Investigation on The effect of Airgap Distance for Ignition Coils Using Finite Element Methods

Year 2016, Volume: 5 , 18 - 25, 07.11.2016

Ugur Demir Mustafa Caner Akuner

https://izlik.org/JA35MH88KZ

Abstract

Abstract – This study is related to the ignition coil which produces spark energy to ignite fuel mixture in cylinder of internal combustion motor. There are some problems that is commonly seen in automotive ignition coil. These problems lead to break down the spark plug by producing of low energy or high energy output.  The mentioned output energy has 3 conditions which are low energy output, high energy output and optimal energy output. High voltage output leads to dry to airgap of spark plug. On the other hand, low voltage output leads to wet to airgap of spark plug. The purpose of this study is investigation on the ignition coil to be able to produce the best output which is optimal energy.  To achive optimal energy output, an ignition coil model was designed in Ansys Maxwell environment. An ignition coil contains basically  primary winding, secondary winding, core and resin for insulating. Optimal energy output is targeted by changing the airgap distance on the core of ignition coil. An experiment table was created to provide the optimization for output energy of ignition coil. This experiment table consists of different airgap distances of core on ignition coil. All combinations in the experiment table was simulated on the model of ignition coil by using finite element analysis. Finally, all simulation results from experiment table were evaluated aspect of relationship between airgap distance for core of ignition coil and output energy of ignition coil.

Keywords

Ignition Systems , Finite Element Method , Automotive Ignition Coils.

References

• References
• Rohwein,G.J., "An Efficient, Power-Enhanced Ignition System", IEEE TRANSACTIONS ON PLASMA SCIENCE, VOL. 25, NO. 2, APRIL 1997
• Poggiani, C., Battistonia, M., Grimaldia, C.N., Magherinib, A., “Experimental Characterization of a Multiple Spark Ignition System”, 70th Conference of the ATI Engineering Association, 79-85, 2015
• Lim,O., Hung,N.B., Oh,S, Kim,G., Song,H., Iida,N., "A study of operating parameters on the linear spark ignition engine", Applied Energy 160, 746-760, 2015
• Zhong,S., Miao,N., Yu,Q., Cao,W.,"Energy measurement of spark discharge using different triggering methods and inductance loads", Journal of Electrostatics 73, 97-102, 2015
• WANG,Q., ZHENG,Y., YU,J., JIA,J.,"Circuit model and parasitic parameter extraction of the spark plug in the ignition system", Turk J Elec Eng & Comp Sci, Vol.20, No.5, 2012
• Qisong,W., Yongping,Z., Song,L., Zhiwei,Z., "Research on Energy Simulation Model for Vehicle Ignition System", IEEE Vehicle Power and Propulsion Conference (VPPC), September 3-5, 2008
• Ning,C., Yun,Z., "Analysis of Ignition Energy Efficiency for Automotive Ignition Coils”, IEEE - Power and Energy Engineering Conference (APPEEC), 2010 Asia-Pacific
• http://www.unuvar.com/UE-00Default/UE-00-2.html, 14 Ocak 2016
• Kazuhide,K., US20160211072A1, 2016