, accuracy, roughness, speed, and material cost. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 222(2), 201-215.

Mohanavel, V., Ali, K. A., Ranganathan, K., Jeffrey, J. A., Ravikumar, M. M., & Rajkumar, S. (2021). The roles and applications of additive manufacturing in the aerospace and automobile sector. Materials Today: Proceedings, 47, 405-409.

Monfared, V., Bakhsheshi-Rad, H. R., Ramakrishna, S., Razzaghi, M., & Berto, F. (2021). A Brief Review on Additive Manufacturing of Polymeric Composites and Nanocomposites. Micromachines 2021, 12, 704.

Mousa, A. A. (2014). The Effects of Content and Surface Modification of Filler on the Mechanical Properties of Selective Laser Sintered Polyamide12 Composites. Jordan Journal of Mechanical & Industrial Engineering, 8(5), 265 - 274.

Özbay, B., & Serhatlı, İ. E. (2022). Processing and characterization of hollow glass-filled polyamide 12 composites by selective laser sintering method. Materials Technology, 37(4), 213-223.

Özbay, B., Bekem, A., Serhatlı, İ. E., Öztürk, S., & Bulduk, M. E. (2022). Effects of copper fillers on mechanical and electrical properties of selective laser sintered PA 12-Cu composites. Materials Technology, 37(10), 1541–1553.

Sachs, E., Cima, M., & Cornie, J. (1990). Three-dimensional printing: rapid tooling and prototypes directly from a CAD model. CIRP annals, 39(1), 201-204.

Wudy, K., & Drummer, D. (2019). Infiltration behavior of thermosets for use in a combined selective laser sintering process of polymers. JOM, 71(3), 920-927.