SERAMİK MALZEMELERİN İŞLENMESİNDE UYGULANAN ALIŞILMAMIŞ İMALAT YÖNTEMLERİ

Year 2022, , 1061 - 1082, 03.12.2022

İsmail Aykut Karamanlı , Mustafa Günay

https://doi.org/10.36306/konjes.1091584

Abstract

Bu derleme çalışmada, seramiklerin talaşlı imalatında kullanılan alışılmamış imalat yöntemlerinin detaylı analizi yapılarak elde edilen kazanımlar ve eksiklerinin belirlenmesi amaçlanmıştır. Bu yöntemler arasında, aşındırıcı jet ile işleme ve aşındırıcı su jeti ile işleme, ultrasonik işleme ve döner ultrasonik işleme, elektro erozyon ve tel erozyon ile işleme en çok kullanılanlardır. Aşındırıcı jet ve aşındırıcı su jeti ile işleme diğer yöntemlere göre bazı üstün özelliklere sahip olması nedeni ile tercih sebebidir. Kesme bölgesinde çok az miktarda ısı üretmesi, metal, metal olmayan, kompozit, seramik gibi her türlü malzemenin kesilip işlenebilmesi, tel erozyon ile işleme işleminden daha yüksek bir malzeme çıkarma oranı ve lazer ile işleme işleminden daha iyi yüzey bütünlüğü sağlaması bu özelliklerden birkaçıdır. Ultrasonik ve döner ultrasonik işleme yöntemiyle, özellikle sert ve kırılgan malzemelerin hassas olarak işlenebilmesi ile diğer yöntemlere göre üstündür. Elektro erozyon ve tel erozyon ile işleme yönteminin tercih edilmesinin nedenleri, elektrik iletken her parça işlenebilmesi ve çok karmaşık şekillerde işleme sağlanabilmesi, takım ile iş parçası arasında temas olmadığı için fiziksel deformasyonun az olması, ısıl işlemden etkilenmiş bölgenin az olması olarak sıralanabilir. Gelecekteki araştırmalarda, talaş kaldırma hızı, yüzey kalitesi, enerji tüketimi ve işleme maliyetlerini içeren çok amaçlı optimizasyon çalışmalarına odaklanılması yüksek verimlilik ve sürdürülebilirlik noktasında önemli katkılar sağlayacaktır.

Keywords

Seramikler, Alışılmamış imalat, Elektro erozyonla işleme, Abrasive jet işleme, Ultrasonik işleme

Unconventional Manufacturing Methods Applied in Machining of Ceramic Materials

Abstract

In this review study, it is aimed to determine the gains and deficiencies obtained by making a detailed analysis of the unconventional manufacturing methods used in the machining of ceramics. The most used of these methods can be listed as abrasive jet machining and abrasive water jet machining, ultrasonic machining and rotary ultrasonic machining, electro erosion and wire erosion machining. Machining with abrasive jet and abrasive water jet is preferred with some superior features. Some of these features are that it generates very little heat in the cutting zone, can be cut and machined of all kinds of materials such as metal, non-metal, composite, ceramic, a higher material removal rate than wire erosion machining and better surface integrity than laser machining. With the ultrasonic and rotary ultrasonic processing method, it is superior to other methods, especially with the precision processing of hard and brittle materials. The reasons for choosing the electrical discharge machining and wire electrical discharge machining can be listed as the fact that every piece that conducts electricity can be processed, very complex shapes can be formed, physical deformation is less and the area affected by heat treatment is less since there is no contact between the tool and the workpiece. In future research, focusing on multi-purpose optimization studies including metal removal rate, surface quality and energy consumption and machining costs will make significant contributions to high productivity and sustainability.

Keywords

Ceramics, Unconventional manufacturing, Electrical discharge machining, Abrasive jet machining, Ultrasonic machining

References

• Abdo, B. M. A., Anwar, S., El-Tamimi, A., 2019, "Machinability study of biolox forte ceramic by milling microchannels using rotary ultrasonic machining", Journal of Manufacturing Processes, Cilt 43, ss. 175-191.
• Aich, U., Banerjee, S., Bandyopadhyay, A., Das, P. K, 2014, "Abrasive water jet cutting of borosilicate glass", Procedia Materials Science, Cilt 6, ss. 775-785.
• Anjaneyulu, B., Prahladharao, K., Nagamalleswararao, G., 2019, "Optimization of process parameters by using Taguchi Techniques in abrasive air jet machining of Al2O3 ceramic material", Materials Today: Proceedings, Cilt 19, ss. 140-147.
• Bhadauria, G., Jha, S. K., Roy, B. N., Dhakry, N. S., 2018, "Electrical-Discharge Machining of Tungsten Carbide (WC) and its composites (WC-Co) –A Review", Materials Today: Proceedings, Cilt 5, Sayı 11, ss. 24760-24769.
• Bilal, A., Jahan, M. P., Talamona, D., Perveen, A., 2018, "Electro-discharge machining of ceramics: A review", Micromachines, Cilt 10, Sayı 1, ss. 10.
• Chaitanya, A., Babu, D. K., Kumar, K. V. N. G., 2020, "Experimental study on surface roughness by using abrasive jet machine", Materials Today: Proceedings, Cilt 23, ss. 453-457.
• Chaudhury, P., S. Samantaray, 2020, "Multi-optimization of process parameters for machining of a non-conductive SiC ceramic composite by non-conventional machining method", Manufacturing Review, Cilt 7, Sayı 32.
• Chiles, V., Black, S., Lissaman, A., Martin, S., 1996, Principles of engineering manufacture, Butterworth-Heinemann, Oxford, İngiltere.
• Çolpan, M. H., 2019, "Seramik Yüzeylerin Lazerle İşlenmesi Üzerine Bir Çalışma", Selçuk Üniversitesi Fen Fakültesi Fen Dergisi, Cilt 45, Sayı 1, ss. 88-94.
• Daniel, S. A. A., Ananth, S. V., Parthiban, A., Sivaganesan, S., 2020, "Optimization of machining parameters in electro chemical machining of Al5059/SiC/MoS2 composites using taguchi method", Materials Today: Proceedings, Cilt 21, ss. 738-743.
• Dhanawade, A., Bhosle, R., Jagtap, R., Sorate, K. A., 2021, “Comparative Study of Lead Zirconate Titanate Ceramic and Carbon Fiber Reinforced Polymer Composite Surfaces Machined by Abrasive Water Jet”, Materials Today: Proceedings, Cilt 44, ss. 4628–4632.
• Du, J., Zhang, H., Geng, Y., Ming, W., He, W., Ma, J., Cao, Y., Li, X., Liu, K., 2019, "A review on machining of carbon fiber reinforced ceramic matrix composites", Ceramics International, Cilt 45, Sayı 15, ss. 18155-18166.
• Esmaeili, H., Adibi, H., Rezaei, S. M., 2019, "An efficient strategy for grinding carbon fiber-reinforced silicon carbide composite using minimum quantity lubricant", Ceramics International, Cilt 45, Sayı 8, ss. 10852-10864.
• Fard, R. K., Afza, R. A., Teimouri, R., 2013, "Experimental investigation, intelligent modeling and multi-characteristics optimization of dry WEDM process of Al–SiC metal matrix composite", Journal of Manufacturing Processes, Cilt 15, Sayı 4, ss. 483-494.
• Feng, P., Wang, J., Zhang, J., Zheng, J., 2017, "Drilling induced tearing defects in rotary ultrasonic machining of C/SiC composites." Ceramics International, Cilt 43, Sayı 1, ss. 791-799.
• Garg, M. P., Sharma, A., 2017, "Examination of accuracy aspect in machining of ZrSiO4p/6063 aluminium MMC using CNC wire electrical discharge machining", Composites Communications, Cilt 6, ss. 6-10.
• Gommeringer, A., Schweizer, C., Kern, F., Gadow, R., 2020, "Electrical discharge machinable (Y, Nd) co-stabilized zirconia–Niobium carbide ceramics", Journal of the European Ceramic Society, Cilt 40, Sayı 11, ss. 3723-3732.
• Gorin, A., Reddy, M. M., 2014, “Advanced ceramics: Some challenges and solutions in machining by conventional methods”, Applied Mechanics and Materials, Cilt 624, ss. 42-47.
• Goto, A., Nakata, A., Saito, N., 2016, "Study on Electrochemical Machining of Sintered Carbide", Procedia CIRP, Cilt 42, ss. 402-406.
• Gupta, K., Gupta M. K., 2019, "Developments in nonconventional machining for sustainable production: A state-of-the-art review", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Cilt 233, Sayı 12, ss. 4213-4232.
• Hanzel, O., Singh, M. A., Marla, D., Sedlák, R., Šajgalík, P., 2019, "Wire electrical discharge machinable SiC with GNPs and GO as the electrically conducting filler", Journal of the European Ceramic Society, Cilt 39, Sayı 8, ss. 2626-2633.
• Hess, R., Olivier, M., Schneider, S., Heidemanns, L., Klink, A., Herrig, T., Bergs, T., 2022, “Numerical Investigation of the EDM Induced Temperature Field in a Composite Ceramic”, Procedia CIRP, Cilt 108, Sayı 6, ss. 31–36.
• Hinduja, S., Kunieda, M., 2013, "Modelling of ECM and EDM processes", CIRP Annals, Cilt 62, Sayı 2, ss. 775-797. Jahan, M., Rahman, M., Wong, Y. S., 2011, "A review on the conventional and micro-electrodischarge machining of tungsten carbide", International journal of machine tools and manufacture, Cilt 51, Sayı 12, ss. 837-858.
• Ju, K., Chen, X., Zhao, Z., 2022, “Fabrication of Ti/TiO2 (Ca)/Hydroxyapatite Bioceramic Material by Micro-Arc Oxidation and Electrochemical Deposition”, Ceramics International, Cilt 48, Sayı 14, ss. 19937–19943.
• Kannan, V. S., Lenin, K., Navneethakrishnan, P., 2020, "Investigation in machining parameter of micro profile and surface characteristics of Al7475 with SiC alloy in LBM", Materials Today: Proceedings, Cilt 21, ss. 701-707.
• Kozak, J., Zybura-Skrabalak, M., 2016, "Some problems of surface roughness in electrochemical machining (ECM)", Procedia CIRP, Cilt 42, ss. 101-106.
• Kumar, V., Singh, H., 2018, "Regression analysis of surface roughness and micro-structural study in rotary ultrasonic drilling of BK7", Ceramics International, Cilt 44, Sayı 14, ss. 16819-16827.
• Kuo, K.-l., Tsao, C.-C., 2012, "Rotary ultrasonic-assisted milling of brittle materials", Transactions of Nonferrous Metals Society of China, Cilt 22, ss. 793-800.
• Kuruc, M., Vopát, T., Peterka, J., 2015, "Surface roughness of poly-crystalline cubic boron nitride after rotary ultrasonic machining", Procedia Engineering, Cilt 100, ss. 877-884.
• Li, C., Zhang, F., Meng, B., Liu, L., Rao, X., 2017, "Material removal mechanism and grinding force modelling of ultrasonic vibration assisted grinding for SiC ceramics", Ceramics International, Cilt 43, Sayı 3, ss. 2981-2993.
• Liang, Y., Dutta, S. P., 2001, "Application trend in advanced ceramic technologies", Technovation, Cilt 21, Sayı 1, ss. 61-65.
• Liu, D., Huang, C., Wang, J., Zhu, H., 2021, "Material removal mechanisms of ceramics turned by abrasive waterjet (AWJ) using a novel approach", Ceramics International, Cilt 47, Sayı 11, ss. 15165-15172.
• Liu, D., Huang, C., Wang, J., Zhu, H., Yao, P., Liu, Z., 2014, "Modeling and optimization of operating parameters for abrasive waterjet turning alumina ceramics using response surface methodology combined with Box–Behnken design", Ceramics International, Cilt 40, Sayı 6, ss. 7899-7908.
• Ludwig, C., Rabold, F., Kuna, M., Schurig, M., Schlums, H., 2020, "Simulation of anisotropic crack growth behavior of nickel base alloys under thermomechanical fatigue", Engineering Fracture Mechanics, Cilt 224, 106800.
• Miyoshi, K., Kunieda, M., 2016, "Fabrication of micro rods of cemented carbide by electrolyte jet turning", Procedia CIRP, Cilt 42, ss. 373-378.
• Mohammed, M. K., Umer, U., Al-Ahmari, A., 2019, "Optimization of Nd: YAG laser for microchannels fabrication in alumina ceramic", Journal of Manufacturing Processes, Cilt 41, ss. 148-158.
• Natarajan, Y., Murugesan, P. K., Mohan, M., Khan, S. A. L. A., 2020, "Abrasive Water Jet Machining process: A state of art of review", Journal of Manufacturing Processes, Cilt 49, ss. 271-322.
• Navas, V. G., Sandá, A., Sanz, C., Fernández, D., Vleugels, J., Vanmeensel, K., Fernández, A., 2015, "Surface integrity of rotary ultrasonic machined ZrO2–TiN and Al2O3–TiC–SiC ceramics", Journal of the European Ceramic Society, Cilt 35, Sayı 14, ss. 3927-3941.
• Okumuş, H., 2017, "Geçmişte ve günümüzde seramiğin kullanım alanları", Journal of Awareness (JoA), Cilt 2, Sayı 3, ss. 1-14.
• Parihar, R. S., Sahu, R. K., Srinivasu, G., 2018, "Effect of wire electrical discharge machining on the functionally graded cemented tungsten carbide surface integrity", Materials Today: Proceedings, Cilt 5, Sayı 14, ss. 28164-28169.
• Parmar, M., James S., 2018, "Experimental and Modeling study of liquid-assisted—laser beam micromachining of smart ceramic materials", Journal of Manufacturing and Materials Processing, Cilt 2, Sayı 2, ss. 28-39.
• Pramanick, A., Sarkar, S., Dey, P. P., Das, P. K., 2016, "Optimization of wire electrical discharge machining parameters for cutting electrically conductive boron carbide", Ceramics International, Cilt 42, Sayı 14, ss. 15671-15678.
• Prasanna, P., Sashank, T. V. S. S. P., Manikanta, B., Aluri, P., 2017, "Optimizing the process parameters of electrical discharge machining on AA7075-SiC alloys", Materials Today: Proceedings, Cilt 4, Sayı 8, ss. 8517-8527.
• Praveen, D. V., Raju, D. R., Raju, M. V. J., 2020, "Optimization of machining parameters of wire-cut EDM on ceramic particles reinforced Al-metal matrix composites–A review", Materials Today: Proceedings, Cilt 23, ss. 495-498.
• Rakshit, R., Das, A. K., 2019, "A review on cutting of industrial ceramic materials", Precision Engineering, Cilt 59, ss. 90-109.
• Rao, R. V., Kalyankar V., 2014, "Optimization of modern machining processes using advanced optimization techniques: a review", The International Journal of Advanced Manufacturing Technology, Cilt 73, Sayı 5, ss. 1159-1188.
• Rona, N., Yenisey, M., Kucukturk, G., Gurun, H., Cogun, C., Esen, Z., 2017, "Effect of electrical discharge machining on dental Y-TZP ceramic-resin bonding", Journal of prosthodontic research, Cilt 61, Sayı 2, ss. 158-167.
• Samanta, S., Chakraborty S., 2011, "Parametric optimization of some non-traditional machining processes using artificial bee colony algorithm", Engineering Applications of Artificial Intelligence, Cilt 24, Sayı 6, ss. 946-957.
• Saravanan, S., Balan, A. V., Dinesh, S., Vijayan, V., 2020, "Electrochemical machining behaviour of AA6063-TiC composites by using response surface methodology", Materials Today: Proceedings, Cilt 21, ss. 592-594.
• Sayar, İ., 2017, “Seramik Tarihçe & Teknoloji & Uygulama”, 1. Baskı, Gazi Kitapevi, Ankara, Türkiye. Schüler, M., Herrig, T., Bergs T., 2022, “A Study on Abrasive Waterjet Multi-Stage Machining of Ceramics”, Procedia CIRP, Cilt 108, Sayı 6, ss. 770–775.
• Selvarajan, L., Rajavel, R., Prakash, B., Mohan, D. G., Gopi, S., 2020, "Investigation on spark electrical discharge machining of Si3N4 based advanced conductive ceramic composites", Materials Today: Proceedings, Cilt 27, ss. 2174-2178.
• Shaikh, J. H., Jain, N. K., 2014, "Modeling of material removal rate and surface roughness in finishing of bevel gears by electrochemical honing process", Journal of Materials Processing Technology, Cilt 214, Sayı 2, ss. 200-209.
• Shanbhog, N., Arunachalam N., Bakshi S R., 2022, “Surface Integrity Studies on ZrB2 and Graphene Reinforced ZrB2 Ceramic Matrix Composite in EDM Process”, CIRP Journal of Manufacturing Science and Technology, Cilt 38, ss. 401–413.
• Shibin, R., Anandakrishnan, V., Sathish, S., Sujana, V. M., 2020, "Investigation on the abrasive water jet machinability of AA2014 using SiC as abrasive", Materials Today: Proceedings, Cilt 21, ss. 519-522.
• Singh, R. P., Kataria, R., Kumar, J., Verma, K., Chaudhary, B., Singh, S., 2020, "Investigation of Process Responses in Rotary Ultrasonic Machining of Al/SiC Composite Through Designed Experiments", Materials Today: Proceedings, Cilt 21, ss. 2043-2052.
• Srikanth, D., Rao M. S., 2015, "Application of Taguchi & response surface methodology in optimization for machining of ceramics with abrasive jet machining", Materials Today: Proceedings, Cilt 2, Sayı 4-5, 3308-3317.
• Swift, K., Booker J., 2013, Manufacturing process selection handbook, Butterworth-Heinemann, Waltham, Massachusetts, USA.
• Wang, J., Feng, P., Zhang, J., Guo, P., 2018a, "Experimental study on vibration stability in rotary ultrasonic machining of ceramic matrix composites: cutting force variation at hole entrance," Ceramics International, Cilt 44, Sayı 12, ss. 14386-14392.
• Wang, J., Zhang, J., Feng, P., Guo, P., 2018b, "Damage formation and suppression in rotary ultrasonic machining of hard and brittle materials: a critical review", Ceramics International, Cilt 44, Sayı 2, ss. 1227-1239.
• Wang, L., Huang, C., Wang, J., Zhu, H., Liang, X., 2018c, "An experimental investigation on laser assisted waterjet micro-milling of silicon nitride ceramics", Ceramics International, Cilt 44, Sayı 5, ss. 5636-5645.
• Wang, M., Zhao, G., He, N., Ma, L., Li, L., 2019, "Study on oxidation behavior of spark plasma sintered TiB2SiC ceramic under laser irradiation", Ceramics International, Cilt 45, Sayı 7, ss. 8477-8485.
• Xing, Y., Liu, L., Wu, Z., Wang, X., Huang, P., Tang, L., 2018, "Fabrication and characterization of micro-channels on Al2O3/TiC ceramic produced by nanosecond laser", Ceramics International, Cilt 44, Sayı 18, ss. 23035-23044.
• Xue, F., Zheng, K., Liao, W., Shu, J., Miao, D., 2021, "Experimental investigation on fatigue property at room temperature of C/SiC composites machined by rotary ultrasonic milling", Journal of the European Ceramic Society, Cilt 41, Sayı 6, ss. 3341-3356.
• Yu, T., Zhang, Z., Liu, Q., Kuliiev, R., Orlovskaya, N., Wu, D., 2020, "Extrusion-based additive manufacturing of yttria-partially-stabilized zirconia ceramics", Ceramics International, Cilt 46, Sayı 4, ss. 5020-5027.
• Zhang, C., Liang, Y., Cui, Z., Meng, F., Zhao, J., Yu, T., 2022a, “Study on the Effect of Ultrasonic Vibration-Assisted Polishing on the Surface Properties of Alumina Ceramic”, Ceramics International, Cilt 48, ss. 21389–21406.
• Zhang, L., Huang, Z., Liu, Y., Shen, Y., Li, K., Cao, Z., ..., Jian, Y., 2019, "Effect of Ni content on the microstructure, mechanical properties and erosive wear of Mo2NiB2–Ni cermets", Ceramics International, Cilt 45, Sayı 16, ss. 19695-19703.
• Zhang, M., Pang, Z., Jia, Y., Shan, C., 2022b, “Understanding the Machining Characteristic of Plain Weave Ceramic Matrix Composite in Ultrasonic-Assisted Grinding”, Ceramics International, Cilt 48 Sayı 4, ss. 5557–5573.
• Zhang, Y., Liu, D., Zhang, W., Zhu, H., Huang, C., 2022c, “Hole Characteristics and Surface Damage Formation Mechanisms of Cf/SiC Composites Machined by Abrasive Waterjet”, Ceramics International, Cilt 48, Sayı 4, ss. 5488–5498.
• Zhao, J., Wong, K. S., Shrotriya, P., 2017, "Hybrid CO2 laser waterjet heat (LWH) treatment of bindered boron nitride composites with hardness improvement", Ceramics International, Cilt 43, Sayı 11, ss. 8031-8039.
• Zhou, C., Wu, X., Lu, Y., Wu, W., Zhao, H., Li, L., 2018, "Fabrication of hydrophobic Ti3SiC2 surface with micro-grooved structures by wire electrical discharge machining", Ceramics International, Cilt 44, Sayı 15, ss. 18227-18234.