Development of in vitro Release Testing for Topical Semi-Solid Products of Dapsone

Seda Sari; Emine Kahraman; Sevgi Güngör

doi:10.26650/IstanbulJPharm.2025.1745307

Development of in vitro Release Testing for Topical Semi-Solid Products of Dapsone

Abstract

Objective: This study aimed to develop and optimise a regulatory-compliant in vitro release testing (IVRT) method for topical semi-solid products of dapsone. Methods: The IVRT method was designed based on the U.S. FDA and EMA guidelines. The analytical method for dapsone was developed using high performance liquid chromatography (HPLC) and validated according to ICH Q2(R1) guidelines. The IVRT parameters were optimised stepwise. Solubility studies were conducted to determine the most suitable receptor medium to ensure sink conditions. The membrane inertness was evaluated by assessing dapsone recovery in various synthetic membranes. In addition, equipment-related parameters such as sampling intervals and product dose amounts were optimised. Results: Solubility studies confirmed that dapsone exhibited higher solubility in phosphate-buffered saline (PBS), pH 7.4 : ethanol (60:40, v/v), which was selected as the receptor medium. Membrane inertness testing revealed that regenerated cellulose (RC) membranes provided the highest drug recovery, indicating minimal interaction with dapsone. The optimum IVRT conditions were identified as a receptor medium temperature of 32.0 ± 0.5°C, stirring speed of 500 rpm, and sampling intervals up to 6 h using a six-station vertical diffusion system. The 300 mg product dose provided the most favourable release profile, with the highest cumulative release and linearity coefficients (R² > 0.97), meeting the U.S. FDA acceptance criteria. Conclusion: This study proposed an IVRT method for the in vitro evaluation of semi-solid topical products of dapsone. The developed method may contribute to future quality control practices and support comparative studies of topical semi-solid products of dapsone.

Keywords

References

Al-Ghabeish, M., Xu, X., Krishnaiah, Y. S. R., Rahman, Z., Yang, Y., & Khan, M. A. (2015). Influence of drug loading and type of ointment base on the in vitro performance of acyclovir ophthalmic ointment. International Journal of Pharmaceutics, 495(1), 783–791. https://doi.org/10.1016/j.ijpharm.2015.08.096
Chang, R.-K., Raw, A., Lionberger, R., & Yu, L. X. (2013). Generic development of topical dermatologic products: Formulation development, process development, and testing of topical dermatologic products. AAPS Journal, 15(1), 41–52. https://doi.org/10.1208/s12248-012-9411-0
Chaves, L. L., Silveri, A., Vieira, A. C. C., Ferreira, D., Cristiano, M. C., Paolino, D., Di Marzio, L., Lima, S. C., Reis, S., Sarmento, B., & Celia, C. (2019). pH-responsive chitosan based hydrogels affect the release of dapsone: Design, set-up, and physicochemical characterization. International Journal of Biological Macro molecules, 133, 1268–1279. https://doi.org/10.1016/j.ijbiomac.2019.04.178
Dresser, G. K., & Wacher, V. J. (2002). Impact of pH on drug solubility and permeability in in vitro systems. Journal of Pharmaceutical Sciences, 91(5), 983–990. https://doi.org/10.1002/jps.10092
Dong, L., Liu, C., Cun, D., & Fang, L. (2015). The effect of rheological behavior and microstructure of the emulgels on the release and permeation profiles of Ter-pinen-4-ol. European Journal of Pharmaceutical Sciences, 78, 140–150. https://doi.org/10.1016/j.ejps.2015.07.003
European Medicines Agency. (2018). Guideline on quality and equivalence of locally applied, locally acting cutaneous products (CHMP/QWP/708282/2018). Committee for Medicinal Products for Human Use (CHMP). https://www.ema.europa.eu/en/documents/scientific-guideline/guideline-quality-equivalence-locally-applied-locally-acting-cutaneous-products_en.pdf“
International Conference on Harmonisation. (2005, November). Validation of analytical procedures: Text and methodology Q2(R1). ICH Harmonised Tripar-tite Guideline. https://database.ich.org/sites/default/files/Q2%28R1%29%20Guideline.pdf
Jiang, L., Huang, Y., Zhang, Q., He, H., Xu, Y., & Mei, X. (2014). Preparation and solid-state characterization of dapsone drug–drug co-crystals. Crystal Growth & Design, 14(9), 4562–4573. https://doi.org/10.1021/cg500668a

Klein, S. (2013). Influence of different test parameters on in vitro drug release from topical diclofenac formulations in a vertical diffusion cell setup. Pharmazie, 68(7), 565–571. https://doi.org/10.1691/ph.2013.6528
Klein, R. R., Heckart, J. L., & Thakker, K. D. (2018). In vitro release testing methodology and variability with the vertical diffusion cell (VDC). Dissolution Technologies, 25(3), 52–61. https://doi.org/10.14227/DT250318P52
Krishnaiah, Y. S. R., Xu, X., Rahman, Z., Yang, Y., Katragadda, U., Lionberger, R., Peters, J. R., Uhl, K., & Khan, M. A. (2014). Development of performance matrix for generic product equivalence of acyclovir topical creams. International Journal of Pharmaceutics, 475(1–2), 110–122. https://doi.org/10.1016/j.ijpharm.2014.07.034
Lusina Kregar, M., Dürrigl, M., Rožman, A., Jelčić, Ž., Cetina-Čižmek, B., & Filipović-Grčić, J. (2015). Development and validation of an in vitro release method for topical particulate delivery systems. International Journal of Pharmaceutics, 485(1–2), 202–214. https://doi.org/10.1016/j.ijpharm.2015.03.018
Manian, M., Jain, P., Vora, D., & Banga, A. K. (2022). Formulation and evaluation of the in vitro performance of topical dermatological products containing diclofenac sodium. Pharmaceutics, 14(9), 1892. https://doi.org/10.3390/pharmaceutics14091892
Ng, S. F., Rouse, J. J., Sanderson, F. D., & Eccleston, G. M. (2012). The relevance of polymeric synthetic membranes in topical formulation assessment and drug diffusion study. Archives of Pharmacal Research, 35(4), 579–593. doi: 10.1007/s12272-012-0401-7
Ostrenga, J., Haleblian, J., Poulsen, B., Ferrell, B., Mueller, N., & Shastri, S. (1971). Vehicle design for a new topical steroid, fluocinonide. Journal of Investigative Dermatology, 56(5), 392–399. DOI: https://doi.org/10.1111/1523-1747.ep12261282
Sesto Cabral, M. E., Ramos, A. N., Cabrera, C. A., Valdez, J. C., & González, S. N. (2014). Equipment and method for in vitro release measurements on topical dosage forms. Pharmaceutical Development and Technology, 19(1), 1–7. https://doi.org/10.3109/10837450.2014.908308
Shah, V. P., Elkins, J. S., & Williams, R. L. (1999). Evaluation of the test system used for in vitro release of drugs for topical dermatological drug products. Pharmaceutical Development and Technology, 4(3), 377–385. https://doi.org/10.1081/PDT-100101373
Shah, V. P., Elkins, J., Shaw, S., & Hanson, R. (2003). In vitro release: Comparative evaluation of vertical diffusion cell system and automated procedure. Pharmaceutical Development and Technology, 8(1), 97–102. https://doi.org/10.1081/pdt-120017528
Shah, V. P., & Williams, R. L. (2014). Topical drug bioavailability, bioequivalence, and penetration. In Topical Drug Bioavailability, Bioequivalence, an and Penetration (pp. 61–67). https://doi.org/10.1007/978-1-4939-1289-6
Shah, V. P., Yacobi, A., Rădulescu, F. Ș., Miron, D. S., & Lane, M. E. (2015). A science based approach to topical drug classification system (TCS). International Journal of Pharmaceutics, 491(1–2), 21–25. https://doi.org/10.1016/j.ijpharm.2015.06.011
Thakker, K., & Klein, R. (2020). Drug release: Topical products. In J. E. Aguilar & T. M. Moran (Eds.), Specification of Drug Substances and Products (pp. 505–534). Elsevier. https://doi.org/10.1016/b978-0-08-102824-7.00019-1
Tiffner, K. I., Kanfer, I., Augustin, T., Raml, R., Raney, S. G., & Sinner, F. (2018). A comprehensive approach to qualify and validate the essential parameters of an in vitro release test (IVRT) method for acyclovir cream, 5%. International Journal of Pharmaceutics, 535(1–2), 217–227. https://doi.org/10.1016/j.ijpharm.2017.09.049
Tsume, Y., & Rohan, L. C. (2018). In vitro release testing methods for semisolid dosage forms. Dissolution Technologies, 25(4), 36–43. https://doi.org/10.14227/DT250418P36
United States Pharmacopeia. (2011). Chapter 〈1724〉 Semisolid drug products—Performance tests. In USP 37 (pp. 1273–1284). United States Pharmacopeial Convention.
U.S. Food and Drug Administration. (1997). Guidance for industry: Nonsterile semisolid dosage forms—Scaleup and postapproval changes (SUPACSS): Chemistry, manufacturing, and controls; in vitro release testing and in vivo bioequivalence documentation. U.S. Department of Health and Human Services.
U.S. Food and Drug Administration. (2022). In vitro release test studies for topical drug products submitted in ANDAs: Guidance for industry. https://www.fda.gov/media/162476/download
U.S. Food and Drug Administration. (2022). Productspecific guidance: Ivermectin. https://www.accessdata.fda.gov/drugsatfda_docs/psg/PSG_206255.pdf
U.S. Food and Drug Administration. (2024). Productspecific guidance: Azelaic acid. https://www.accessdata.fda.gov/drugsatfda_docs/psg/PSG_021470.pdf
U.S. Food and Drug Administration. (2024). Productspecific guidance: Dapsone. https://www.accessdata.fda.gov/drugsatfda_docs/psg/PSG_021794.pdf
U.S. Food and Drug Administration. (2025). Productspecific guidance: Roflumilast. https://www.accessdata.fda.gov/drugsatfda_docs/psg/PSG_215985.pdf
U.S. Food and Drug Administration. (2025). Productspecific guidance: Terbinafine. https://www.accessdata.fda.gov/drugsatfda_docs/psg/PSG_021958.pdf
Yacobi, A., Shah, V. P., Bashaw, E. D., Benfeldt, E., Davit, B., Ganes, D., Ghosh, T., Kanfer, I., Kasting, G. B., Katz, L., Lionberger, R., Lu, G. W., Maibach, H. I., Pershing, L. K., Rackley, R. J., Raw, A., Shukla, C. G., Thakker, K., Wagner, N., Zovko, E., & Lane, M. E. (2014). Current challenges in bioequivalence, quality, and novel assessment technologies for topical products. Pharmaceutical Research, 31, 837–846. https://doi.org/10.1007/s11095-013-1259-1

Details

Primary Language

English

Subjects

Pharmacology and Pharmaceutical Sciences (Other)

Journal Section

Research Article

Authors

Seda Sari
0009-0004-8966-1442
Türkiye

Emine Kahraman
0000-0001-5911-9151
Türkiye

Sevgi Güngör ^*
0000-0002-8199-3010
Türkiye

Publication Date

January 14, 2026

Submission Date

July 18, 2025

Acceptance Date

August 24, 2025

Published in Issue

Year 2025 Volume: 55 Number: 3

DOI

https://doi.org/10.26650/IstanbulJPharm.2025.1745307

IZ

https://izlik.org/JA65UG34TC

Cite

RIS / Bibtex

APA

Sari, S., Kahraman, E., & Güngör, S. (2026). Development of in vitro Release Testing for Topical Semi-Solid Products of Dapsone. İstanbul Journal of Pharmacy, 55(3), 343-351. https://doi.org/10.26650/IstanbulJPharm.2025.1745307

AMA

1.Sari S, Kahraman E, Güngör S. Development of in vitro Release Testing for Topical Semi-Solid Products of Dapsone. iujp. 2026;55(3):343-351. doi:10.26650/IstanbulJPharm.2025.1745307

Chicago

Sari, Seda, Emine Kahraman, and Sevgi Güngör. 2026. “Development of in Vitro Release Testing for Topical Semi-Solid Products of Dapsone”. İstanbul Journal of Pharmacy 55 (3): 343-51. https://doi.org/10.26650/IstanbulJPharm.2025.1745307.

EndNote

Sari S, Kahraman E, Güngör S (January 1, 2026) Development of in vitro Release Testing for Topical Semi-Solid Products of Dapsone. İstanbul Journal of Pharmacy 55 3 343–351.

IEEE

[1]S. Sari, E. Kahraman, and S. Güngör, “Development of in vitro Release Testing for Topical Semi-Solid Products of Dapsone”, iujp, vol. 55, no. 3, pp. 343–351, Jan. 2026, doi: 10.26650/IstanbulJPharm.2025.1745307.

ISNAD

Sari, Seda - Kahraman, Emine - Güngör, Sevgi. “Development of in Vitro Release Testing for Topical Semi-Solid Products of Dapsone”. İstanbul Journal of Pharmacy 55/3 (January 1, 2026): 343-351. https://doi.org/10.26650/IstanbulJPharm.2025.1745307.

JAMA

1.Sari S, Kahraman E, Güngör S. Development of in vitro Release Testing for Topical Semi-Solid Products of Dapsone. iujp. 2026;55:343–351.

MLA

Sari, Seda, et al. “Development of in Vitro Release Testing for Topical Semi-Solid Products of Dapsone”. İstanbul Journal of Pharmacy, vol. 55, no. 3, Jan. 2026, pp. 343-51, doi:10.26650/IstanbulJPharm.2025.1745307.

Vancouver

1.Seda Sari, Emine Kahraman, Sevgi Güngör. Development of in vitro Release Testing for Topical Semi-Solid Products of Dapsone. iujp. 2026 Jan. 1;55(3):343-51. doi:10.26650/IstanbulJPharm.2025.1745307