Investigation of the alloying elements effect in the flux-cored wire and submerged arc welding flux combination

Yıl 2024, Sayı: 057, 153 - 168, 30.06.2024

Erhan Özkan

https://doi.org/10.59313/jsr-a.1463884

Öz

In this study, it was aimed to investigate hardfacing weld metals’ metallurgical and mechanical properties produced by flux-cored wire and submerged arc welding flux combinations. The usage of the combination for these two methods, which are generally preferred separately, distinguishes this research from other similar studies. In the first stage, the optimum production conditions and physical properties of the submerged arc welding fluxes were determined and then flux-cored wire manufacturing details have been defined. Agglomerated submerged arc welding fluxes and seamed type flux-cored welding wires samples were investigated according to the changing carbon, chromium, niobium, and wolfram ratios, while manganese and silicon values were kept constant. Five different samples have been prepared with this purpose, and the hardness test, wear test, microstructure analysis, chemical analysis, and X-Ray diffraction analysis were carried out respectively. It was observed that the increase in hardness affects the wear resistance directly. The effect of chemical analyses on the microstructure has also been determined. Moreover, while the increasing amount of chromium carbide clearly changed the microstructure, and the addition of refractory metals enabled the formation of the eutectic and dendritic structure. The problems of low efficiency in flux-cored wire and inability to alloy in submerged arc welding flux were solved with this method. Therefore, the production of hardfacing consumables via submerged flux-cored arc welding combination method was achieved firstly by using domestic raw materials, and one TUBITAK project and one PhD thesis were successfully finished with these data.

Anahtar Kelimeler

FCAW, SAW, Hardfacing, Wear resistance, Mechanical properties, Metallurgical properties

Destekleyen Kurum

TÜBİTAK

Proje Numarası

3130488

Teşekkür

This research includes a part of a successfully completed PhD thesis with the support of TÜBİTAK-TEYDEB project number 3130488. I would like to thank TÜBİTAK, Ege University and Oerlikon for their contributions.

Kaynakça

• [1] Jamrozik, W., and Jacek G. "Assessing MMA welding process stability using machine vision-based arc features tracking system." Sensors 21.1, 2020, 84, https://doi.org/10.3390/s21010084.
• [2] Shankhwar, K., and Shana S. "Finite element analysis results visualization of manual metal arc welding using an interactive mixed reality-based user interface." Journal of Manufacturing Processes 93, 2023, pp. 153-161, https://doi.org/10.1016/j.jmapro.2023.03.001.
• [3] Nalle, C.Y.A., Aditya, M. B., Putra, F. G. A. P., Nalle, M. N., and Sumarta, R. P. "Analysis of Electric Current on Aluminum Plate Welding Using MMA (Manual Metal Arc) Method." Proceeding of International Conference on Artificial Intelligence, Navigation, Engineering, and Aviation Technology (ICANEAT). Vol. 1. No. 1. 2024, Vol. 1, No. 1, pp. 144-146, https://doi.org/10.61306/icaneat.v1i1.222.
• [4] Sitorus, M. B. H. “Effect of welding heat input on the corrosion rate of carbon steel MMA welding.” International journal of innovation in mechanical engineering and advanced materials, 3(1), 2021, pp. 26-31,
• [5] Kővágó, C., Szekeres, B., Szűcs-Somlyó, É., Májlinger, K., Jerzsele, Á., and Lehel, J. “Preliminary study to investigate the distribution and effects of certain metals after inhalation of welding fumes in mice.” Environmental Science and Pollution Research, 29(32), 2022, pp. 49147-49160, https://doi.org/10.1097/00043764-198005000-00007.
• [6] Faqih, I. A., Ma'arif, S., and Sukarjo, H. “The effect of current variation on mma welding to mechanical properties and microstructure of mild steel.” In Proceeding International Conference on Materials Science and Technology, Vol. 1, No. 1, 2019, pp. 21-26.
• [7] Silva, R. H. G., Dutra, J. C., andGohr Jr, R. “Scientific and technological fundamentals for the development of the controlled short-circuiting MIG/MAG welding process: a review of the literature. Part 2 of 3. Metal droplet formation, shield gases, penetration mechanisms, heat input and economical aspects.” Welding International, 23(2), 2019, pp. 141-149, https://doi.org/10.1080/09507110802349700.
• [8] Şenol M. and Çam G., “Investigation into microstructures and properties of AISI 430 ferritic steel butt joints fabricated by GMAW”, International Journal of Pressure Vessels and Piping, 2023, Vol. 202, Article Number: 104926. https://doi.org/10.1016/j.ijpvp.2023.104926.
• [9] Ezer M. and Çam G., “A Study on microstructure and mechanical performance of gas metal arc welded AISI 304L joints”, Materialwissenschaft und Werkstofftechnik (Material Science and Engineering Technology), 2022, Vol. 53, Iss. 9, pp. 1043-1052. https://doi.org/10.1002/mawe.202200050.
• [10] Serindağ H.T. and Çam G., “Microstructure and mechanical properties of gas metal arc welded AISI 430/AISI 304 dissimilar stainless steels butt joints”, Journal of Physics: Conference Series, 2021, Vol. 1777, Paper No: 012047. https://doi.org/10.1088/1742-6596/1777/1/012047.
• [11]. Serindağ H.T. and Çam G., “Multi-pass butt welding of thick AISI 316L plates by gas tungsten arc welding: Microstructural and mechanical characterization”, International Journal of Pressure Vessels and Piping, 2022, Vol. 200, Article Number: 104842. https://doi.org/10.1016/j.ijpvp.2022.104842. [12]. Serindağ H.T. and Çam G., “Characterizations of microstructure and properties of dissimilar AISI 316L/9Ni low alloy cryogenic steel joints fabricated by GTAW”, Journal of Materials Engineering and Performance (JMEPEG), 2023, Vol. 32, pp. 7039-7049. https://doi.org/10.1007/s11665-022-07601-x.
• [13]. Serindağ H.T., Tardu C., Kirçiçek I.Ö, Çam G., “A study on microstructural and mechanical properties of gas tungsten arc welded thick cryogenic 9% Ni alloy steel butt joint”, CIRP Journal of Manufacturing Science and Technology, 2022, Vol. 37, pp. 1-10. https://doi.org/10.1016/j.cirpj.2021.12.006.
• [14]. Çam G., Yeni Ç., Erim S., Ventzke V., and Koçak M., “Investigation into properties of laser welded similar and dissimilar steel joints”, Sci. Technol. Weld. Join., 1998, Vol. 3 (Iss. 4), pp. 177-189. https://doi.org/10.1179/stw.1998.3.4.177.
• [15]. Küçükömeroğlu T., Aktarer S.M., İpekoğlu G., and Çam G., “Investigation of mechanical and microstructural properties of friction stir welded dual phase (DP) steel”, IOP Conf. Series: Materials Science and Engineering, 2019, Vol. 629, Paper No: 012010. https://doi.org/10.1088/1757-899X/629/1/012010.
• [16]. İpekoğlu G., Küçükömeroğlu T., Aktarer S.M., Sekban D.M., and Çam G., “Investigation of microstructure and mechanical properties of friction stir welded dissimilar St37/St52 joints”, Materials Research Express, 2019, Vol. 6, Iss. 4, Article Number: 046537. https://doi.org/10.1088/2053-1591/aafb9f.
• [17]. Küçükömeroğlu T., Aktarer S.M., İpekoğlu G, and Çam G., “Microstructure and mechanical properties of friction stir welded St52 steel joints”, International Journal of Minerals, Metallurgy and Materials, 2018, Vol. 25, Iss. 12, pp. 1457-1464. https://doi.org/10.1007/s12613-018-1700-x.
• [18] Coetsee, T., and De Bruin, F. “A Review of the Thermochemical Behaviour of Fluxes in Submerged Arc Welding: Modelling of Gas Phase Reactions.” Processes, 11(3), 2023, p-658, https://doi.org/10.3390/pr11030658.
• [19] Jia, Y., Huang, N., Zhang, J., Xiao, J., Chen, S., and Huang, W. “Current research status and prospect of metal transfer process control methods in gas metal arc welding.” The International Journal of Advanced Manufacturing Technology, 128(7-8), 2023, 2797-2811, https://doi.org/10.1007/s00170-023-12028-2.
• [20] Singh, A., and Singh, R. P. “A review of effect of welding parameters on the mechanical properties of weld in submerged arc welding process.” Materials Today: Proceedings, 26, 2020, 1714-1717, https://doi.org/10.1016/j.matpr.2020.02.361.
• [21] Coetsee, T. “Phase chemistry of Submerged Arc Welding (SAW) fluoride based slags.” Journal of Materials Research and Technology, 9(5), 2020, 9766-9776, https://doi.org/10.1016/j.jmrt.2020.06.069.
• [22] Özkan, E. “Investigation of Metallurgical Characterization and Mechanical Behaviour for Submerged Flux Cored Arc Welding Process.” Çelik Araştırma ve Geliştirme Dergisi, 4(1), 2023, pp.1-9.
• [23] Mohamat, S. A., Ibrahim, I. A., Amir, A., and Ghalib, A. “The effect of flux core arc welding (FCAW) processes on different parameters.” Procedia Engineering, 41, 2012, pp.1497-1501, doi: 10.1016/j.proeng.2012.07.341.
• [24] Świerczyńska, A., Varbai, B., Pandey, C., and Fydrych, D. “Exploring the trends in flux-cored arc welding: scientometric analysis approach.” The International Journal of Advanced Manufacturing Technology, 130(1), 2024, 87-110, https://doi.org/10.1007/s00170-023-12682-6.
• [25] Costa, P. S., Altamirano-Guerrero, G., Ochoa-Palacios, R. M., Reséndiz-Flores, E. O., Guía-Hernández, L. A., and Ramírez-Luna, L. E. “Optimization of welding parameters in underwater wet FCAW on a structural steel using support vector regression and sequential quadratic programming.” The International Journal of Advanced Manufacturing Technology, 121(5), 2022, pp. 4225-4236, https://doi.org/10.1007/s00170-022-09584-4.
• [26] da Silva, M. S., Souza, D., de Lima, E. H., Bianchi, K. E., and Vilarinho, L. O. “Analysis of fatigue-related aspects of FCAW and GMAW butt-welded joints in a structural steel.” Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42(1), 2020, 67, https://doi.org/10.1007/s40430-019-2142-8.
• [27] Dhas, J. E. R., Lewise, K. A. S., and Laxmi, G. “Submerged arc welding process parameter prediction using predictive modeling techniques.” Materials Today: Proceedings, 64, 2022, 402-409, https://doi.org/10.1016/j.matpr.2022.04.757.
• [28] Wahidi, S. I., Oterkus, S., and Oterkus, E. “Robotic welding techniques in marine structures and production processes: A systematic literature review.” Marine Structures, 95, 2024, 103608, https://doi.org/10.1016/j.marstruc.2024.103608.
• [29] Kumar, R., Biswas, S., Das, S., and Ershad, M. “Experimental Investigation of Welding Parameters on Mild Steel Using Metal Active Gas Welding.” Journal of Mines, Metals & Fuels, 71, 2023, 11.
• [30] Özkan, E. “Endüstriyel Uygulamalar İçin Gerekli Mekanik ve Metalurjik Özelliklere Sahip Tozaltı Kaynak Tozu ve Özlü Tel Kombinasyonunun Karakterizasyonu” completed PhD Thesis, Ege Universitesi Fen Bilimleri Enstitüsü, 2015, İzmir.
• [31] Neves, A. C., Sartori M. J. R., Corrêa, C. A., and Trevisani O. E. F. “Study of arc welding stability in flux cored arc welding process and pulsed continuous current.” Welding International, 35(4-6), 2021, pp. 158-169, https://doi.org/10.1080/09507116.2021.1971936.
• [32] Xu, S., Han, Y., Jia, C., Maksymov, S., Kakhovskyi, M., and Wu, C. “Numerical modeling of coupled arc plasma, metal transfer and molten pool evolution for underwater flux-cored arc welding.” The International Journal of Advanced Manufacturing Technology, 123(7), 2022, pp. 2605-2622, https://doi.org/10.1179/stw.2001.6.6.387.
• [33] Xu, S., Han, Y., Jia, C., Maksymov, S., and Wu, C. “3D non-axisymmetric numerical analysis of droplet oscillation, arc drifting and molten pool evolution for underwater wet FCAW.” Journal of Materials Processing Technology, 320, 2023, 118101, https://doi.org/10.1016/j.jmatprotec.2023.118101.
• [34] Gürol, U., Çoban, O., Coşar, İ. C., and Koçak, M. “Effect of the notch location on the Charpy-V toughness results for robotic flux-cored arc welded multipass joints.” Materials Testing, 64(9), 2022, pp. 1278-1289, https://doi.org/10.1515/mt-2022-0113.
• [35] Kumar, A., and Vijayakumar, P. “Comparison of Weld Built-up by FCAW and MIG Welding on Damaged Low Cr-Mo Alloy Steel Tube in Boiler Application.” International Journal of Science and Research Archive, 8(2), 2023, pp. 492-505, https://doi.org/10.30574/ijsra.2023.8.2.0243.
• [36] Balasubramanian, K., Vikram, R., Sambath, S., Sowrirajan, M., Arunachalashiva, M., Abhijith, P. V., and Deepak, D. “Optimization of flux cored arc welding parameters to minimize the dilution percentage of AISI 316L stainless steel cladding on mild steel.” International Journal on Interactive Design and Manufacturing (IJIDeM), 2023, pp. 1-11, https://doi.org/10.1007/s12008-023-01487-2.
• [37] Costa, P. S., Altamirano-Guerrero, G., Ochoa-Palacios, R. M., Ramirez-Luna, L. E., Guía-Hernández, L. A., de Luna-Jiménez, I. F., and Buendía-Carrillo, A. “Study of surface porosity of underwater wet welding employing FCAW-S process in structural steels.” MRS Advances, 8(2), 2023, pp. 34-38, https://doi.org/10.1557/s43580-022-00477-y.
• [38] Sharma, S., and Singh, L. “A Review on the Flux Cored Arc Welding through Process Parameter.”, International Journal of Scientific Research in Mechnanical and Materials Engineering, 47, 2023, pp. 777-780. [39] Oo, H. Z., and Muangjunburee, P. “Improving microstructure and hardness of softening area at HAZ of thermite welding on rail running surface.” Materials Today Communications, 34, 2023:105485, https://doi.org/10.1016/j.mtcomm.2023.105485.
• [40] Girişken İ. and Çam G., “Characterization of microstructure and high-temperature wear behavior of pack-borided Co-based Haynes 25 superalloy”, CIRP Journal of Manufacturing Science and Technology, 2023, Vol. 45, pp. 82-98. https://doi.org/10.1016/j.cirpj.2023.06.012.
• [41] Günen A., Gürol U., Koçak M., and Çam G., “Investigation into the influence of boronizing on the wear behavior of additively manufactured Inconel 625 alloy at elevated temperature”, Progress in Additive Manufacturing, 2023, Vol. 8, pp. 1281-1301. https://doi.org/10.1007/s40964-023-00398-8.
• [42] Girişken İ. and Çam G., “Boriding of Co-based Haynes 25/L-605 superalloy”, Journal of Characterization, 2022, Vol. 2, Iss. 3, pp. 206-219. https://doi.org/10.29228/JCHAR.66388.
• [43] Srikarun, B., Oo, H. Z., and Muangjunburee, P. “Influence of different welding processes on microstructure, hardness, and wear behavior of martensitic hardfaced cladding.” Journal of Materials Engineering and Performance, 30(12), 2021, pp. 8984-8995, https://doi.org/10.1007/s11665-021-06109-0.
• [44] Rojacz, H., Katsich, C., Kirchgaßner, M., Kirchmayer, R., & Badisch, E. “Impact-abrasive wear of martensitic steels and complex iron-based hardfacing alloys.” Wear, 492, 2022, 204183 https://doi.org/10.1016/j.wear.2021.204183.
• [45] Tippayasam, C., Taengwa, C., Palomas, J., Siripongsakul, T., Thaweechai, T., and Kaewvilai, A. “Effects of flux-cored arc welding technology on microstructure and wear resistance of Fe-Cr-C hardfacing alloy.” Materials Today Communications, 35, 202, 105569, https://doi.org/10.1016/j.mtcomm.2023.105569.
• [46] Oo, H. Z., and Muangjunburee, P. “Hardfacing of thermite welded rail by flux-cored arc welding.” Wear, 2024, 205314. https://doi.org/10.1016/j.wear.2024.205314.
• [47] Wijayanto, B., and Ringan, T. K. “The Effect of Welding Current with Smaw Process for Medium Carbon Steel Hardfacing On Micro Structure, Hardness, and Cracking.” Jurnal Teknik dan Manajemen p-ISSN, 2(2), 2022, https://doi.org/10.47577/technium.v4i5.6674.