A NOVEL APPROACH FOR ANALYTICAL MODEL OF METAL-METAL FUNCTIONALLY GRADED CIRCULAR BEAM

Abstract

Functionally graded materials are advanced inhomogeneous materials in which element gradation changes continuously and smoothly from one phase to the other. The purpose of this study is to derive a novel and flexible model for metal-metal functionally graded circular beams. By means of this novel model, it is possible to determine the displacements numerically under all kinds of loading as well as to perform both elastic and plastic stress analysis. The mathematical formulation is derived through higher-order shear deformation theory. For this purpose, macro-mechanical model of functionally graded circular beam is constructed initially. Then, kinematic relations of functionally graded circular beam are derived. Based on Hamilton's principle, a system of differential equations governing the static behavior of a functionally graded circular beam is derived. Numerical results are presented after exact solutions are obtained. The advantage of this novel model is that it is possible to define not only linear gradation but also parabolic gradation from center to the surface of the beam.

Keywords

• Analytical Model
• Circular Beam
• Flexure
• Functionally Graded Material (FGM)
• Higher-Order Shear Deformation Theory

Ethical Statement

The author declares to comply with all ethical guidelines, including authorship, citation, data reporting and publishing original research.

References

1. A. Tounsi et al., "A four variable trigonometric integral plate theory for hygro-thermo-mechanical bending analysis of AFG ceramic-metal plates resting on a two-parameter elastic foundation," Steel and Composite Structures, vol. 34, no. 4, pp. 511-524, 2020.
2. H. Yin, L. Sun, and G. H. Paulino, "Micromechanics-based elastic model for functionally graded materials with particle interactions," Acta Materialia, vol. 52, no. 12, pp. 3535-3543, 2004.
3. Ö. Özdemir, “Vibration analysis of rotating Timoshenko beams with different material distribution properties,” Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi (SUJEST), c. 7, sy. 2, ss. 272–286, 2019.
4. M. H. Saraçoğlu et al., "Deflection analysis of functionally graded equal strength beams," European Mechanical Science, vol. 6, no. 2, pp. 119-128, 2022.
5. A. Bouamoud, B. Boucham, F. Bourada, M. S. A. Houari, and A. Tounsi, "Thermomechanical bending investigation of FGM sandwich plates using four shear deformation plate theory," Steel and Composite Structures, vol. 32, no. 5, pp. 611-632, 2019.
6. B. Bouderba and H. M. Berrabah, "Bending response of porous advanced composite plates under thermomechanical loads," Mechanics Based Design of Structures and Machines, vol. 50, no. 9, pp. 3262-3282, 2022.
7. A. Ozturk and M. Gulgec, "Analytical solution of thermal stresses in a functionally graded solid cylinder within parabolic continuous grading," Applied Mechanics and Materials, vol. 307, pp. 364-367, 2013.
8. F. Bourada et al., "Dynamic investigation of porous functionally graded beam using a sinusoidal shear deformation theory," Wind and Structures, vol. 28, no. 1, pp. 19-30, 2019.

9. F. Allahkarami, H. Tohidi, R. Dimitri, and F. Tornabene, "Dynamic stability of bi-directional functionally graded porous cylindrical shells embedded in an elastic foundation," Applied Sciences, vol. 10, no. 4, p. 1345, 2020.
10. O. Allam et al., "A generalized 4-unknown refined theory for bending and free vibration analysis of laminated composite and sandwich plates and shells," Computers and Concrete, vol. 26, no. 2, pp. 185-201, 2020.
11. A. Ozturk, "Overall heat transfer coefficient of functionally graded hollow cylinder," Solid State Phenomena, vol. 267, pp. 177-181, 2017.
12. R. Benferhat, T. H. Daouadji, and B. Adim, "A novel higher order shear deformation theory based on the neutral surface concept of FGM plate under transverse load," Advances in Materials Research, vol. 5, no. 2, p. 107, 2016.
13. A. Chikh et al., "Thermo-mechanical postbuckling of symmetric S-FGM plates resting on Pasternak elastic foundations using hyperbolic shear deformation theory," Structural Engineering and Mechanics, vol. 57, no. 4, pp. 617-639, 2016.
14. A. Chikh et al., "Thermal buckling analysis of cross-ply laminated plates using a simplified HSDT," Smart Structures and Systems, vol. 19, no. 3, pp. 289-297, 2017.
15. A. Attia et al., "A refined four variable plate theory for thermoelastic analysis of FGM plates resting on variable elastic foundations," Structural Engineering and Mechanics, vol. 65, no. 4, pp. 453-464, 2018.
16. M. Yousfi et al., "Free vibration of FGM plates with porosity by a shear deformation theory with four variables," Structural Engineering and Mechanics, vol. 66, no. 3, pp. 353-368, 2018.
17. J. N. Reddy, "Microstructure-dependent couple stress theories of functionally graded beams," Journal of the Mechanics and Physics of Solids, vol. 59, no. 11, pp. 2382-2399, 2011.
18. A. Arbind and J. N. Reddy, "Nonlinear analysis of functionally graded microstructure-dependent beams," Composite Structures, vol. 98, pp. 272-281, 2013.
19. E. Madenci and Ş. Gülcü, "Optimization of flexure stiffness of FGM beams via artificial neural networks by mixed FEM," Structural Engineering and Mechanics, vol. 75, no. 5, pp. 633-642, 2020.
20. E. Madenci, "A refined functional and mixed formulation to static analysis of FGM beams," Structural Engineering and Mechanics, vol. 69, no. 4, pp. 427-433, 2019.
21. M. M. Gasik, "Micromechanical modelling of functionally graded materials," Computational Materials Science, vol. 13, no. 1, pp. 42-55, 1998.
22. J. R. Zuiker, "Functionally graded materials: choice of micromechanics model and limitations in property variation," Composites Engineering, vol. 5, no. 7, pp. 807-819, 1995.
23. H. S. Shen and Z. X. Wang, "Assessment of Voigt and Mori–Tanaka models for vibration analysis of functionally graded plates," Composite Structures, vol. 94, no. 7, pp. 2197-2208, 2012.
24. E. Madenci, Y. O. Özkılıç, and L. Gemi, "Buckling and free vibration analyses of pultruded GFRP laminated composites: Experimental, numerical and analytical investigations," Composite Structures, vol. 254, p. 112806, 2020.
25. T. H. Daouadj and B. Adim, "Mechanical behaviour of FGM sandwich plates using a quasi-3D higher order shear and normal deformation theory," Structural Engineering and Mechanics, vol. 61, no. 1, pp. 49-63, 2017.
26. E. Moshkelgosha et al., "Fluid-structure coupling of concentric double FGM shells with different lengths," arXiv preprint arXiv:1905.00879, 2019.
27. M. Lee, I. Park, and U. Lee, "An approximate spectral element model for the dynamic analysis of an FGM bar in axial vibration," Structural Engineering and Mechanics, vol. 61, no. 4, pp. 551-561, 2017.
28. A. Heydari and M. Shariati, "Buckling analysis of tapered BDFGM nano-beam under variable axial compression resting on elastic medium," Structural Engineering and Mechanics, vol. 66, no. 6, pp. 737-748, 2018.
29. G. L. She et al., "Study on thermal buckling and post-buckling behaviors of FGM tubes resting on elastic foundations," Structural Engineering and Mechanics, vol. 66, no. 6, pp. 729-736, 2018.
30. B. Hadj, B. Rabia, and T. H. Daouadji, "Influence of the distribution shape of porosity on the bending FGM new plate model resting on elastic foundations," Structural Engineering and Mechanics, vol. 72, no. 1, pp. 61-70, 2019.
31. Y. Tlidji, R. Benferhat, and H. D. Tahar, "Study and analysis of the free vibration for FGM microbeam containing various distribution shape of porosity," Structural Engineering and Mechanics, vol. 77, no. 2, pp. 217-229, 2021.
32. M. A. Attia and R. M. Abo-Bakr, "A semi-analytical study on the nonlinear pull-in instability of FGM nanoactuators," Structural Engineering and Mechanics, vol. 76, no. 4, pp. 451-463, 2020.
33. A. H. Akbarzadeh, A. Abedini, and Z. T. Chen, "Effect of micromechanical models on structural responses of functionally graded plates," Composite Structures, vol. 119, pp. 598-609, 2015.
34. M. Ghannad and H. Gharooni, "Displacements and stresses in pressurized thick FGM cylinders with exponentially varying properties based on FSDT," Structural Engineering and Mechanics, vol. 51, no. 6, pp. 939-953, 2014.
35. Y. Chen, "Transfer matrix method for solution of FGMs thick-walled cylinder with arbitrary inhomogeneous elastic response," Smart Structures and Systems, vol. 21, no. 4, pp. 469-477, 2018.
36. C. Sachdeva and S. S. Padhee, "Functionally graded cylinders: Asymptotically exact analytical formulations," Applied Mathematical Modelling, vol. 54, pp. 782-802, 2018.
37. R. Nedin, S. Nesterov, and A. Vatulyan, "On reconstruction of thermalphysic characteristics of functionally graded hollow cylinder," Applied Mathematical Modelling, vol. 40, no. 4, pp. 2711-2719, 2016.
38. B. L. Wang and Y. W. Mai, "Transient one-dimensional heat conduction problems solved by finite element," International Journal of Mechanical Sciences, vol. 47, no. 2, pp. 303-317, 2005.
39. Z. S. Shao, "Mechanical and thermal stresses of a functionally graded circular hollow cylinder with finite length," International Journal of Pressure Vessels and Piping, vol. 82, no. 3, pp. 155-163, 2005.
40. A. Ozturk and M. Gulgec, "Elastic–plastic stress analysis in a long functionally graded solid cylinder with fixed ends subjected to uniform heat generation," International Journal of Engineering Science, vol. 49, no. 10, pp. 1047-1061, 2011.
41. E. Reissner, "Reflections on the theory of elastic plates," Applied Mechanics Reviews, vol. 38, no. 11, pp. 1453-1464, 1985.
42. J. N. Reddy, "A simple higher-order theory for laminated composite plates," Journal of Applied Mechanics, vol. 51, no. 4, pp. 745-752, 1984.
43. K. Pradhan and S. Chakraverty, "Effects of different shear deformation theories on free vibration of functionally graded beams," International Journal of Mechanical Sciences, vol. 82, pp. 149-160, 2014.
44. J. N. Reddy, Energy Principles and Variational Methods in Applied Mechanics, 3rd ed., John Wiley & Sons, 2017.
45. J. Reddy, C. Wang, and K. Lee, "Relationships between bending solutions of classical and shear deformation beam theories," International Journal of Solids and Structures, vol. 34, no. 26, pp. 3373-3384, 1997.