Manufacturing methods of functionally graded materials: a comprehensive review

Burak İkinci

Manufacturing methods of functionally graded materials: a comprehensive review

Abstract

Various problems arise in traditional composites and the gradient of these materials needs to be controlled for more specific purposes. At this stage, functionally graded materials, which are a more specific area of advanced composites, come into play. High strength-to-weight ratio, wear resistance, thermal insulation, controlled porosity and many other features can be obtained by using functionally graded materials. A wide variety of functionally graded materials and their manufacturing methods are available. In this study, the classifications of properties of functionally graded materials and manufacturing methods in the literature are examined. The basic principles for each method are presented. In addition to the advantages and disadvantages of the methods, the difficulties in the production phase are also examined.

Keywords

References

Wang, S. S. (1983). Fracture mechanics for delamination problems in composite materials. Journal of Composite Materials, 17(3), 210-223. https://doi.org/10.1177/002199838301700302
Gürdal, Z., Haftka, R. T., & Hajela, P. (1999). Design and optimization of laminated composite materials. John Wiley & Sons.
Nikbakt, S. K. M. S. S., Kamarian, S., & Shakeri, M. (2018). A review on optimization of composite structures Part I: Laminated composites. Composite Structures, 195, 158-185. https://doi.org/10.1016/j.compstruct.2018.03.063
Şimşek, M. (2015). Bi-directional functionally graded materials (BDFGMs) for free and forced vibration of Timoshenko beams with various boundary conditions. Composite Structures, 133, 968-978.https://doi.org/10.1016/j.compstruct.2015.08.021
Najibi, A., & Mokhtari, T. (2023). Functionally graded materials for knee and hip arthroplasty; an update on design, optimization, and manufacturing. Composite Structures, 117350. https://doi.org/10.1016/j.compstruct.2023.117350
El-Galy, I. M., Saleh, B. I., & Ahmed, M. H. (2019). Functionally graded materials classifications and development trends from industrial point of view. SN Applied Sciences, 1, 1-23. https://doi.org/10.1007/s42452-019-1413-4
Gasik, M. M. (1998). Micromechanical modelling of functionally graded materials. Computational Materials Science, 13(1-3), 42-55. https://doi.org/10.1016/S0927-0256(98)00044-5
Zhang, R., Jiang, F., Xue, L., & Yu, J. (2022). Review of additive manufacturing techniques for large-scale metal functionally graded materials. Crystals, 12(6), 858. https://doi.org/10.3390/cryst12060858

Yao, L., Ramesh A., Xiao, Z., Chen, Y., & Zhuang, Q. (2023). Multimetal research in powder bed fusion: a review. Materials, 16(12), 4287. https://doi.org/10.3390/ma16124287
Mahmoud, D., & Elbestawi, M. A. (2017). Lattice structures and functionally graded materials applications in additive manufacturing of orthopedic implants: a review. Journal of Manufacturing and Materials Processing, 1(2), 13. https://doi.org/10.3390/jmmp1020013
Zhang, C., Chen, F., Huang, Z., Jia, M., Chen, G., Ye, Y., ... & Lavernia, E. J. (2019). Additive manufacturing of functionally graded materials: A review. Materials Science and Engineering: A, 764, 138209. https://doi.org/10.1016/j.msea.2019.138209
Wei, C., Sun, Z., Chen, Q., Liu, Z., & Li, L. (2019). Additive manufacturing of horizontal and 3D functionally graded 316L/Cu10Sn components via multiple material selective laser melting. Journal of Manufacturing Science and Engineering, 141(8), 081014. https://doi.org/10.1115/1.4043983
Nemat-Alla, M. (2003). Reduction of thermal stresses by developing two-dimensional functionally graded materials. International journal of solids and structures, 40(26), 7339-7356. https://doi.org/10.1016/j.ijsolstr.2003.08.017
Sharma, P., & Khinchi, A. (2023). Finite element modeling of two-directional FGM beams under hygrothermal effect. International Journal on Interactive Design and Manufacturing (IJIDeM), 1-8. https://doi.org/10.1007/s12008-022-01190-8
Ghazwani, M. H., Alnujaie, A., Avcar, M., & Van Vinh, P. (2024). Examination of the high-frequency behavior of functionally graded porous nanobeams using nonlocal simple higher-order shear deformation theory. Acta Mechanica, 1-20. https://doi.org/10.1007/s00707-024-03858-6
Zhang, J. Z., McAvoy, D. T., Halpern, B. L., Schmitt, J. J., Zanoni, R., & Schaschek, K. (1994). Jet vapor deposition of organic guest-inorganic host thin films for optical and electronic applications. Journal of electronic materials, 23, 1239-1244. https://doi.org/10.1007/BF02649976
Wood, M., & Ward-Close, M. (1995). Fibre-reinforced intermetallic compounds by physical vapour deposition. Materials Science and Engineering: A, 192, 590-596. https://doi.org/10.1016/0921-5093(94)03282-3
Groves, J. F., & Wadley, H. N. G. (1997). Functionally graded materials synthesis via low vacuum directed vapor deposition. Composites Part B: Engineering, 28(1-2), 57-69. https://doi.org/10.1016/S1359-8368(96)00023-6
Fathi, R., Wei, H., Saleh, B., Radhika, N., Jiang, J., Ma, A., Ostrikov, K. K. (2022). Past and present of functionally graded coatings: Advancements and future challenges. Applied Materials Today, 26, 101373.. https://doi.org/10.1016/j.apmt.2022.101373
Saeed, M., Alshammari, Y., Majeed, S. A., & Al-Nasrallah, E. (2020). Chemical vapour deposition of graphene—Synthesis, characterisation, and applications: A review. Molecules, 25(17), 3856. https://doi.org/10.3390/molecules25173856
Nur-E-Alam, M., Basher, M. K., Vasiliev, M., & Das, N. (2021). Physical vapor-deposited silver (Ag)-based metal-dielectric nanocomposites for thin-film and coating applications. Applied Sciences, 11(15), 6746. https://doi.org/10.3390/app11156746
Bhavar, V., Kattire, P., Thakare, S., & Singh, R. K. P. (2017, September). A review on functionally gradient materials (FGMs) and their applications. In IOP conference series: materials science and engineering, 229(1), 012021. https://doi.org/10.1088/1757-899X/229/1/012021
Grammes, T., Emmerich, T., & Aktaa, J. (2021). W/EUROFER functionally graded coatings for plasma facing components: Technology transfer to industry and upscaling. Fusion Engineering and Design, 173, 112940. https://doi.org/10.1016/j.fusengdes.2021.112940
Ramesh, M., Karthik, A., James, D. J. D., & Pandiyan, G. K. (2023). Functionally graded materials: review on manufacturing by Liquid and gas based techniques. Materials Research Express, 10(8), 085305. https://doi.org/10.1088/2053-1591/acf1f1
Hirai, T., & Sasaki, M. (1991). Vapor-deposited functionally gradient materials. JSME international journal. Ser. 1, Solid mechanics, strength of materials, 34(2), 123-129. https://doi.org/10.1299/jsmea1988.34.2_123
Choy, K. L. (2003). Chemical vapour deposition of coatings. Progress in materials science, 48(2), 57-170. https://doi.org/10.1016/S0079-6425(01)00009-3
Wang, X., Chu, X., Zhao, H., Lu, S., Fang, F., Li, J., ... & Wang, X. (2014). Controllable growth of functional gradient ZnO material using chemical vapor deposition. Integrated Ferroelectrics, 151(1), 1-6. https://doi.org/10.1080/10584587.2014.898552
Jin, G., Takeuchi, M., Honda, S., Nishikawa, T., & Awaji, H. (2005). Properties of multilayered mullite/Mo functionally graded materials fabricated by powder metallurgy processing. Materials Chemistry and Physics, 89(2-3), 238-243. https://doi.org/10.1016/j.matchemphys.2004.03.031
Übeyli, M., Balci, E., Sarikan, B., Öztaş, M. K., Camuşcu, N., Yildirim, R. O., & Keleş, Ö. (2014). The ballistic performance of SiC–AA7075 functionally graded composite produced by powder metallurgy. Materials & Design, 56, 31-36. https://doi.org/10.1016/j.matdes.2013.10.092
Erdemir, F., Canakci, A., & Varol, T. (2015). Microstructural characterization and mechanical properties of functionally graded Al2024/SiC composites prepared by powder metallurgy techniques. Transactions of Nonferrous Metals Society of China, 25(11), 3569-3577. https://doi.org/10.1016/S1003-6326(15)63996-6
Tripathy, A., Sarangi, S. K., & Panda, R. (2017). Fabrication of functionally graded composite material using powder metallurgy route: an overview. Int. J. Mech. Prod. Eng. Res. Dev, 7(6), 135-145.
Liang, J., Zhang, G., Zhou, Y., Song, S., Zuo, X., & Wang, H. (2022). The Microstructure and the Properties of 304 and 430 Steel Foams Prepared by Powder Metallurgy Using CaCl2 as a Space Holder. Metals, 12(7), 1182. https://doi.org/10.3390/met12071182
Mishra, S. K., & Pathak, L. C. (2009). Self-propagating high-temperature synthesis (SHS) of advanced high-temperature ceramics. Key Engineering Materials, 395, 15-38. https://doi.org/10.4028/www.scientific.net/KEM.395.15
Yong, C., Xunjia, S., Genliang, H., & YaKun, X. (2013, March). Research on self-propagating high temperature synthesis prepared ZrC-ZrB2 composite ceramic. In Journal of Physics: Conference Series., 419(1), 012057. IOP Publishing. https://doi.org/10.1088/1742-6596/419/1/012057
Parihar, R. S., Setti, S. G., & Sahu, R. K. (2018). Recent advances in the manufacturing processes of functionally graded materials: a review. Science and Engineering of Composite Materials, 25(2), 309-336. https://doi.org/10.1[]5/secm-2015-0395
Liechty, B. C., & Webb, B. W. (2008). Flow field characterization of friction stir processing using a particle-grid method. Journal of Materials Processing Technology, 208(1-3), 431-443. https://doi.org/10.1016/j.jmatprotec.2008.01.008
Karthikeyan, L., Senthilkumar, V. S., & Padmanabhan, K. A. (2010). On the role of process variables in the friction stir processing of cast aluminum A319 alloy. Materials & Design, 31(2), 761-771. https://doi.org/10.1016/j.matdes.2009.08.001
Fu, P. X., Kang, X. H., Ma, Y. C., Liu, K., Li, D. Z., & Li, Y. Y. (2008). Centrifugal casting of TiAl exhaust valves. Intermetallics, 16(2), 130-138. https://doi.org/10.1016/j.intermet.2007.08.007
Rajan, T. P. D., Pillai, R. M., & Pai, B. C. (2008). Centrifugal casting of functionally graded aluminium matrix composite components. International Journal of Cast Metals Research, 21(1-4), 214-218. https://doi.org/10.1179/136404608X361972
Sobczak, J. J., & Drenchev, L. (2013). Metallic functionally graded materials: a specific class of advanced composites. Journal of Materials Science & Technology, 29(4), 297-316. https://doi.org/10.1016/j.jmst.2013.02.006
Singh, S. P., Rohith, R. P., Nirmal, S. F., Raja, D. E., & Ravichandran, P. (2024). Improvement in manufacturing of aluminium-based functionally graded materials through centrifugal casting—A review. Engineering Proceedings, 61(1), 16. https://doi.org/10.3390/engproc2024061016
Mercadelli, E., Sanson, A., Pinasco, P., Roncari, E., & Galassi, C. (2010). Tape cast porosity-graded piezoelectric ceramics. Journal of the European Ceramic Society, 30(6), 1461-1467. https://doi.org/10.1016/j.jeurceramsoc.2009.12.004
Schafföner, S., & Aneziris, C. G. (2012). Pressure slip casting of coarse grain oxide ceramics. Ceramics International, 38(1), 417-422. https://doi.org/10.1016/j.ceramint.2011.06.064
Baskin, D. M., Zimmerman, M. H., Faber, K. T., & Fuller, E. R. (1997). Forming single‐phase laminates via the gelcasting technique. Journal of the American Ceramic Society., 80(11), 2929-2932. https://doi.org/10.1111/j.1151-2916.1997.tb03213.x
Zimmerman, M. H., Faber, K. T., & Fuller Jr, E. R. (1997). Forming textured microstructures via the gelcasting technique. Journal of the American Ceramic Society, 80(10), 2725-2729. https://doi.org/10.1111/j.1151-2916.1997.tb03184.x
Topateş, G., Akça, E., Tür, Y. K., & Duran, C. (2024). Functionally graded Al2O3‐based ceramic systems by gel casting method. International Journal of Applied Ceramic Technology, 22(1), e14898. https://doi.org/10.1111/ijac.14898
Sofie, S. W. (2007). Fabrication of functionally graded and aligned porosity in thin ceramic substrates with the novel freeze–tape‐casting process. Journal of the American Ceramic Society, 90(7), 2024-2031. https://doi.org/10.1111/j.1551-2916.2007.01720.x
Scanlan, M., Browne, D. J., & Bates, A. (2005). New casting route to novel functionally gradient light alloys. Materials Science and Engineering: A, 413, 66-71. https://doi.org/10.1016/j.msea.2005.09.004
Rahvard, M. M., Tamizifar, M., Boutorabi, M. A., & Shiri, S. G. (2014). Effect of superheat and solidified layer on achieving good metallic bond between A390/A356 alloys fabricated by cast-decant-cast process. Transactions of Nonferrous Metals Society of China, 24(3), 665-672. https://doi.org/10.1016/S1003-6326(14)63109-5
Kruth, J. P. (1991). Material incress manufacturing by rapid prototyping techniques. CIRP annals, 40(2), 603-614. https://doi.org/10.1016/S0007-8506(07)61136-6
Bikas, H., Stavropoulos, P., & Chryssolouris, G. (2016). Additive manufacturing methods and modelling approaches: a critical review. The International Journal of Advanced Manufacturing Technology, 83, 389-405. https://doi.org/10.1007/s00170-015-7576-2
Guessasma, S., Tao, L., Belhabib, S., Zhu, J., Zhang, W., & Nouri, H. (2018). Analysis of microstructure and mechanical performance of polymeric cellular structures designed using stereolithography. European Polymer Journal, 98, 72-82. https://doi.org/10.1016/j.eurpolymj.2017.10.034
Pagac, M., Hajnys, J., Ma, Q. P., Jancar, L., Jansa, J., Stefek, P., & Mesicek, J. (2021). A review of vat photopolymerization technology: materials, applications, challenges, and future trends of 3D printing. Polymers, 13(4), 598. https://doi.org/10.3390/polym13040598
Wang, J., & Shaw, L. L. (2006). Fabrication of functionally graded materials via inkjet color printing. Journal of the American Ceramic Society, 89(10), 3285-3289. https://doi.org/10.1111/j.1551-2916.2006.01206.x
Chen, Y., Ye, L., Kinloch, A. J., & Zhang, Y. X. (2022). 3D printed carbon-fibre reinforced composite lattice structures with good thermal-dimensional stability. Compos. Sci. Technol., 227, 109599. https://doi.org/10.1016/j.compscitech.2022.109599
Garg, A., Sharma, A., Zheng, W., & Li, L. (2025). A review on artificial intelligence-enabled mechanical analysis of 3D printed and FEM-modelled auxetic metamaterials. Virtual and Physical Prototyping, 20(1), e2445712. https://doi.org/10.1080/17452759.2024.2445712
Wang, Y., Müller, W. D., Rumjahn, A., & Schwitalla, A. (2020). Parameters influencing the outcome of additive manufacturing of tiny medical devices based on PEEK. Materials, 13(2), 466. https://doi.org/10.3390/ma13020466
Alkunte, S., Fidan, I., Naikwadi, V., Gudavasov, S., Ali, M. A., Mahmudov, M., ... & Cheepu, M. (2024). Advancements and Challenges in Additively Manufactured Functionally Graded Materials: A Comprehensive Review. Journal of Manufacturing and Materials Processing, 8(1), 23. https://doi.org/10.3390/jmmp8010023
Sireesha, M., Lee, J., Kiran, A. S. K., Babu, V. J., Kee, B. B., & Ramakrishna, S. (2018). A review on additive manufacturing and its way into the oil and gas industry. RSC advances, 8(40), 22460-22468. https://doi.org/10.1039/C8RA03194K
Nian, Y., Wan, S., Avcar, M., Yue, R., & Li, M. (2023). 3D printing functionally graded metamaterial structure: Design, fabrication, reinforcement, optimization. International Journal of Mechanical Sciences, 258, 108580. https://doi.org/10.1016/j.ijmecsci.2023.108580
Han, C., Li, Y., Wang, Q., Cai, D., Wei, Q., Yang, L., ... & Shi, Y. (2018). Titanium/hydroxyapatite (Ti/HA) gradient materials with quasi-continuous ratios fabricated by SLM: material interface and fracture toughness. Materials & Design, 141, 256-266. https://doi.org/10.1016/j.matdes.2017.12.037
Ansari, P., Rehman, A. U., Pitir, F., Veziroglu, S., Mishra, Y. K., Aktas, O. C., & Salamci, M. U. (2021). Selective laser melting of 316l austenitic stainless steel: Detailed process understanding using multiphysics simulation and experimentation. Metals, 11(7), 1076. https://doi.org/10.3390/met11071076
Del Val, J., Arias-González, F., Barro, O., Riveiro, A., Comesaña, R., Penide, J., ... & Pou, J. (2017). Functionally graded 3D structures produced by laser cladding. Procedia Manufacturing, 13, 169-176. https://doi.org/10.1016/j.promfg.2017.09.029
Lai, Q., Abrahams, R., Yan, W., Qiu, C., Mutton, P., Paradowska, A., & Soodi, M. (2017). Investigation of a novel functionally graded material for the repair of premium hypereutectoid rails using laser cladding technology. Composites Part B: Engineering, 130, 174-191. https://doi.org/10.1016/j.compositesb.2017.07.089
Liu, W., & DuPont, J. N. (2003). Fabrication of functionally graded TiC/Ti composites by laser engineered net shaping. Scripta Materialia, 48(9), 1337-1342. https://doi.org/10.1016/S1359-6462(03)00020-4
Kim, H., Cong, W., Zhang, H. C., & Liu, Z. (2017). Laser engineered net shaping of nickel-based superalloy Inconel 718 powders onto AISI 4140 alloy steel substrates: Interface bond and fracture failure mechanism. Materials, 10(4), 341. https://doi.org/10.3390/ma10040341
Rahmani, R., Lopes, S. I., & Prashanth, K. G. (2023). Selective laser melting and spark plasma sintering: a perspective on functional biomaterials. Journal of Functional Biomaterials, 14(10), 521. https://doi.org/10.3390/jfb14100521
Tofail, S. A., Koumoulos, E. P., Bandyopadhyay, A., Bose, S., O’Donoghue, L., & Charitidis, C. (2018). Additive manufacturing: scientific and technological challenges, market uptake and opportunities. Materials today, 21(1), 22-37. https://doi.org/10.1016/j.mattod.2017.07.001
Pompe, W., Worch, H., Epple, M., Friess, W., Gelinsky, M., Greil, P., ... & Schulte, K. J. M. S. (2003). Functionally graded materials for biomedical applications. Materials Science and Engineering: A, 362(1-2), 40-60. https://doi.org/10.1016/S0921-5093(03)00580-X
Murr, L. E., Martinez, E., Amato, K. N., Gaytan, S. M., Hernandez, J., Ramirez, D. A., ... & Wicker, R. B. (2012). Fabrication of metal and alloy components by additive manufacturing: examples of 3D materials science. Journal of Materials Research and Technology, 1(1), 42-54. https://doi.org/10.1016/S2238-7854(12)70009-1
Corbin, S. F., Zhao-Jie, X., Henein, H., & Apte, P. S. (1999). Functionally graded metal/ceramic composites by tape casting, lamination and infiltration. Materials Science and Engineering: A, 262(1-2), 192-203. https://doi.org/10.1016/S0921-5093(98)01019-3
Zahedi, A. M., Rezaie, H. R., Javadpour, J., Mazaheri, M., & Haghighi, M. G. (2009). Processing and impact behavior of Al/SiCp composites fabricated by the pressureless melt infiltration method. Ceramics International, 35(5), 1919-1926. https://doi.org/10.1016/j.ceramint.2008.10.024
Drevet, R., Fauré, J., & Benhayoune, H. (2024). Electrophoretic Deposition of Bioactive Glass Coatings for Bone Implant Applications: A Review. Coatings, 14(9), 1084. https://doi.org/10.3390/coatings14091084
Ghosh, S., Haldar, S., Gupta, S., Chauhan, S., Mago, V., Roy, P., & Lahiri, D. (2022). Single unit functionally graded bioresorbable electrospun scaffold for scar-free full-thickness skin wound healing. Biomaterials Advances, 139, 212980. https://doi.org/10.1016/j.bioadv.2022.212980
Li, D., & Xia, Y. (2004). Electrospinning of nanofibers: reinventing the wheel?. Advanced materials, 16(14), 1151-1170. https://doi.org/10.1002/adma.200400719
Greiner, A., & Wendorff, J. H. (2007). Electrospinning: a fascinating method for the preparation of ultrathin fibers. Angewandte Chemie International Edition, 46(30), 5670-5703. https://doi.org/10.1002/anie.200604646
Qasim, S. B., Najeeb, S., Delaine-Smith, R. M., Rawlinson, A., & Rehman, I. U. (2017). Potential of electrospun chitosan fibers as a surface layer in functionally graded GTR membrane for periodontal regeneration. Dental Materials, 33(1), 71-83. https://doi.org/10.1016/j.dental.2016.10.003
Russo, F., Ursino, C., Avruscio, E., Desiderio, G., Perrone, A., Santoro, S., ... & Figoli, A. (2020). Innovative Poly (Vinylidene Fluoride)(PVDF) electrospun nanofiber membrane preparation using DMSO as a low toxicity solvent. Membranes, 10(3), 36. https://doi.org/10.3390/membranes10030036
Jayachandran, M., Tsukamoto, H., Sato, H., & Watanabe, Y. (2013). Formation Behavior of Continuous Graded Composition in Ti‐ZrO2 Functionally Graded Materials Fabricated by Mixed‐Powder Pouring Method. Journal of Nanomaterials, 2013(1), 504631. https://doi.org/10.1155/2013/504631
Pakseresht, A. H., Ghasali, E., Nejati, M., Shirvanimoghaddam, K., Javadi, A. H., & Teimouri, R. (2015). Development empirical-intelligent relationship between plasma spray parameters and coating performance of Yttria-Stabilized Zirconia. The International Journal of Advanced Manufacturing Technology, 76, 1031-1045. https://doi.org/10.1007/s00170-014-6212-x
Lim, Y. M., Park, Y. J., Yun, Y. H., & Hwang, K. S. (2002). Functionally graded Ti/HAP coatings on Ti–6Al–4V obtained by chemical solution deposition. Ceramics International, 28(1), 37-41. https://doi.org/10.1016/S0272-8842(01)00055-4
Besra, L., & Liu, M. (2007). A review on fundamentals and applications of electrophoretic deposition (EPD). Progress in Materials Science, 52(1), 1-61. https://doi.org/10.1016/j.pmatsci.2006.07.001
Shailesh, P., Sundarrajan, S., & Komaraiah, M. (2014). Optimization of process parameters of Al-Si alloy by centrifugal casting technique using Taguchi design of experiments. Procedia Materials Science, 6, 812-820. https://doi.org/10.1016/j.mspro.2014.07.098
Arsha, A. G., Jayakumar, E., Rajan, T. P. D., Antony, V., & Pai, B. C. (2015). Design and fabrication of functionally graded in-situ aluminium composites for automotive pistons. Materials & Design, 88, 1201-1209. https://doi.org/10.1016/j.matdes.2015.09.099
Wang, F., Jiang, K., & Xu, X. (2009). Gel casting of stainless steel powder through mold DIS process. Tsinghua Science and Technology, 14(S1), 216-222. https://doi.org/10.1016/S1007-0214(09)70095-1
Tallon, C., & Franks, G. V. (2011). Recent trends in shape forming from colloidal processing: A review. Journal of the Ceramic Society of Japan, 119(1387), 147-160. https://doi.org/10.2109/jcersj2.119.147
Yeo, J. G., Jung, Y. G., & Choi, S. C. (1998). Design and microstructure of ZrO2/SUS316 functionally graded materials by tape casting. Materials Letters, 37(6), 304-311. https://doi.org/10.1016/S0167-577X(98)00111-6
Fu, C., Chan, S. H., Liu, Q., Ge, X., & Pasciak, G. (2010). Fabrication and evaluation of Ni-GDC composite anode prepared by aqueous-based tape casting method for low-temperature solid oxide fuel cell. International Journal of Hydrogen Energy, 35(1), 301-307. https://doi.org/10.1016/j.ijhydene.2009.09.101
Katayama, T., Sukenaga, S., Saito, N., Kagata, H., & Nakashima, K. (2011, October). Fabrication of Al2O3-W functionally graded materials by slipcasting method. In IOP Conference Series: Materials Science and Engineering, 18(20), 202023. IOP Publishing. http://dx.doi.org/10.1088/1757-899X/18/20/202023
Bulatova, R., Bahl, C., Andersen, K., Kuhn, L. T., & Pryds, N. (2015). Functionally Graded Ceramics Fabricated with Side‐by‐Side Tape Casting for Use in Magnetic Refrigeration. International Journal of Applied Ceramic Technology, 12(4), 891-898. https://doi.org/10.1111/ijac.12298
Santos, L. N. R. M., Silva, J. R. S., Cartaxo, J. M., Rodrigues, A. M., Neves, G. A., & Menezes, R. R. (2021). Freeze-casting applied to ceramic materials: a short review of the influence of processing parameters. Ceramica, 67, 1-13. https://doi.org/10.1590/0366-69132021673812923
Anandavel, B., Mohamed Nazirudeen, S. S., Anburaj, J., & Angelo, P. C. (2015). Development and Characterization of Functionally Gradient Al–Si Alloy Using Cast-Decant-Cast Process. Transactions of the Indian Institute of Metals, 68, 137-145. https://doi.org/10.1007/s12666-015-0527-7
Nagarajan, D., & Mohana Sivam, P. (2016). Microstructure and Wear Behavior of a Functionally Gradient Al–Si Alloy Prepared Using the Cast–Decant–Cast (CDC) Process. Materials Performance and Characterization, 5(5), 637-647. https://doi.org/10.1520/MPC20160055
Hanaor, D., Michelazzi, M., Veronesi, P., Leonelli, C., Romagnoli, M., & Sorrell, C. (2011). Anodic aqueous electrophoretic deposition of titanium dioxide using carboxylic acids as dispersing agents. Journal of the European Ceramic Society, 31(6), 1041-1047. https://doi.org/10.1016/j.jeurceramsoc.2010.12.017
Farnoush, H., Mohandesi, J. A., & Çimenoğlu, H. (2015). Micro-scratch and corrosion behavior of functionally graded HA-TiO2 nanostructured composite coatings fabricated by electrophoretic deposition. Journal of the Mechanical Behavior of Biomedical Materials, 46, 31-40. https://doi.org/10.1016/j.jmbbm.2015.02.021
F42 Committee. (2016). Terminology for additive manufacturing-general principles-terminology. ASTM International.
Halloran, J. W. (2016). Ceramic stereolithography: additive manufacturing for ceramics by photopolymerization. Annual Review of Materials Research, 46(1), 19-40. https://doi.org/10.1146/annurev-matsci-070115-031841
Li, L., Bellehumeur C, S., & Gu, P. (2001). Composite modeling and analysis of FDM prototypes for design and fabrication of functionally graded parts. http://dx.doi.org/10.26153/tsw/3262
Cho, J. R., & Ha, D. (2002). Optimal tailoring of 2D volume-fraction distributions for heat-resisting functionally graded materials using FDM. Computer Methods in Applied Mechanics and Engineering, 191(29-30), 3195-3211. https://doi.org/10.1016/S0045-7825(02)00256-6
Scaffaro, R., Lopresti, F., Maio, A., Sutera, F., & Botta, L. (2017). Development of polymeric functionally graded scaffolds: A brief review. Journal of Applied Biomaterials & Functional Materials, 15(2), 107-121. https://doi.org/10.5301/jabfm.5000332
Lowen, J. M., & Leach, J. K. (2020). Functionally graded biomaterials for use as model systems and replacement tissues. Advanced functional materials, 30(44), 1909089. https://doi.org/10.1002/adfm.201909089
Hong, C. Q., Zhang, X. H., Li, W. J., Han, J. C., & Meng, S. H. (2008). A novel functionally graded material in the ZrB2–SiC and ZrO2 system by spark plasma sintering. Materials Science and Engineering: A, 498(1-2), 437-441. https://doi.org/10.1016/j.msea.2008.08.032
Kawasaki, A., & Watanabe, R. (1997). Concept and P/M fabrication of functionally gradient materials. Ceramics International, 23(1), 73-83. https://doi.org/10.1016/0272-8842(95)00143-3
Dermeik, B., & Travitzky, N. (2020). Laminated object manufacturing of ceramic‐based materials. Advanced engineering materials, 22(9), 2000256. https://doi.org/10.1002/adem.202000256
Gan, Y. X., Solomon, D., & Reinbolt, M. (2010). Friction stir processing of particle reinforced composite materials. Materials, 3(1), 329-350. https://doi.org/10.3390/ma3010329
Rathee, S., Maheshwari, S., & Siddiquee, A. N. (2018). Issues and strategies in composite fabrication via friction stir processing: a review. Materials and Manufacturing Processes, 33(3), 239-261. https://doi.org/10.1080/10426914.2017.1303162
Santhosh, V., Prakash, D. A., Murugan, K., & Babu, N. (2020). Thermo-mechanical analysis of Tailor-made functionally graded materials through Friction stir processing. Materials today: Proc., 33, 4445-4449. https://doi.org/10.1016/j.matpr.2020.07.687
Sam, M., Jojith, R., & Radhika, N. (2021). Progression in manufacturing of functionally graded materials and impact of thermal treatment—A critical review. Journal of Manufacturing Processes, 68, 1339-1377. https://doi.org/10.1016/j.jmapro.2021.06.062
Lin, X., Yue, T. M., Yang, H. O., & Huang, W. D. (2005). Laser rapid forming of SS316L/Rene88DT graded material. Materials Science and Engineering: A, 391(1-2), 325-336. https://doi.org/10.1016/j.msea.2004.08.072
Andertová, J., Tláskal, R., Maryška, M., & Havrda, J. (2007). Functional gradient alumina ceramic materials—Heat treatment of bodies prepared by slip casting method. Journal of the European Ceramic Society, 27(2-3), 1325-1331. https://doi.org/10.1016/j.jeurceramsoc.2006.04.088
Traini, T., Mangano, C., Sammons, R. L., Mangano, F., Macchi, A., & Piattelli, A. (2008). Direct laser metal sintering as a new approach to fabrication of an isoelastic functionally graded material for manufacture of porous titanium dental implants. Dental Materials, 24(11), 1525-1533. https://doi.org/10.1016/j.dental.2008.03.029
Mahmoud, E. R. I., Takahashi, M., Shibayanagi, T., & Ikeuchi, K. (2009). Effect of friction stir processing tool probe on fabrication of SiC particle reinforced composite on aluminium surface. Science and Technology of Welding and Joining, 14(5), 413-425. https://doi.org/10.1179/136217109X406974
Gandra, J., Miranda, R., Vilaça, P., Velhinho, A., & Teixeira, J. P. (2011). Functionally graded materials produced by friction stir processing. Journal of Materials Processing Technology, 211(11), 1659-1668. https://doi.org/10.1016/j.jmatprotec.2011.04.016
Sudarmadji, N., Tan, J. Y., Leong, K. F., Chua, C. K., & Loh, Y. T. (2011). Investigation of the mechanical properties and porosity relationships in selective laser-sintered polyhedral for functionally graded scaffolds. Acta Biomaterialia, 7(2), 530-537. https://doi.org/10.1016/j.actbio.2010.09.024
Wang, K., Sun, W., Li, B., Xue, H., & Liu, C. (2011). Microstructures in centrifugal casting of SiC p/AlSi9Mg composites with different mould rotation speeds. Journal of Wuhan University of Technology-Mater, 26, 504-509. https://doi.org/10.1007/s11595-011-0257-6
Mahamood, R. M., Akinlabi, E. T., Shukla, M., & Pityana, S. L. (2012). Functionally graded material: an overview.
CPM, S. A., Varghese, B., & Baby, A. (2014). A review on functionally graded materials. Int. J. Eng. Sci, 3, 90-101.
Rikhtegar, F., & Shabestari, S. G. (2014). Investigation on solidification conditions in functionally Si-gradient Al alloys using simulation and cooling curve analysis methods. Journal of Thermal Analysis and Calorimetry, 117, 721-729. https://doi.org/10.1007/s10973-014-3767-6
Bai, H., Chen, Y., Delattre, B., Tomsia, A. P., & Ritchie, R. O. (2015). Bioinspired large-scale aligned porous materials assembled with dual temperature gradients. Science advances, 1(11), e1500849. https://doi.org/10.1126/sciadv.1500849
Mahamood, R. M., & Akinlabi, E. T. (2015). Laser metal deposition of functionally graded Ti6Al4V/TiC. Materials & Design, 84, 402-410. https://doi.org/10.1016/j.matdes.2015.06.135
Tsukamoto, H. (2015). Microstructure and indentation properties of ZrO2/Ti functionally graded materials fabricated by spark plasma sintering. Materials Science and Engineering: A., 640, 338-349. https://doi.org/10.1016/j.msea.2015.06.005
Nie, T., Xue, L., Ge, M., Ma, H., & Zhang, J. (2016). Fabrication of poly (L-lactic acid) tissue engineering scaffolds with precisely controlled gradient structure. Materials Letters, 176, 25-28. https://doi.org/10.1016/j.matlet.2016.04.078
Moravcik, I., Cizek, J., Kovacova, Z., Nejezchlebova, J., Kitzmantel, M., Neubauer, E., ... & Dlouhy, I. (2017). Mechanical and microstructural characterization of powder metallurgy CoCrNi medium entropy alloy. Materials Science and Engineering: A., 701, 370-380. https://doi.org/10.1016/j.msea.2017.06.086
Naviroj, M., Voorhees, P. W., & Faber, K. T. (2017). Suspension-and solution-based freeze casting for porous ceramics. Journal of Materials Research, 32(17), 3372-3382. https://doi.org/10.1557/jmr.2017.133
Sharma, A., Bandari, V., Ito, K., Kohama, K., Ramji, M., & BV, H. S. (2017). A new process for design and manufacture of tailor-made functionally graded composites through friction stir additive manufacturing. Journal of Manufacturing Processes, 26, 122-130. https://doi.org/10.1016/j.jmapro.2017.02.007
Zygmuntowicz, J., Wiecińska, P., Miazga, A., Konopka, K., & Kaszuwara, W. (2017). Al 2 O 3/Ni functionally graded materials (FGM) obtained by centrifugal-slip casting method. Journal of Thermal Analysis and Calorimetry, 130, 123-130. https://doi.org/10.1007/s10973-017-6232-5
Omidi, N., Jabbari, A. H., & Sedighi, M. (2018). Mechanical and microstructural properties of titanium/hydroxyapatite functionally graded material fabricated by spark plasma sintering. Powder Metallurgy, 61(5), 417-427. https://doi.org/10.1080/00325899.2018.1535391
Owoputi, A. O., Inambao, F. L., & Ebhota, W. S. (2018). A review of functionally graded materials: fabrication processes and applications. International Journal of Applied Engineering Research, 13(23), 16141-16151.
Sarathchandra, D. T., Subbu, S. K., & Venkaiah, N. (2018). Functionally graded materials and processing techniques: An art of review. Materials today: Proc., 5(10), 21328-21334. https://doi.org/10.1016/j.matpr.2018.06.536
Khoo, W., Chung, S. M., Lim, S. C., Low, C. Y., Shapiro, J. M., & Koh, C. T. (2019). Fracture behavior of multilayer fibrous scaffolds featuring microstructural gradients. Materials & Design, 184, 108184. https://doi.org/10.1016/j.matdes.2019.108184
Odhiambo, J. G., Li, W., Zhao, Y., & Li, C. (2019). Porosity and its significance in plasma-sprayed coatings. Coatings, 9(7), 460. https://doi.org/10.3390/coatings9070460
Saleh, B., Jiang, J., Fathi, R., Al-Hababi, T., Xu, Q., Wang, L., ... & Ma, A. (2020). 30 Years of functionally graded materials: An overview of manufacturing methods, Applications and Future Challenges. Composites Part B: Engineering, 201, 108376.https://doi.org/10.1016/j.compositesb.2020.108376
Srinivas, P. N. S., & Balakrishna, B. (2020). Microstructural, mechanical and tribological characterization on the Al based functionally graded material fabricated powder metallurgy. Materials Research Express, 7(2), 026513. https://doi.org/10.1088/2053-1591/ab6f41
Xiong, Y. Z., Gao, R. N., Zhang, H., Dong, L. L., Li, J. T., & Li, X. (2020). Rationally designed functionally graded porous Ti6Al4V scaffolds with high strength and toughness built via selective laser melting for load-bearing orthopedic applications. Journal of the Mechanical Behavior of Biomedical Materials, 104, 103673. https://doi.org/10.1016/j.jmbbm.2020.103673
Yan, L., Chen, Y., & Liou, F. (2020). Additive manufacturing of functionally graded metallic materials using laser metal deposition. Additive Manufacturing, 31, 100901. https://doi.org/10.1016/j.addma.2019.100901
Reichardt, A., Shapiro, A. A., Otis, R., Dillon, R. P., Borgonia, J. P., McEnerney, B. W., ... & Beese, A. M. (2021). Advances in additive manufacturing of metal-based functionally graded materials. International Materials Reviews, 66(1), 1-29. https://doi.org/10.1080/09506608.2019.1709354
Singh, D. D., Arjula, S., & Reddy, A. R. (2021). Functionally graded materials manufactured by direct energy deposition: a review. Materials today: Proc., 47, 2450-2456. https://doi.org/10.1016/j.matpr.2021.04.536
Goudarzi, Z. M., Valefi, Z., Zamani, P., & Taghi-Ramezani, S. (2022). Comparative investigation of the effect of composition and porosity gradient on thermo-mechanical properties of functionally graded thick thermal barrier coatings deposited by atmospheric plasma spraying. Ceramics International, 48(19), 28800-28814. https://doi.org/10.1016/j.ceramint.2021.12.307
Kashkarov, E. B., Krotkevich, D. G., Mingazova, Y. R., Pushilina, N. S., Syrtanov, M. S., Lider, A. M., & Travitzky, N. (2022). Functionally graded laminated composites fabricated from MAX-phase filled preceramic papers: microstructure, mechanical properties and oxidation resistance. Journal of the European Ceramic Society, 42(5), 2062-2072. https://doi.org/10.1016/j.jeurceramsoc.2022.01.023
Pasha, A., & Rajaprakash, B. M. (2022). Functionally graded materials (FGM) fabrication and its potential challenges & applications. Materials Today: Proceedings, 52, 413-418. https://doi.org/10.1016/j.matpr.2021.09.077

Details

Primary Language

English

Subjects

Composite and Hybrid Materials

Journal Section

Research Article

Authors

Burak İkinci ^*
0009-0006-9866-9096
Türkiye

Publication Date

February 28, 2025

Submission Date

December 11, 2024

Acceptance Date

January 17, 2025

Published in Issue

Year 2025 Volume: 1 Number: 1

IZ

https://izlik.org/JA55US98ZE

Cite

RIS / Bibtex

APA

İkinci, B. (2025). Manufacturing methods of functionally graded materials: a comprehensive review. Journal of Ceramics and Composites, 1(1), 6-20. https://izlik.org/JA55US98ZE

AMA

1.İkinci B. Manufacturing methods of functionally graded materials: a comprehensive review. jcc. 2025;1(1):6-20. https://izlik.org/JA55US98ZE

Chicago

İkinci, Burak. 2025. “Manufacturing Methods of Functionally Graded Materials: A Comprehensive Review”. Journal of Ceramics and Composites 1 (1): 6-20. https://izlik.org/JA55US98ZE.

EndNote

İkinci B (February 1, 2025) Manufacturing methods of functionally graded materials: a comprehensive review. Journal of Ceramics and Composites 1 1 6–20.

IEEE

[1]B. İkinci, “Manufacturing methods of functionally graded materials: a comprehensive review”, jcc, vol. 1, no. 1, pp. 6–20, Feb. 2025, [Online]. Available: https://izlik.org/JA55US98ZE

ISNAD

İkinci, Burak. “Manufacturing Methods of Functionally Graded Materials: A Comprehensive Review”. Journal of Ceramics and Composites 1/1 (February 1, 2025): 6-20. https://izlik.org/JA55US98ZE.

JAMA

1.İkinci B. Manufacturing methods of functionally graded materials: a comprehensive review. jcc. 2025;1:6–20.

MLA

İkinci, Burak. “Manufacturing Methods of Functionally Graded Materials: A Comprehensive Review”. Journal of Ceramics and Composites, vol. 1, no. 1, Feb. 2025, pp. 6-20, https://izlik.org/JA55US98ZE.

Vancouver

1.Burak İkinci. Manufacturing methods of functionally graded materials: a comprehensive review. jcc [Internet]. 2025 Feb. 1;1(1):6-20. Available from: https://izlik.org/JA55US98ZE