In this study, polylactic acid (PLA)-based nanocomposite membranes were prepared and used for the purification of simulated oil/water based wastewater. The lubricant oil (lubricating oil) was chosen as model oil. In order to increase the hydrophilicity of the membrane and improve its filtration performance, 0-20 wt.% of Halloysite nanotubes (HNT) were added into the PLA matrix. The effects of the HNT ratio on the oil/water swelling ratios (adsorption ratio), water flux, and oil rejection were determined. According to the results, optimal flux-oil rejection results were obtained with 5 wt.% of HNT incorporated nanocomposite membranes. The highest oil rejection of 94.9% was obtained using 5 wt.% of HNT incorporated membrane with a flux value of 1542.9 LMH.
Nanocomposite membrane polylactic acid membrane halloysite nanotube oil- water separation lubricating oil
Çanakkale Onsekiz Mart
FBA-2021-3598
This research is financially supported by The Scientific Research Coordination Unit of Çanakkale Onsekiz Mart University (Grant Number: FBA-2021-3598).
FBA-2021-3598
Birincil Dil | İngilizce |
---|---|
Konular | Kimya Mühendisliği |
Bölüm | Makaleler |
Yazarlar | |
Proje Numarası | FBA-2021-3598 |
Yayımlanma Tarihi | 30 Kasım 2022 |
Gönderilme Tarihi | 21 Nisan 2022 |
Kabul Tarihi | 18 Temmuz 2022 |
Yayımlandığı Sayı | Yıl 2022 Cilt: 5 Sayı: 2 |
This piece of scholarly information is licensed under Creative Commons Atıf-GayriTicari-AynıLisanslaPaylaş 4.0 Uluslararası Lisansı.
J. Turk. Chem. Soc., Sect. B: Chem. Eng. (JOTCSB)