klujes Kirklareli University Journal of Engineering and Science 2458-7494 2458-7613 Kırklareli Üniversitesi Engineering Mühendislik APPLICATIONS OF PLASMA TECHNOLOGY IN ENERGY SECTOR Yazıcıoğlu Özge ARTECS Anadolu R&D Technology Engineering and Consultancy Inc. Katırcıoğlu T.yaşar ARTECS Anadolu R&D Technology Engineering and Consultancy Inc. 06 30 2017 3 1 18 44 05 10 2017 Copyright © 2015, Kırklareli Üniversitesi Mühendislik ve Fen Bilimleri Dergisi 2015 Kırklareli Üniversitesi Mühendislik ve Fen Bilimleri Dergisi

Today, the use of plasma technology in production ofenergy from waste, biomass and coal has become quite widespread in the worlddue to the unique and outstanding features of plasma. Experimental andtheoretical studies have shown that plasma based system in energy production isa promising alternative to classical system in terms of efficiency, environmentaland economic aspects. Plasma assisted combustion, gasification and pyrolysisare different methods used in energy production. Considering the plasmatechnology applications in energy sector, it is widely used in developedcountries like Europe and USA for the energy production from the waste andbiomass, but plasma is generally preferred in eastern countries like China,Kazakhstan and Russia for plasma coal gasification and plasma assisted coalburning at thermal plant. Different plasma torch systems (AC, DC and RF) usedin these applications are seen in the literature. This paper gives an overviewon plasma technologies in energy production from different energy sources(waste, biomass, coal) by different techniques such as combustion, gasificationand pyrolysis. In comparison of AC, DC and RF plasma torches in the scientificliterature, it has been considered that AC plasma torch is a prominenttechnology due to some advantages especially in high power as megawatt levels.Lastly, economic assessment is presented and estimated budget for systeminstallation is given for different systems. Although the technology readinesslevel of the plasma technologies has a level of maturity (over 6) in ourfacilities at AR&TeCS (ARTECS Inc., Ankara University Technopolis, Gölbaşı,Ankara), the application on the different type of waste management or plasmaassisted coal burning/gasification needs some additional R&D activitiesespecially in simulation and modelling for obtaining optimum conditions,process development and controlling of gasification/combustion process.Finally, some technical experience from the high-power alternating current (AC)plasma system established at AR&TeCS is shared.

 Plasmatron High power Alternative Current AC Coal Biomass Waste [1] Louis A. Rosocha, An Overview of Plasma Assisted Combustion: History and Applications, 5th International Workshop and Exhibition on Plasma Assisted Combustion (IWEPAC), USA, 24-25, 2009. [2] Chen F. F., Introduction to Plasma Physics and Controlled Fusion, Second Edition, Vol.1 California, 1983. [3] Byun Y., Cho M., Hwang S., Chung J., Gasification for Practical Applications, Thermal Plasma Gasification of Municipal Solid Waste (MSW), ISBN 978-953-51-0818-4, 2012. [4] Tendero C., Tixier C., Tristant P., Desmaison J., Leprince P., Atmospheric Pressure Plasmas: A Review, Spectrochimica Acta Part B 61 2-30, 2006. [5] Karpenko E., Messerle V., Ustimenko A., Plasma Application for Coal Combustion Activation, 31st EPS Conference on Plasma Phys, London, Vol.28G, P-1.023, 1-4, 2004. [6] Rohani V., Takali S., Gerard G., Fabry F., Cauneau F., Fulcheri L., A New Plasma Electro-Burner Concept for Biomass and Waste Combustion, Springer, pp. 1-15, 2017. [7] Carabin P., Gagnon J. R., Thermal Destruction Of Waste Using Plasma, Biomass and Waste to Energy Symposium Venice, Italy, 2006. [8] Basu P., Biomass Gasification and Pyrolysis Practical Design and Theory, ISBN 978-0-12-374988-8, US., 2010. [9] Nzihou A., Toward the Valorization of Waste and Biomass, Waste Biomass Valor, Springer, 1:3-7, 2010. [10] Fabry F., Rehmet C., Rohani V., Fulcheri L., Waste Gasification by Thermal Plasma: A Review, Waste Biomass Valor, Springer, doi. 10.1007/s12649-013-9201-7, 2013. [11] Gorokhovski M. A., Jankoski Z., Lockwood F. C., Karpenko E. I., Messerle V. E. and Ustimenko A. B., Enhancement of Pulverized Coal Combustion by Plasma Technology, Combustion Science and Technology, 179:10, 2065-2090, 2007. [12] Messerle V. E., Lavrichshev O. A., Ustimenko A. B., Plasma Chemical Gasification of Solid Fuel with Mineral Mass Processing, World Academy of Science, Engineering and Technology, Vol.9, No:7, 2015. [13] M. Gorokhovski, E. I. Karpenko, F. C. Lockwood, V. E. Messerle, B. G. Trusov and A. B. Ustimenko, Plasma Technologies For Solid Fuels: Experiment And Theory, Journal of the Energy Institute, Vol.78, No:4, 2005. [14] Bayrak Ö, TÜBA Temiz Kömür Teknolojileri Çalıştayı ve Paneli, Türkiye’nin Kömür Potansiyeli ve Hedefler, ODTÜ, Ankara, 2017. [15] Republic of Turkey Ministry of Energy and Natural Resources, http://www.enerji.gov.tr/en-US/Pages/Coal, Last accessed: 06.07.2017. [16] Dodge E., Plasma-Gasification of Waste Clean Production of Renewable Fuels through the Vaporization of Garbage Cornell University – Johnson Graduate School of Management Queens University School of Business, 2008. [17] İbrahimoğlu, B, Plazma teknolojileri. Ürün Yayınları, ISBN 978-605-4938-12-4, Ankara, 2014. [18] Tendler M., Rutberg P., and Oost G., Plasma Based Waste Treatment And Energy Production, Institute of Physics Publishing, Plasma Physics and Controlled Fusion, 47 A219-A230, 2005. [19] Ozturk M., Waste Management in Turkey: Sustainable Resource Management, Republic of Turkey Ministry of Environment and Urbanization, 2014. [20] Zhukov M.F. and Zasypkin I.M., Thermal Plasma Torches Design, Characteristics, Applications, ISBN 978-1-904602-02-6, UK, 2007. [21] Byun Y., Namkung W., Cho M., Chung J. W., Kim Y., Lee J., Lee C., Hwang S., Demonstration Of Thermal Plasma Gasification/Vitrification For Municipal Solid Waste Treatment, Environ. Sci. Technol. 44, pp. 6680-6684, 2010. [22] Ducharme C., Technical and Economic Analysis of Plasma-Assisted Waste To Energy Processes, M.S. Degree, Department of Earth and Environmental Engineering Fu Foundation of Engineering and Applied Science Columbia University, (79 pages) 2010. [23] M. Hrabovsky, Plasma Aided Gasification of Biomass, Organic Waste and Plastics, 30th ICPIG, Northern Ireland, UK, 2011. [24] World Bank: "What a Waste.” March, 2012, website: http://www.gasification-syngas.org/applications/waste-to-energy-gasification, Last accessed: 06.07.2017. [25] Energy From Waste A Guide To The Debate, Department for Environmen Food & Rural Affairs, www.gov.uk/defra, 2014. [26] Incineration of Municipal Solid Waste, Department for Environment Food&Rural Affairs, February 2013. [27] Yassin L., Lettieri P., Simonsa S.J.R., Germanà A., Techno-Economic Performance Of Energy-From-Waste Fluidized Bed Combustion And Gasification Processes In The UK Context, Elsevier Chemical Engineering Journal 146, pp. 315-327, 2009. [28] T.C. Çevre ve Şehircilik Bakanlığı, Tehlikeli Atık İstatistikleri Bülteni (2015), 6, 2016. [29]Eurostat,http://ec.europa.eu/eurostat/statisticsexplained/index.php/File:Municipal_waste_treatment_by_type_of_treatment,_EU-27,_(kg_per_capita),_1995_-_2015-F2.png, Last accessed: 06.07.2017. [30] Nishikawaa H., Ibe M., Tanaka M., Takemoto T., Ushio M., Effect Of Dc Steam Plasma On Gasifying Carbonized Waste, Elsevier Vacuum, Vol. 80, 11-12, pp. 1311-1315, 2006. [31] Li J., Liu K., Yan S., Li Y., Han D., Application Of Thermal Plasma Technology For The Treatment Of Solid Wastes In China: An Overview, Vol.58, pp. 260-269, 2016. [32] Blees T., Prescription for the Planet, The Painless Remedy for our Energy & Environmental Crises, BookSurge Publishing, 1-4196-5582-5, 2008. [33] Young G. C., “From Waste Solids to Fuel,” Pollution Engineering, pp. 45-49, 2008. [34] Young G. C., “Garbage In, Power Out, How Trash Can Power Ethanol Plants,” Public Utility Fortnightly, pp. 72-76, 2007. [35] Young G. C., “Zapping MSW with Plasma Arc, An economic evaluation of a new technology for municipal solid waste treatment facilities,” Pollution Engineering, 2002. [36] Rutberg, PhG., Bratsev, AN., Kuznetsov, VA., Popov, VE., Ufimtsev, AA., Shtengel’, SV.: On efficiency of plasma gasification of wood residues. Biomass and Bioenergy 35, pp. 495-504, 2011. [37] Karpenko E. I., Karpenko Y. E., Messerle V. E. and Ustimenko A. B., Using Plasma-Fuel Systems at Eurasian Coal-Fired Thermal Power Stations, 56: 456, 2009. [38] Karpenko E. I., Messerle V. E., and Ustimenko A. B., Use of Plasma Fuel Systems at Thermal Power Plants in Russia, Kazakhstan, China, and Turkey, ISSN 0018-1439, High Energy Chemistry, Vol. 43, pp 224-228, Pleiades Publishing, 2008. [39] Fulcheri L., Fabry F., Takali S., Rohani V., Three-Phase AC Arc Plasma Systems: A Review, Springer, Plasma Chemistry and Plasma Processing, Volume 35, 4, pp 565-585, New York, 2015. [40] Svirchuk Y. S. and Golikov A. N., Three-Phase Zvezda-Type Plasmatrons, Ieee Transactions On Plasma Science, Vol. 44, 12, 2016. [41] Degrez G., Abeele D.V., Barbante P., and Bottin B., Numerical Simulation of Inductively Coupled Plasma Flows and Hypersonıc (Re-)entry Flows, European Congress on Computational Methods in Applied Sciences and Engineering, 2000. [42] Toraman S., Katircioglu T. Y., Terzi Ç., The High-Power Arc-jet Plasma Generator (Plasma Torch) Characteristics and Performance, The Journal of Defense Sciences, Savunma Bilimleri Dergisi, Accepted in June 2017. [43] Ghorui S., Tiwari N., Meher K.C., Jan A., Bhat A., Sahasrabudge S.N., Direct Probing Of Anode Arc Root Dynamics And Voltage Instability In A Dc Non-Transferred Arc Plasma Jet, Plasma Sources Science and Technology, Vol. 24, 6, 2015. [44] Gomez E., Rani D. A., Cheeseman C.R., Deegan D., Wise M., Boccaccini A.R., Thermal Plasma Technology For The Treatment Of Wastes: A Critical Review, Elsevier, Journal of Hazardous Materials, Vol. 161, 2-3, pp. 614-626, 2009. [45] Mostaghimi J., Boulos M. I., Thermal Plasma Sources: How Well are They Adopted to Process Needs?, Springer, Plasma Chemistry and Plasma Processing, Vol. 35, 3, pp. 421-436, 2015. [46] Boulos M.I., Fauchais P., and Pfender E., DC Plasma Torch Design and Performance, Handbook of Thermal Plasmas, pp. 1-63, 2016. [47] Szente RN, Munz RJ, Drouet MG, Effect Of The Arc Velocity On The Cathode Erosion Rate In Argonnitrogen Mixtures, 1987. [48] Szente RN, Munz RJ, Drouet MG, Arc Velocity And Cathode Erosion Rate In A Magnetically Driven Arc Burning In Nitrogen, Journal of Physics D: Applied Physics, Vol.21, 6, 1988. [49] Reed T.B., Induction-Coupled Plasma Torch, AIP Journal of Applied Physics, Vol. 32, 5, 821, 1960. [50] Matveev, et al, Development and Experimental Investigations of High Power Hybrid Waste Biomass Valor Plasma torches—5th International Workshop and Exhibition on Plasma Assisted Combustion (IWEPAC), Alexandria, Virginia, 2009. [51] Rutberg P.G., Kuznetsov V.A., Serba E.O., Popov S.D., Surov A.V., Nakonechny G. V., Nikonov A.V., Novel three-phase steam–air plasma torch for gasification of high-caloric waste, Applied Energy 108, pp. 505-514, 2013. [52] Yazicioglu O., Katircioglu T.Y., İbrahimoğlu B., Temperature Measurement of a High Power Plasmatron Plasma Flow Using Optical Emission Spectroscopy, Sühad, Sürdürülebilir Havacılık Araştırmaları Dergisi, Accepted in April, 2017. [53] Rehmet C., Theoretical and experimental study of a 3-phase AC plasma torch associated to a gasification process (in French), PhD thesis dissertation defended on 23 September, 2013, MINES-ParisTech (196 pages). [54] Takali S., Etude Théorique D’un Électrobruleur Industriel Dote D’une Torche À Arc Triphasée Pour La Valorization Énergétique De Combustibles À Faible Pouvoir Calorifique (in French), PhD thesis dissertation defended on December 2, 2015, MINES-ParisTech (227 pages). [55] Higman C., Burgt M., Gasification, ISBN 978-0-7506-7707-3, 2003. [56] Zhao Y., Sun S., Zhou H., Sun R., Tian H., Luan J., Qian J., Experimental study on sawdust air gasification in an entrained-flow reactor, Elsevier, Fuel Processing Technology Vol. 91, 8, pp. 910-914, 2010. [57] Huang H., Tang L., Treatment of Organic Waste Using Thermal Plasma Pyrolysis Technology. Energy Conversion and Management, Vol. 48, pp. 1331–1337, 2007. [58] Tang, L., Huang, H., Zhao, Z., Wu, C.Z., Chen, Y.: Pyrolysis of Polypropylene in A Nitrogen Plasma Reactor. Ind. Eng. Chem. Res. 42, pp. 1145–1150, 2003. [59] Bridgwater A.V., Toft A.J., Brammer J.G., A Techno-Economic Comparison of Power Production By Biomass Fast Pyrolysis With Gasification And Combustion, Renewable and Sustainable Energy Reviews, Vol.6, 3, UK, 2002. [60] Rutberg Ph G, Safronov A A, Popov S D, Surov A V and Nakonechny Gh V, Multiphase Stationary Plasma Generators Working On Oxidizing Media, Iopscience, Plasma Physics and Controlled Fusion, Vol. 47, 10, 2005. [61] Cyranoski D., Waste management: One man’s trash, Nature, Vol.444, pp. 262-263, 2006. [62] Pourali M., Application of Plasma Gasification Technology in Waste to Energy Challenges and Opportunities, IEEE Transactions on Sustainable Energy, Vol. 1, 3, pp. 125-130, 2010. [63] Joos M, Colloquium Ghent University, Jozef Plateauzaal, Summary, 21 March, 2002.