Experimental and Numerical Investigation of Photovoltaic Systems Cooling with Binary Mixture Spray

Yıl 2024, Cilt: 1 Sayı: 1, 1 - 9, 01.07.2024

Furkan Ege Kenan Yakut

https://doi.org/10.5281/zenodo.12567209

Öz

In this study, it is aimed to achieve more effective and faster cooling by using a binary mixture (water-ethanol) in spray cooling in order to increase the efficiency of photovoltaic systems. The panel cell temperature efficient working range of photovoltaic systems can be defined as 25 °C – 45 °C. In this experimental study, when the panel cell temperature exceeds 45 °C at 1000 W/m2 radiation, spray cooling was performed until it was reduced to 25 °C. In the cooling process, faster cooling was achieved by using 15%, 30% and 45% ethanol in the binary mixture. DXD-HSİ-6 nozzle was used at different liquid and air flow rates in the spray cooling experiment setup and ALR (air-liquid ratio) was calculated. At the same time, CFD analysis of the cooling process was performed with the help of ANSYS-Fluent software and compared with the experimental results. In the spray cooling process of the photovoltaic system with binary mixture, the effect of ethanol on cooling was investigated in all experiments. The fastest cooling was achieved at a liquid flow rate of 800 ml/min and an air flow of 4.5 m3 /h. In the cooling process with pure water, it has been observed that the panel cell temperature can be reduced below 25 °C by applying a 100-second spray, and when 45% ethanol is added, the time is reduced to 75 seconds by cooling 25% faster.

Anahtar Kelimeler

Spray cooling, atomization, Photovoltaic system, binary mixture, ethanol

Proje Numarası

Atatürk University 2021-9594

Kaynakça

• Anonymous, 2018. Yenilenebilir enerjinin dalları ve açıklaması, https://yenilenebilirenerjisistemi.blogspot.com/2018/02/enerjisi-yenilenebilir enerjikaynaklar.html (20.05.2020)
• Akman, Ö. (2019). Fotovoltaik Panellerde Sıcaklığın Elektriksel Verime Etkileri ve Termal Güç Eldesi. [Yüksek Lisans Tezi, Karabük Üniversitesi, Fen Bilimleri Enstitüsü, Karabük].
• Özgeçmen, A. (2007). Güneş Pilleri Kullanarak Elektrik Üretimi, [Yüksek Lisans Tezi, Gazi Üniversitesi Fen Bilimleri Enstitüsü, 112s, Ankara].
• Huang, S., Lin, T., Hung, W., & Sun, F. (2001). Performance Evaluation Of Solar Photovoltaic/Thermal Systems, Solar Energy, 70 (5), 443-448.
• Diwania, S., Agrawal, S., Siddiqui, A., S. & Singh, S. (2020). Photovoltaic–thermal (PV/T) technology: a comprehensive review on applications and its advancement. International Journal of Energy and Environmental Engineering, (11), 33–54.
• Anonymous, (2020). Performance of Photovoltaic Thermal Collector (PV/T) with Diffrent Absorbers Design. http://www.wseas.us/elibrary/transactions/ environment/2009/31- 968.pdf.
• Jafari, M. (2014). Analysis of heat transfer in spray cooling system using simulations. [MS Thesis, Mechanical, Automotive and Materials Engineering, University of Windsor, Canada].
• Liu, H., Cai, C., Jia, M., Gao, J., Yin, H., & Chen, H. (2019). Experimental investigation on spray cooling with low-alcohol additives. Applied Thermal Engineering, 146, 921-930.
• Xu, H., Wang, J., Li, B., Yu, K., Tian, J., Wang, D., & Zhang, W. (2021). Effect of spray modes on electrospray cooling heat transfer of ethanol. Applied Thermal Engineering, 189, 116757.
• Yan, L., & Kim, I. H. (2011). Effect of dietary grape pomace fermented by Saccharomyces boulardii on the growth performance, nutrient digestibility and meat quality in finishing pigs. Asian-Australasian Journal of Animal Sciences, 24(12), 1763-1770.
• Gao, X., & Li, R. (2017). Effects of nozzle positioning on single-phase spray cooling. International Journal of Heat and Mass Transfer, 115, 1247-1257.
• Bao, J., Wang, Y., Xu, X., Niu, X., Liu, J., & Qiu, L. (2019). Analysis on the influences of atomization characteristics on heat transfer characteristics of spray cooling. Sustainable Cities and Society, 51, 101799.
• Nateqi, M., Rajabi Zargarabadi, M., & Rafee, R. (2021). Experimental investigations of spray flow rate and angle in enhancing the performance of PV panels by steady and pulsating water spray system. SN Applied Sciences, 3, 1-13.
• Santiko Wibowo, Z. A., Rachmanto, R. A., Himawanto, D. A., & Prasetyo, S. D. (2024). Optimization of Photovoltaic Performance Using a Water Spray Cooling System with Different Nozzle Types. International Journal of Computational Methods and Experimental Measurements 12(1), 9-19.
• Kim, J. (2007). Spray cooling heat transfer: The state of the art. International Journal of Heat and Fluid Flow, 28(4), 753-767.
• Bhatt, N. H., Raj, R., Varshney, P., Pati, A. R., Chouhan, D., Kumar, A., ... & Mohapatra, S. S. (2017). Enhancement of heat transfer rate of high mass flux spray cooling by ethanol-water and ethanol-tween20-water solution at very high initial surface temperature. International Journal of Heat and Mass Transfer, 110, 330-347.
• Yesildal, F., Ozakin, A. N., & Yakut, K. (2022). Optimization of operational parameters for a photovoltaic panel cooled by spray cooling. Engineering Science and Technology, an International Journal, 25, 100983.
• Akpınar, E. (2005). Deneysel çalışmalardaki hata analizinde bir örnek: Kurutma deneylerindeki hata analizi. Mühendis ve Makina, 46(540), 41-48.
• Holman, J. (2012). Experimental methods for engineers, 5th edition. McGraw-Hill, 739, New York, USA