BibTex RIS Kaynak Göster
Yıl 2016, Cilt: 19 Sayı: 4, 623 - 631, 01.12.2016

Öz

Short Review on Laser Texturing and Cleaning Carbon Fibre Composites for Aerospace Applications

Yıl 2016, Cilt: 19 Sayı: 4, 623 - 631, 01.12.2016

Öz

Carbon fibre reinforced polymer composites are increasingly being used in aircrafts especially for wing and tail components and automotive applications. Surface wettability of these thermoplastic composites is poor due to low surface energies causing difficulty in the surface painting process where necessary. To achieve durable painting the composite surface needs pre- treatment to modify the surface wettability, to remove surface contaminants, and loose, friable surfaces for better paint adhesion. Conventional surface treatments such as sand blasting, mechanical abrasion and chemical etching may cause delamination defects and damage to the brittle fibers affecting service life of the bulk composite. These methods also present occupational health, safety and environmental risks. This article reviewed texturing and cleaning of polymer, composites and metallic surfaces for enhancing adhesion performance in general and, in particular, the laser texturing and cleaning which is a potential substitute to conventional surface modification techniques of composites

Toplam 0 adet kaynakça vardır.

Ayrıntılar

Diğer ID JA44BG64CA
Bölüm Araştırma Makalesi
Yazarlar

Hüseyin Kürşad Sezer Bu kişi benim

Yayımlanma Tarihi 1 Aralık 2016
Gönderilme Tarihi 1 Aralık 2016
Yayımlandığı Sayı Yıl 2016 Cilt: 19 Sayı: 4

Kaynak Göster

APA Sezer, H. K. (2016). Short Review on Laser Texturing and Cleaning Carbon Fibre Composites for Aerospace Applications. Politeknik Dergisi, 19(4), 623-631.
AMA Sezer HK. Short Review on Laser Texturing and Cleaning Carbon Fibre Composites for Aerospace Applications. Politeknik Dergisi. Aralık 2016;19(4):623-631.
Chicago Sezer, Hüseyin Kürşad. “Short Review on Laser Texturing and Cleaning Carbon Fibre Composites for Aerospace Applications”. Politeknik Dergisi 19, sy. 4 (Aralık 2016): 623-31.
EndNote Sezer HK (01 Aralık 2016) Short Review on Laser Texturing and Cleaning Carbon Fibre Composites for Aerospace Applications. Politeknik Dergisi 19 4 623–631.
IEEE H. K. Sezer, “Short Review on Laser Texturing and Cleaning Carbon Fibre Composites for Aerospace Applications”, Politeknik Dergisi, c. 19, sy. 4, ss. 623–631, 2016.
ISNAD Sezer, Hüseyin Kürşad. “Short Review on Laser Texturing and Cleaning Carbon Fibre Composites for Aerospace Applications”. Politeknik Dergisi 19/4 (Aralık 2016), 623-631.
JAMA Sezer HK. Short Review on Laser Texturing and Cleaning Carbon Fibre Composites for Aerospace Applications. Politeknik Dergisi. 2016;19:623–631.
MLA Sezer, Hüseyin Kürşad. “Short Review on Laser Texturing and Cleaning Carbon Fibre Composites for Aerospace Applications”. Politeknik Dergisi, c. 19, sy. 4, 2016, ss. 623-31.
Vancouver Sezer HK. Short Review on Laser Texturing and Cleaning Carbon Fibre Composites for Aerospace Applications. Politeknik Dergisi. 2016;19(4):623-31.
 
TARANDIĞIMIZ DİZİNLER (ABSTRACTING / INDEXING)
181341319013191 13189 13187 13188 18016 

download Bu eser Creative Commons Atıf-AynıLisanslaPaylaş 4.0 Uluslararası ile lisanslanmıştır.