MT Bilimsel 2146-9431 Mayeb Basın Yayın İnsan Kaynakları Ltd. Şti. Geological Sciences and Engineering (Other) Yer Bilimleri ve Jeoloji Mühendisliği (Diğer) Negatif Açılı Bir Kama Tipi Keskiden Elde Edilen Deneysel Sonuçların Teorik Sonuçlarla Kıyaslanması Yaşar Serdar Yılmaz Ali Osman 02 16 2018 13 13 13 22 11 16 2017 12 07 2017 Copyright © 2012, MT Bilimsel 2012 MT Bilimsel

Bu çalışmada altı farklı kayaç numunesi negatif açılı(-5°) bir kama tipi keski ile kaya kesme deneyine tabi tutulmuştur. Bu deneydenelde edilen sonuçlar, basit kama tipi keskiler için geliştirilmiş olan Evans veNishimatsu modellerinden elde edilen teorik kesme kuvveti ilekarşılaştırılmıştır. Eşitliklere dahil edilen sürtünme açılarının etkileriayrıca incelenmiştir. Sonuç olarak sürtünme açısı hesaplamalara dahiledildiğinde Nishimatsu modelinin gerçeğe daha yakın sonuçlar verdiğigörülmüştür.

 Kazı Barker, J.S., 1964. A Laboratory Investigation of Rock Cutting Using Large Picks. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 1, 519–534. Bilgin, N., 1989. İnşaat ve Maden Mühendisleri İçin Uygulamalı Kazı Mekaniği, Birsen Yayınevi, Istanbul, 192 s. Bilgin, N., Demircin, M.A., Çopur, H., Balcı, C., Tunçdemir, H., Akçin, N., 2006. Dominant Rock Properties Affecting the Performance of Conical Picks and the Comparison of Some Experimental and Theoretical Results, International Journal of Rock Mechanics and Mining Science, 43, 1, 139–156. Bilgin, N., Copur, H., Balci, C., 2014. Mechanical Excavation in Mining and Civil Industries, CRC Press, 366 s. Evans, I., 1958. Theoretical Aspects of Coal Ploughing, Mechanical Properties of Non-Metallic Brittle Materials, W.H. Walton, Ed., Butterworths, London, 451–468. Evans, I., 1965. The Force Required to Cut Coal with Blunt Wedges. International Journal of Rock Mechanics and Mining Science & Geomechanics Abstracts, 2, 1–12. Göktan, R.M., 1990. Effect of Cutter Pick Rake Angle on the Failure Pattern of High-Strength Rocks, Mining Science and Technology, 11, 281–285. ISRM, 1981. Rock Caharacterization, Testing and Monitoring: ISRM suggested Methods. E.T. Brown, Ed., Pergamon Press, 211 s. Mellor, M., 1977. Mechanics of Cutting and Borin: Part IV: Dynamics and Energetics of Parallel Motion Tools, CRREL Report 77-7, 96 s. Menezes, P.L., Lovell, M.R, Avdeev, I.V., Lin, J.S., Higgs III, C.F., 2014. Studies on the Formation of Discontinuous Chips During Rock Cutting Using an Explicit Finite Element Model, International Journal of Advanced Manufacturing Technology, 70, 635-648. Nishimatsu, Y., 1972. The Mechanics of Rock Cutting, International Journal of Rock Mechanics and Mining Science, 9, 261-270. Nishimatsu, Y., 1993. Theories of Rock Cutting, Comprehensive Rock Engineering, J.A. Hudson, Ed., Oxford, Pergamon Press, 647-662. Perras, M.A. ve Diederichs, M.S., 2014. A Review of the Tensile Strength of Rock: Concepts and Testing, Geotechnical and Geological Engineering, 32, 525-546. Rostami, J., Ozdemir, L., Nilson, B., 1996. Comparison between CSM and NTH hard rock TBM performance prediction models. In Proceeding of the Annual Conference the Institution of Shaft Drilling Technology, Las Vegas, pp. 1 Roxborough, F.F., 1973. The Cutting Rock with Picks, Mining Engineer, June, 445-454. Yaşar, S., 2017. Kayaç kesilebilirliğinin tayini için düşey kayaç kesme setinin geliştirilmesi, Doktora Tezi, Karadeniz Teknik Üniversitesi. Yaşar, S. ve Yılmaz, A.O., 2017a. A Novel Mobile Testing Equipment for Rock Cuttability Assessment: Vertical Rock Cutting Rig (VRCR), Rock Mechanics and Rock Engineering, 50, 857-869. Yaşar, S. ve Yılmaz, A.O., 2017b. Vertical rock cutting rig (VRCR) suggested for performance prediction of roadheaders, International Journal of Mining, Reclamation and Environment, DOI: 10.1080/17480930.2017.1363482. Yaşar, S. ve Yılmaz, A.O., 2017c. Rock Cutting Tests with a Simple-Shaped Chisel Pick to Provide Some Useful Data, Rock Mechanics and Rock Engineering, DOI: 10.1007/s00603-017-1303-2. Wang, X., Liang, Y., Wang, Q., Zhang, Z., 2017. Empirical Models for Tool Forces Prediction of Drag-Typed Picks Based on Principal Component Regression and Ridge Regression Methods, Tunnelling and Underground Space Technology, 62, 75-92.