BUILDING ENERGY MODELLING REVIEW

Abstract

In with parallel to the population growth, the increasing for energy throughout the world causes increase in environmental health problems at the end of energy use have made it necessary to use energy more effectively and efficiently. Reasercher show that most of the energy consumption is caused by buildings. The increase in the buildings with each days causes to Investigate the In energy consumption at the same rate. Due to the continuous increase in energy consumption, the global warming and health problems that have become threatening to humanityled to the emergence of the sustainable Building. Sustainable buildings are environmentally friendly structures designed to use energy resources in the most efficient way. In this Review, more effective and environmentally friendly building energy models have become an attractive topic and common in both research and industrial society in recent years. In this study, which aims to evaluate sustainable building in terms of energy efficiency and to determine the criteria that should be found in green building applications; Energy efficiency and Eco- Environment building concepts have been mentioned and a general review has been made on methods of building information modeling (BIM) utilized in building design process for building energy modeling (BEM) process. Finally, explanatory information about a sample energy analysis simulation study to be carried out including use the Design Builder and Energy Plus programs is included.

Keywords

• Sustainable Buildings
• Energy Efficiency
• Information Modeling (BIM)
• Building Energy Modeling (BEM)

References

1. [1]Kelso JD. (2012). Buildings energy data book. Department of Energy.
2. [2] Al-Homoud M.S. (2001). Computer-aided building energy analysis techniques. Build Environ, 36(4):421–33.
3. [3] Gao, H., Koch, C., & Wu, Y. (2019). Building information modelling based building energy modelling: A review. Applied energy, 238, 320-343.
4. [4] Ernstrom B, Hanson D, Hill D, Clark J, Holder M, Turner D, Sundt D, Barton L, Barton T. (2006). The contractors' guide to BIM. Associated General Contractors of America.
5. [5] Yonar O. (2009). Green Building, http://www.yesilbina.com, cited: 09.11.2009.
6. [6] World Energy Council. (2008). “Energy Efficiency Policies Around The World Review And Evaluation”, http://www.worldenergy.org/wpcontent/uploads/2012/10/PUB_Energy_Efficiency_Policies_Around_the_World_Review_and_Evaluation_2008_WEC.pdf, cited: 09.10.2014.
7. [7] Olgun, B., O. Kurtuluş, S. Gültek, H.A., & Heperkan. (2009). “Energy Efficiency in Turkey and Legislation”, IX. National Plumbing Engineering Congress, 6-9.
8. [8] TEVEM & ENVERDER (2010). “Turkey's Energy and Energy Efficiency Report: “Transition to Green Economy”, July - 2010, Energy Efficiency Association (ENVERDER), Turkey Energy Efficiency Council (TEVEM), Iconomy Vezir Consultancy, 33.

9. [9] Allen, M.R., O.P. Dube, W. Solecki, F. Aragón-Durand, W. Cramer, S. Humphreys, M. Kainuma, J. Kala, N. Mahowald, Y. Mulugetta, R. Perez, M. Wairiu, & K. Zickfeld (2018). Framing and Context. V. Masson-Delmotte vd. (Ed), Global Warming of 1.5°C, IPCC, https://www.ipcc.ch/site/assets/uploads/sites/2/2019/05/SR15_Citation.pdf, cited: 11.01.2020.
10. [10] Miller, C.A., Iles, A., & Jones, C.F. (2013). “The social dimensions of energy transitions”, Science as Culture, 22(2), 135-148.
11. [11] Sovacool, B.K. (20145). “What are we doing here? Analyzing fifteen years of energy scholarship and proposing a social science research agenda”, Energy Research & Social Science, 1, 1-29.
12. [12] Sivri, N., Sarıtürk, B., & Şeker, Z., (2015). “My geomatics engineers in determining the relationship between living standards and carbon footprint in Turkey “, Turkish Scientific and Technical Conference, 25-28 March 2015, Chamber of Survey and Cadastre Engineers, Ankara.
13. [13] Koçer, A., Yaka, F., & Güngör, A., (2015). “Determination of the carbon footprint of Akdeniz University Health Services Vocational School”, Electronic Journal of Machine Technologies, 12: 37-45.
14. [14] Rahbauer, S., Menapace, L., Menrad, K., & Decker, T. (2016). “Adoption of Green Electricity by Small and Medium Sized Enterprises in Germany”, Renewable and Sustainable Energy Reviews, 59(1), 1185-1194.
15. [15] Petrova, M. (2010). Determinants of Public Opinion on Renewable Energy: The Case of Wave Energy Development in Oregon. (Doctor of Philosophy), Oregon State University, Oregon.
16. [16] Krygiel, E., & Nies, B. (2008). Green BIM- Successful Sustainable Design with Building Information Modelling, Wiley Publishing, Indianapolis, Indiana.
17. [17] Magent, S., (2005). A Process and Competency-Based Approach to High Performance Building Design, PhD Thesis, University of Pennsylvania, Faculty of Architecture, Pensilvanya.
18. [18] Sarıer, N., Özay, S., & Özkılıç, Y. (2012). Sustainable Green Buildings, Istanbul Kültür University, Civil Engineering Department.
19. [19] Ding, G.K.C. (2008). Sustainable Construction: The Role of Environmental Assessment Tools, Journal of Environmental Management, 86, 451-464.
20. [20] Sur, H., (2015). “My geomatics engineers in determining the relationship between living standards and carbon footprint in Turkey”, Turkish Scientific and Technical Conference, 25-28 March 2015, Ankara Chamber of Survey and Cadastre Engineers, İstanbul.
21. [21] Yılmaz Z. (2006). Smart Buildings and Renewable Energy, Plumbing Engineering Journal, 91: 7-15.
22. [22] Terekli, G., Özkan, O., & Bayın, G. (2013). Eco-Friendly Hospitals: From Hospital to Green Hospital, Ankara Health Services Magazine, 12 (2), 38.
23. [23] Öztürk, A. (2015). Analysis of Green Building Certification Systems, Master Thesis, Istanbul Technical University Energy Institute, Istanbul, 33.
24. [24] Integrated whole building design guidelines. Available from: http://www.mfe. govt.nz/sites/default/files/integrated-building-guidelines.pdf , cited 06.05.2017.
25. [25] Bragança L, Vieira SM, & Andrade JB. (2004). Early stage design decisions: the way to achieve sustainable buildings at lower costs. Sci World J.
26. [26] Larsson N. (2009). The integrated design process; history and analysis. International Initiative for a Sustainable Built Environment.
27. [27] Zimmerman A., & Eng P. (2006). Integrated design process guide. Ottawa: Canada Mortgage and Housing Corporation.
28. [28] Filzmoser M, Kovacic I, & Vasilescu D-C. (2016). Development of BIM-supported integrated design processes for teaching and practice. Eng Proj Org J, 6(2–4):129–41. [29] Eastman C, Fisher D, Lafue G, Lividini J, Stoker D, & Yessios C. (1974). An outline of the building description system. Res Rep, 50.
29. [30] Fernandez D. (2015). National BIM standard – United States, Available from: https://www.nationalbimstandard.org, cited: 16.05.2017.
30. [31] Wong JKW, & Zhou J. (2015). Enhancing environmental sustainability over building life cycles through green BIM: a review. Autom Constr, 57:156–65.
31. [32] Azhar S. (2011). Building information modeling (BIM): trends, benefits, risks, and challenges for the AEC industry. Leadersh Manage Eng, 11(3):241–52.
32. [33] Roadmap for the integrated design process. Available from: http://www. greenspacencr.org/events/IDProadmap.pdf, cited: 09.03.2017.
33. [34] Guide B. (2015) Energy performance. Unites States General Services Administration (GSA).
34. [35] Maile T, Fischer M, & Bazjanac V. (2007). Building energy performance simulation tools-a life-cycle and interoperable perspective. Center for Integrated Facility Engineering (CIFE) Working Paper, vol. 107:1–49.
35. [36] Crawley DB, Hand JW, Kummert M, & Griffith BT. (2008). Contrasting the capabilities of building energy performance simulation programs. Build Environ, 43(4):661–73.
36. [37] Maile T, Fischer M, Haymaker J, & Bazjanac V. (2010). Formalizing approximations, assumptions, and simplifications to document limitations in building energy performance simulation. CIFE WP126 Stanford University.
37. [38] Bahar YN, Pere C, Landrieu J, & Nicolle C. (2013). A thermal simulation tool for building and its interoperability through the building information modeling (BIM) platform. Buildings, 3(2):380–98.
38. [39] Menezes AC, Cripps A, Bouchlaghem D, & Buswell R. (2012). Predicted vs. actual energy performance of non-domestic buildings: using post-occupancy evaluation data to reduce the performance gap. Appl Energy, 97:355–64.
39. [40] Buonomano A, & Palombo A. (2014). Building energy performance analysis by an in-house developed dynamic simulation code: an investigation for different case studies. Appl Energy, 113:788–807.
40. [41] Lü X, Lu T, Kibert CJ, & Viljanen M. (2014). A novel dynamic modeling approach for predicting building energy performance. Appl Energy, 114:91–103.
41. [42] Wang L, Lee EW, & Yuen RK. (2018). Novel dynamic forecasting model for building cooling loads combining an artificial neural network and an ensemble approach. Appl Energy, 228:1740–53.
42. [43] Dong B, Lam K, Huang Y, & Dobbs G. (2007). A comparative study of the IFC and gbXML informational infrastructures for data exchange in computational design support environments. Tenth international IBPSA conference.
43. [44] Crawley DB, Lawrie LK, Winkelmann FC, Buhl WF, Huang YJ, & Pedersen CO. (2001). EnergyPlus: creating a new-generation building energy simulation program. Energy Build, 33(4):319–31.
44. [45] Bazjanac V, & Crawley DB. (1997). The implementation of industry foundation classes in simulation tools for the building industry. Lawrence Berkeley National Laboratory.
45. [46] Lam K, Karaguzel O, Zhang R, & Zhao J. (2012). Identification and analysis of interoperability gaps between Nbims/Open standards and building performance simulation tools. Pittsburgh: Center for Building Performance and Diagnostics, Carnegie Mellon University.
46. [47] Gourlis G, Kovacic I. (2017). Building Information Modelling for analysis of energy efficient industrial buildings–a case study. Renew Sustain Energy Rev, 68:953–63.
47. [48] Tunali, S. (2012). In the building design of energy simulation methods using as a support system. Master Thesis, Istanbul Technical University, Institute of Science.
48. [49] Hong, T., Chou, S.K. ve Bong, T.Y. (2000). Building Simulation: An overview of developments and Information Sources, Building and Environment, 35:4, 347-361.
49. [50] Kayın, Ö. (2019). Energy modeling in buildings, energy performance analysis and evaluation of renewable energy use within the scope of environmentally friendly green building application example. Master Thesis, Tekirdağ Namık Kemal Üniversitesi, Institute of Science.
50. [51] URL: https://graphisoft.com/solutions/products/archicad, cited: 27.02.2021.
51. [52] URL: https://gbs.autodesk.com/GBS, cited: 27.02.2021.
52. [53] URL: https://www.openstudio.net, cited: 27.02.2021.
53. [54] Jokela, M., Keinanen, A., Lahtela, H., & Lassila, K. (1997). Integrated building simulation tool RIUSKA. http://www.ibpsa.org/proceedings/bs1997/bs97_p115.pdf, cited: 27.02.2021.
54. [55] URL: https://www.trane.com/commercial/ north-america/ us/en/ products-systems/design-and-analysis-tools/trace-700.html, cited: 27.02.2021.
55. [56] URL: https://energy-models.com/training/ trace-700/introduction, cited: 27.02.2021.
56. [57] Harputlugil, G.U. (2014). Building energy performance assessment tools-energy simulation. Plumbing Engineering - Issue 144 - November / December.
57. [58] Cormier A, Robert S, Roger P, Stephan L, & Wurtz E. (2011). Towards a BIM-based service oriented platform: application to building energy performance simulation. Proceedings of the 12th conference of international building performance simulation association, Sydney, Australia.
58. [59] Ramaji IJ, Messner JI, & Leicht RM. (2016). Leveraging building information models in IFC to perform energy analysis in OpenStudio. Proc SimBuild, 6(1).
59. [60] Kim I, Kim J, & Seo J. (2012). Development of an IFC-based IDF converter for supporting energy performance assessment in the early design phase. J Asian Archit Build Eng., 11(2):313–20.
60. [61] Kim K, & Yu J. (2016). BIM-based building energy load calculation system for designers. KSCE J Civ Eng., 20(2):549–63.
61. [62] Bazjanac V, & Maile T. (2004). IFC HVAC interface to EnergyPlus-a case of expanded interoperability for energy simulation. Lawrence Berkeley National Laboratory.
62. [63] O’Sullivan B, & Keane M. (2005). Specification of an IFC based intelligent graphical user interface to support building energy simulation. Proceedings of the ninth international building performance simulation association conference, Montreal.
63. [64] Pinheiro S, O’Donnell J, Wimmer R, Bazjanac V, Muhic S, Maile T, Frisch J, & van Treeck C. (2016). Model view definition for advanced building energy performance simulation. CESBP/BauSIM Conference.
64. [65] Garcia EG, & Zhu Z. (2015). Interoperability from building design to building energy modeling. J Build Eng., 1:33–41.
65. [66] Che L, Gao Z, Chen D, & Nguyen TH. (2010). Using building information modeling for measuring the efficiency of building energy performance. Proceedings of the international conference on computing in civil and building engineering (ICCCBE).
66. [67] Rahmani Asl M, Zarrinmehr S, & Yan W. (2013). Towards BIM-based parametric building energy performance optimization.
67. [68] Ali S. (2010). Analysis of procedures and workflow for conducting energy analysis using Autodesk Revit, gbXML and Trace 700. IBPSA-USA J, 4(1):56–63.
68. [69] Dimitriou V, Firth SK, Hassan TM, & Fouchal F. (2016). BIM enabled building energy modelling: development and verification of a GBXML to IDF conversion method.
69. [70] Kamel E, & Memari AM. (2018). Automated building energy modeling and assessment tool (ABEMAT). Energy, 147:15–24.
70. [71] Amor R, Jalaei F, & Jrade A, (2014). Integrating Building Information Modeling (BIM) and energy analysis tools with green building certification system to conceptually design sustainable buildings.