Evaluation of Polymethylmethacrylate (PMMA) Cement for Stabilizing Loosened Screws in Mandibular Angle Fracture Fixation: A Biomechanical Study

Yıl 2025, Cilt: 7 Sayı: 1, 173 - 177, 15.01.2025

Metin Berk Kasapoğlu , Betül Gedik , Gözde Gökçe , Gülce Ecem Doğancalı , Abdulkadir Burak Çankaya , Mehmet Ali Erdem

https://doi.org/10.37990/medr.1589459

Öz

Aim: Mandibular angle fractures account for 23-42% of all mandibular fractures, with treatment options often debated due to the region's anatomical complexity. While single miniplate fixation has shown low complication rates, issues like screw loosening remain a challenge. Polymethylmethacrylate (PMMA) has been widely used in orthopedic surgery to improve screw stability. This study aimed to evaluate the effect of PMMA on the stability of loosened screws in mandibular angle fractures.
Material and Method: Twenty hemimandibles from sheep cadavers were divided into control and experimental groups. In the control group, standard 2.0 mm screws were inserted without PMMA augmentation. In the experimental group, a 1.6 mm pilot hole was used to simulate screw loosening, and PMMA was injected into the screw tracts before screw insertion. Both groups underwent vertical force testing using a hydraulic device, with displacement values measured at 50 N of force. Statistical analysis was performed using the Student t-test, with significance set at p<0.05.
Results: The mean maximum displacement in the control group was 5.60±2.22 mm, while in the experimental group it was 6.49±3.21 mm. There was no statistically significant difference between the two groups (p=0.479). The biomechanical behavior of both groups was similar, indicating that PMMA did not significantly affect displacement values under the tested conditions.
Conclusion: PMMA cement did not significantly improve the stability of loosened screws in mandibular angle fractures. Further research with different force applications and screw conditions may provide more insights into the potential benefits of PMMA augmentation.

Anahtar Kelimeler

Mandibular angle fractures, polymethylmethacrylate, screw loosening, miniplate fixation, biomechanical stability

Kaynakça

• Braasch DC, Abubaker AO. Management of mandibular angle fractures. Oral Maxillofac Surg Clin North Am. 2013;25:591-600.
• Wittenberg JM, Mukherjee DP, Smith BR, Kruse RN. Biomechanical evaluation of new fixation devices for mandibular angle fractures. Int J Oral Maxillofac Surg. 1997;26:68-73.
• Paza AO, Abuabara A, Passeri LA. Analysis of 115 mandibular angle fractures. J Oral Maxillofac Surg. 2008;66:73-6.
• James RB, Fredrickson C, Kent JN. Prospective study of mandibular fractures. J Oral Surg. 1981;39:275-81.
• Ellis E 3rd. Treatment methods for fractures of the mandibular angle. Int J Oral Maxillofac Surg. 1999;28:243-52.
• Champy M, Lodd JP, Schmitt R, et al. Mandibular osteosynthesis by miniature screwed plates via a buccal approach. J Maxillofac Surg. 1978;6:14-21.
• Barry CP, Kearns GJ. Superior border plating technique in the management of isolated mandibular angle fractures: a retrospective study of 50 consecutive patients. J Oral Maxillofac Surg. 2007;65:1544-9.
• Poon CC, Verco S. Evaluation of fracture healing and subimplant bone response following fixation with a locking miniplate and screw system for mandibular angle fractures in a sheep model. Int J Oral Maxillofac Surg. 2013;42:736-45.
• Haug RH, Street CC, Goltz M. Does plate adaptation affect stability? A biomechanical comparison of locking and nonlocking plates. J Oral Maxillofac Surg. 2002;60:1319-26.
• Chang MC, Liu CL, Chen TH. Polymethylmethacrylate augmentation of pedicle screws for osteoporotic spinal surgery. Spine (Phila Pa 1976). 2008;33:E317-24.
• Aziz SR, Ziccardi VB, Borah G. Current therapy: complications associated with rigid internal fixation of facial fractures. Compend Contin Educ Dent. 2005;26:565-71.
• Schortinghuis J, Bos RRM, Vissink A. Complications of internal fixation of maxillofacial fractures with microplates. J Oral Maxillofac Surg. 1999;57:130-4.
• Goost H, Deborre C, Wirtz DC, et al. PMMA-augmentation of incompletely cannulated pedicle screws: a cadaver study to determine the benefits in the osteoporotic spine. Technol Health Care. 2014;22:607-15.
• Smeets R, Marx R, Kolk A, et al. In vitro study of adhesive polymethylmethacrylate bone cement bonding to cortical bone in maxillofacial surgery. J Oral Maxillofac Surg. 2010;68:3028-33.
• Linhardt O, Luring C, Matussek J, et al. Stability of pedicle screws after kyphoplasty augmentation: an experimental study to compare transpedicular screw fixation in soft and cured kyphoplasty cement. J Spinal Disord Tech. 2006;19:87-91.
• Kayanja M, Evans K, Milks R, et al. The mechanics of polymethylmethacrylate augmentation. Clin Orthop Relat Res. 2006;443:124-30.
• Girardo M, Cinelle P, Gargiulo G, et al. Surgical treatment of osteoporotic thoraco-lumbar compressive fractures: the use of pedicle screw with augmentation PMMA. Eur Spine J. 2017;26:546-51.
• Cankaya AB, Kasapoglu MB, Erdem MA, Kasapoglu C. Effects of polymethylmethacrylate on the stability of screw fixation in mandibular angle fractures: a study on sheep mandibles. Int J Med Sci. 2018;15:1466-71.
• Tate GS, Ellis E 3rd, Throckmorton G. Bite forces in patients treated for mandibular angle fractures: implications for fixation recommendations. J Oral Maxillofac Surg. 1994;52:734-6.
• Kimsal J, Baack B, Candelaria L, et al. Biomechanical analysis of mandibular angle fractures. J Oral Maxillofac Surg. 2011;69:3010-4.
• Champy M, Gerlach KL, Schwarz A. Bite forces in patients after treatment of mandibular angle fractures with miniplate osteosynthesis according to Champy. Int J Oral Maxillofac Surg. 2002;31:345-8.
• Pektas ZO, Bayram B, Balcık C, et al. Effects of different mandibular fracture patterns on the stability of miniplate screw fixation in angle mandibular fractures. Int J Oral Maxillofac Surg. 2012;41:339-43.
• Oguz Y, Saglam H, Dolanmaz D, Uckan S. Comparison of stability of 2.0 mm standard and 2.0 mm locking miniplate/screws for the fixation of sagittal split ramus osteotomy on sheep mandibles. Br J Oral Maxillofac Surg. 2011;49:135-7.
• Heidemann W, Gerlach KL, Grobel KH, Kollner HG. Influence of different pilot hole sizes on torque measurements and pullout analysis of osteosynthesis screws. J Craniomaxillofac Surg. 1998;26:50-5.
• Wittenberg RH, Lee KS, Shea M, et al. Effect of screw diameter, insertion technique, and bone cement augmentation on pedicular screw fixation strength. Clin Orthop Relat Res. 1993;296:278-87.
• Polly DW, Orchowski JR, Ellenborgen RG. Revision pedicle screws: bigger, longer shims—what is the best?. Spine. 1998;12:1374-9.
• Hirano T, Hasegawa K, Wasio T, et al. Fracture risk during pedicle screw insertion in osteoporotic spine. J Spinal Disord. 1998;11:493-7.
• Renner SM, Lim TH, Kim WJ, et al. Augmentation of pedicle screw fixation strength using an injectable calcium phosphate cement as a function of injection timing and method. Spine (Phila Pa 1976). 2004;29:E212-6.
• Sandén B, Olerud C, Johansson C, Larsson S. Improved bone-screw interface with hydroxyapatite coating: an in vivo study of loaded pedicle screws in sheep. Spine (Phila Pa 1976). 2001;26:2673-8.
• Frankel BM, D'Agostino S, et al. A biomechanical cadaveric analysis of polymethylmethacrylate-augmented pedicle screw fixation. J Neurosurg Spine. 2007;7:47-53.
• Yuan Q, Zhang G, Wu J, et al. Clinical evaluation of the polymethylmethacrylate-augmented thoracic and lumbar pedicle screw fixation guided by three-dimensional navigation for osteoporosis patients. Eur Spine J. 2015;24:1043-50.
• Bereczki F, Turbucz M, Pokorni AJ, et al. The effect of polymethylmethacrylate augmentation on the primary stability of stand-alone implant construct versus posterior stabilization in oblique lumbar interbody fusion with osteoporotic bone quality- a finite element study. Spine J. 2024;24:1323-33.
• Hsieh MK, Li YD, Li YC, et al. Improved fixation stability for repairing pedicle screw loosening using a modified cement filling technique in porcine vertebrae. Sci Rep. 2022;12:2739.