The aim of this study was in vitro evaluation and comparison of
pH levels and surface tension of calcium hydroxide [Ca(OH)2]
paste prepared with different vehicles such as distilled water,
citanest, glycerin, and procaine.
Forty extracted human maxillary incisors were used for pH
analysis in the study. Teeth were randomly divided into 4 groups as
follows: Group I: Ca(OH)2 and distilled water paste; Group II:
Ca(OH)2 and glycerin paste; Group III: Ca(OH)2 and citanest paste
and Group IV: Ca(OH)2 and procaine paste. In all groups, pH
measurements were performed at the 15th, 30th and 45th minutes;
2nd, 24th and 48th hours, and 7th and 14th days.
The powder of Ca(OH)2 and liquids were mixed to the weight ratio
3:2 (3 ml liquid and 2 g powder) for the surface tension
measurements. The surface tension of Ca(OH)2 mixtures was
measured using a tensiometer device. All measurements were
repeated five times for each sample and by arithmetic means were
calculated. The data were recorded and statistical analysis was
performed with a significance level set at p<0.05.
The combination of Ca(OH)2 with procaine resulted in significantly
higher pH values compared to the other pastes. Distilled water
mixed with Ca(OH)2 represented the highest surface tension
values (77,5 dynes/cm). The mixture of procaine or citanest with
Ca(OH)2 powder presented the lowest surface tension values of all
the groups (61,6 and 56,1 respectively).
Considering the pH values obtained in this study, procaine might
be used as a vehicle for Ca(OH)2 powder. Citanest, with the lowest surface tension values, seems to be the most favorable vehicle for
Ca(OH)2.
-
Birincil Dil | İngilizce |
---|---|
Bölüm | Makaleler |
Yazarlar | |
Yayımlanma Tarihi | 19 Aralık 2014 |
Yayımlandığı Sayı | Yıl 2013 Cilt: 1 Sayı: 2 |