DETERMINATION THERMAL AND MECHANICAL PROPERTIES OF NANO CARBON, GRAPHITE AND GRAPHENE REINFORCED RECYCLING POLYPROPYLENE COMPOSITE SAMPLES

Yıl 2024, Sayı: 058, 122 - 134, 29.09.2024

Ömer Şengül , Ferhat Çalışkan , Menderes Kam

https://doi.org/10.59313/jsr-a.1318446

Öz

Polymer-based plastic materials occupy a major place in daily life. However, due to the nature of polymer materials, low thermal resistance and mechanical properties of these products, the need for new and sustainable materials in the industry has increased. With the rapid technological developments in advanced manufacturing industries such as aviation, marine, motor sports and defence industry, lightweight and high-strength composite products have become even more important. In this context, in this study, 1% carbon, graphene and graphite particle reinforced Polypropylene (PP) composite material mixed in a twin-screw extruder and MA/G series injection moulding machine standard tensile test sample produced. Melt Flow Index (MFI), Heat Deformation Test (HDT), tensile test, Shore-D hardness measurement and density tests performed on these test samples. According to the results obtained from these tests, the mechanical and thermal properties of the test samples produced from different composite materials were determined. The best mechanical and thermal properties occurred in the graphene particle. It formed in graphite and carbon, respectively.

Anahtar Kelimeler

Polypropylene, graphene, graphite, carbon, injection production, mechanical properties, thermal properties.

Kaynakça

• [1] T. Dombrowski, “Nano carbonate minerals in wood polymer composites (WPC)”. The Chancing Technology in WPCs. The First World Congress on Woodfibre /Plastics and Related Composites. San Francisco. CA. pp. 45-60. 2006.
• [2] K. Gündoğan, D. Karaağaç, (2020). Grafen Takviyeli PS Kompozitlerinin Yapisal, Isil Ve Mekanik Özelliklerinin İncelenmesi. Bilge International Journal of Science and Technology Research, 4(1), 21-26. https://doi.org/10.30516/bilgesci.640084
• [3] M.C. Şenel, A. Taşkin, M. Demir, M. Gürbüz, (2024). İndüksiyonla sıcak işlemin Si3N4 ve grafen takviyeli Al6061 matrisli kompozitlerin mekanik ve tribolojik özelliklerine olan etkisi. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, 39(3), 1567-1582. https://doi.org/10.17341/gazimmfd.1226420.
• [4] T. Türkoğlu, S. Çelik, N. Aslan, E. Atik, (2023). The effect of processing parameters on the wear properties Al6061/GNP composites produced by hot pressing. Balıkesir Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 25(1), 1-12. https://doi.org/10.25092/baunfbed.1120301
• [5] I. Sudarisman, J.N. Davies, H. Hamada, “Compressive failure of unidirectional hybrid fibre-reinforced epoxy composites containing nano carbon and silicon carbide fibres “. Composites. 38:1070-1074. 2007.
• [6] A.Subaşi, M. Zurnaci, M. Kahyaoğlu, and E. Demir, “Polyester/Grafen Kompozitlerin Mekanik ve Termal Özelliklerinin İncelenmesi”, ECJSE, vol. 4, no. 3, pp. 472–481, 2017, doi: 10.31202/ecjse.327707.
• [7] G. Hatipoğlu, H. Ünal, S.H. Yetgin, (2023). Karbon Fiber Takviyeli Poli-fital-amit (PPA) Kompozit ve Saf PPA Polimerinin Tribolojik Özelliklerinin Karşılaştırılması. Gazi University Journal of Science Part C: Design and Technology, 11(3), 744-755. https://doi.org/10.29109/gujsc.1288917
• [8] M. Kam, A. İpekçi, and Ö. Şengül, 2023. Investigation of the effect of FDM process parameters on mechanical properties of 3D printed PA12 samples using Taguchi method. Journal of Thermoplastic Composite Materials 36, 1, 307–325.
• [9] Ö. Şengül, C. Tugaytimur, M. Şeremet, Experimental investigation of Mechanical and Thermal properties of polyethylene- Graphane-Reinforced Composites. (05.09.2019 -07.09.2019). Yayın Yeri: International academic research congress (INES 2019).
• [10] H. Demirer, et al. “Polipropilenin Eğilme Özelliklerine Geri Dönüşümlü EPDM Boyutlarının Etkisi.” European Journal of Science and Technology 15 .381–386. 2019.
• [11] İ. Kartal, G. Naycı and H. Demirer, “Kestane Gürgen Talaşı Dolgulu Vinilester Kompozitlerin Mekanik Özelliklerinin İncelenmesi.” Avrupa Bilim ve Teknoloji Dergisi. no. 16. pp. 723–728. 2019.
• [12] H. Ünal, S. Yetgin, V.F. Ünal, (2023). Kati Yağlayici Olarak Grafit Katkili Naylon 6 Kompozitlerin Mekanik Ve Tribolojik Performanslari. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, 26(4), 853-865. https://doi.org/10.17780/ksujes.1300407
• [13] H. Demirer, İ. Kartal, and A.Yildirim, “The Utilisability of Ground Hazelnut Shell as Filler in Polypropylene Composites.” Presented at the 7. International advances in applied physics and materials science congress. 2017.
• [14] A. Şahin, H. Çinici, E. Mermer, (2023). Bor Elyaf Takviyeli Polimer Kompozit Malzemelerin Termal Özelliklerine Nano Bor İlavesinin Etkileri. International Journal of Engineering Research and Development, 15(1), 82-90. https://doi.org/10.29137/umagd.1133717
• [15] R. Karslıoğlu, M. Akçil, M. Uysal, G. Bağdatlı , A. Alp and H. Akbulut. "Sıcaklık değişiminin akım sinterleme yöntemi üretilmiş Zn-Al/SiC/Gr hibrit kompozitlerin mikroyapı ve fiziksel özelliklerine etkisi". Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi. vol. 38. no. 4. pp. 2339-2346. Apr. 2023. doi:10.17341/gazimmfd.847323
• [16] M.Y. Yazici, (2023). The Effect of Phase Change Temperature of Graphite Matrix Composite on Small-Scale Li-Ion Package Performance Under Square Wave Load. Yüzüncü Yıl Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 28(2), 651-666. https://doi.org/10.53433/yyufbed.1175411
• [17] M. Gürbüz, T. Mutuk, (2019). Karbon Esaslı Malzeme Takviyeli Titanyum Kompozitler ve Grafen Üzerine Yeni Eğilimler, Mühendis ve Makina. 60 (695). 101-118. Retrieved from https://dergipark.org.tr/en/pub/muhendismakina/issue/48382/612537.