Investigation of effects of MoEpPOSS nanoparticle on the morphological and rheological properties of PA6/TPE blends

Yıl 2024, Cilt: 4 Sayı: 2, 289 - 297

Rumeysa Yıldırım Hürol Koçoğlu Merve Ün Muhammad Saeed Ullah İpek Yakar Guralp Ozkoc Olcay Mert Mehmet Kodal

https://doi.org/10.61112/jiens.1405425

Öz

Polyamide 6 (PA6) is one of the used engineering thermoplastics with the advantages of high resistance to chemicals and abrasion, high fatigue resistance and toughness. However, it has some disadvantages such as low impact strength and notch sensitivity. The blend of PA6 with elastomers can mitigate these shortcomings. Lately, thermoplastic elastomers (TPE) have been frequently used to toughen notch-sensitive polymers such as PA6 due to their outstanding properties such as high elasticity, recyclability, and easy processing. As it is known, obtaining superior properties in polymer blends relies on the interfacial interaction between the components of the blend. Additionally, by using compatibilizers, blends with the required properties can be created by enhancing interaction between phases, or interfacial adhesion. Recently, polyhedral oligomeric silsesquioxane (POSS) nanoparticles, organic/inorganic hybrid nanoparticles, are preferred as an alternative compatibilizer to conventional types. In this study, PA6/TPE blends were compatibilized with POSS nanoparticle with single epoxy group (MoEpPOSS). The morphological and rheological properties of PA6/TPE blends compatibilized with MoEpPOSS nanoparticle were investigated. Also, possible chemical interactions between PA6 and/or TPE and MoEpPOSS nanoparticle were determined via Fourier transform infrared spectroscopy (FTIR) analyses.

Anahtar Kelimeler

PA6, TPE, POSS, Rheological Properties, Morphological properties

Destekleyen Kurum

The Scientific and Technological Research Council of Turkey (TUBITAK)

Proje Numarası

120M718

Teşekkür

This study was granted by The Scientific and Technological Research Council of Turkey (TUBITAK) (Project No: 120M718).

MoEpPOSS nanotaneciğinin PA6/TPE karışımlarının morfolojik ve reolojik özelliklerine etkisinin incelenmesi

Öz

Poliamit 6 (PA6) kimyasallara, yorulmaya ve aşınmaya karşı yüksek direnç ve yüksek tokluk gibi sahip avantajlara sahip bir mühendislik termoplastiğidir. Fakat çentik hassasiyeti ve düşük darbe direnci gibi dezavantajlara sahiptir. Bu tür istenmeyen özelliklerini bertaraf etmek için elastomerlerle karışımları hazırlanmaktadır. Son zamanlarda, yüksek elastikiyet, geri dönüştürülebilirlik ve kolay işlenebilirlik gibi üstün özelliklerinden dolayı termoplastik elastomer (TPE)'ler, PA6 gibi çentik hassasiyeti olan polimerlerin toklaştırılmasında sıklıkla kullanılmaktadır. Bilindiği üzere, polimer karışımlarında istenilen özelliklerin elde edilebilmesi karışımı oluşturan bileşenler arasındaki arayüzey etkileşimine bağlıdır. Uyumlaştırıcılar kullanılarak bu arayüzey etkileşimi elde edilebilmektedir. Son zamanlarda, polihedral oligomerik silseskuiokzan (POSS) organik/inorganik hibrit nanotanecikleri konvansiyonel olanlara göre alternatif bir uyumlaştırıcı olarak kullanılmaktadırlar. Bu çalışmada, PA6/TPE karşımlarının uyumlaştırılmasında tekli epoksi grubuna sahip POSS nanotanecikleri (MoEpPOSS) kullanılmıştır. MoEpPOSS ile uyumlaştırılmış PA6/TPE karışımlarının morfolojik ve reolojik özellikleri incelenmiştir.

Anahtar Kelimeler

PA6, TPE, POSS, Reolojik özellikler, Morfolojik özellikler

Proje Numarası

120M718

Kaynakça

• Liu, X. Q., Yang, W., Xie, B. H., Yang, M. B (2012) Influence of multiwall carbon nanotubes on the morphology, melting, crystallization and mechanical properties of polyamide 6/acrylonitrile–butadiene–styrene blends. Materials and Design 34:355–362. https://doi.org/10.1016/j.matdes.2011.08.028
• Chow, W. S., Mohd Ishak, Z. A (2015) Polyamide blend-based nanocomposites: A review. Express Polym. Lett 9:211–232. https://doi.org/10.3144/expresspolymlett.2015.22
• Naderi, G., Razavi-Nouri, M., Taghizadeh, E., Lafleur, P. G., Dubois, C (2011) Preparation of thermoplastic elastomer nanocomposites based on polyamide-6/polyepichlorohydrin-co-ethylene oxide. Polym. Eng. Sci 51:278–284. https://doi.org/10.1002/pen.21824
• Lu, M., Keskkula, H., Paul, D. R (1995) Toughening of nylon 6 with grafted rubber impact modifiers. J. Appl. Polym. Sci 58:1175–1188. https://doi.org/10.1002/app.1995.070580711
• Van Duin, M., Borggreve, R. J. M (1997) Blends of polyamides and maleic-anhydride-containing polymers: interfacial chemistry and properties. In: Al-Malaika, S (ed) Reactive Modifiers for Polymers, Blackie Academic and Professional, ss 133–162
• Yu, H., Zhang, Y., Ren, W (2009) Toughening effect of ethylene‐vinyl acetate rubber on nylon 1010 compatibilized by maleated ethylene‐vinyl acetate copolymers. J. Polym. Sci., Part B: Polym. Phys 47(4), 434-444. https://doi.org/10.1002/polb.21648
• Xu, M., Qiu, W., Qiu, G (2013) Ethylene-propylene elastomer grafted maleic anhydride toughened Polyamide-6 morphology and properties. J. Macromol. Sci., Part B: Phys 52(1), 155-166. https://doi.org/10.1080/00222348.2012.695644
• Zhang, W., Fu, B. X., Seo, Y., Schrag, E., Hsiao, B., Mather, P. T., Yang, N. L., Xu, D., Ade, H., Rafailovich, M., Sokolov, J (2002) Effect of Methyl Methacrylate/Polyhedral Oligomeric Silsesquioxane Random Copolymers in Compatibilization of Polystyrene and Poly(methyl methacrylate) Blends. Macromolecules 35:8029–8038. https://doi.org/10.1021/MA020725I
• Yıldırım, R., Ullah, S.M., Koçoğlu, H., Ün, M., Çakır, N.Y., Demir, G., Çetin, D., Urtekin, G., Özkoç, G., Mert, Kodal, M. (2023) Effects of Hybrid POSS Nanoparticles on the Properties of Thermoplastic Elastomer-Toughened Polyamide 6. ACS Omega 8: 47034−47050. https://doi.org/10.1021/acsomega.3c06896
• Sundararaj, U., Macosko, C. W., Rolando, R. J., Chan, H. T (1992) Morphology development in polymer blends. Polym. Eng. Sci 32:1814-1823. https://doi.org/10.1002/pen.760322404
• Huang, H. X., Huang, Y. F., Li, X. J (2007) Detecting blend morphology development during melt blending along an extruder. Polym. Test 26:770-778. https://doi.org/10.1016/j.polymertesting.2007.04.004
• Kodal, M (2016) Polypropylene/polyamide 6/POSS ternary nanocomposites: Effects of POSS nanoparticles on the compatibility. Polymer 105:43–50. https://doi.org/10.1016/j.polymer.2016.10.021
• Li, S., Simon, G. P., Matisons, J. G (2010) The effect of incorporation of POSS units on polymer blend compatibility. J. Appl. Polym. Sci 115:1153–1159. https://doi.org/10.1002/app.31225
• Kilic, N. T., Can, B. N., Kodal, M., Ozkoc, G (2019) Compatibilization of PLA/PBAT blends by using Epoxy-POSS. J. Appl. Polym. Sci 136: 47217. https://doi.org/10.1002/app.47217
• Dealy, J. M., Wissbrun, K. F. (1999) Melt Rheology and Its Role in Plastics Processing. In: Melt Rheology and Its Role in Plastics Processing, Springer.