STATISTICAL MODELLING OF THE ADSORPTIVE DEPHENOLATION OF PETROLEUM INDUSTRY WASTEWATER USING IONIC LIQUID TREATED CLAY

Year 2020, Volume: 38 Issue: 3, 1099 - 1112, 05.10.2021

Matthew N. Abonyı Chukwunonso O. Anıagor Matthew Chukwudi Menkıtı

Abstract

In this paper, response surface methodology (RSM) was employed in modelling and optimizing the adsorption characteristics of phenol unto ionic liquid-based hybrid clay (IL-C). The effect of adsorbent dosage, contact time, effluent temperature and effluent pH as independent variables were studied; while removal efficiency was considered as the response variable. Second-order polynomial regression model successfully elucidated the effect of the independent variables on the dephenolation process. A coefficient of determination (R2) value of 0.98, model F-value of 83.52, P-value (< 0.0001) and low value of the coefficient of variation (0.81%) corroborates the suitability of second-order polynomial regression model. Furthermore, the optimization result showed that the optimum operating conditions for realizing the maximum removal efficiency (91.67 %) were; 25 min, 40 0C, pH 6.6 and 1.5g adsorbent mass.

Keywords

Adsorption, dephenolation, response surface methodology, ionic liquid, clay, statistical modelling

References

• [1] WHO (1994). IPCS Environmental health criteria for phenol first draft prepared by Montizan GK, Published by WHO. Printed in Finland.
• [2] Shrivastava, V.C., Swamy, M.S., Mall, I.D., Prasad, B., & Mishra, I.M. (2006). Adsorptive removal of phenol by bagasse fly ash and activated carbon: equilibrium, kinetics and thermodynamics. Colloid Surf. A., 272, 89–104.
• [3] Ahmaruzzaman, M. (2008). Adsorption of phenolic compounds on low-cost adsorbents: a review, Adv. Colloid Interface Sci., 143(1), 48-67.
• [4] Sunil, J., Kulkarni., D., & Jayant, P.K. (2013). Review on research for removal of phenol from wastewater. International Journal of Scientific and Research Publications, 3, (4).
• [5] Song, X., Zhang, Y., Yan, C., Jiang, W., & Chang, C. (2013). The Langmuir monolayer adsorption model of organic matter into effective pores in activated carbon. Journal of Colloid and Interface Sci., 389(1), 213–219.
• [6] Kadhimand, F., & Al-Seroury F.A. (2012). Characterization the removal of phenol from aqueous solution in fluidized bed column by rice husk adsorbent, Research Journal of Recent Sciences, (1), 145–151.
• [7] Menkiti, M.C., Abonyi, M.N., & Aniagor, C.O. (2018). Process equilibrium, kinetics and mechanisms of ionic-liquid induced dephenolation of petroleum effluent. Water Conserv. Sci. Eng., 3, 205–220. https ://doi.org/10.1007/s4110 1-018-0052-8.
• [8] Abonyi, M. N., Aniagor, C. O., & Menkiti, M. C. (2019). Effective Dephenolation of Effluent from Petroleum Industry Using Ionic-Liquid-Induced Hybrid Adsorbent. Arabian Journal for Science and Engineering. https://doi.org/10.1007/s13369-019-04000-8
• [9] Chatterjee, S., Kumar, A., Basu, S., & Dutta, S. (2012). Application of response surface methodology for methylene blue dye removal from aqueous solution using low-cost adsorbent. Chemical Engineering Journal, 181 – 182, 289 – 299.
• [10] Mohammad, Y.S., Shaibu-Imodagbe, E.M., Igboro, S.B., Giwa, A., & Okuofu, C.A. (2014). Modelling and Optimization for Production of Rice Husk Activated Carbon and Adsorption of Phenol. Journal of Engineering. http://dx.doi.org/10.1155/2014/278075
• [11] Wilkes, J. S., & Zaworotko, M. J. (1992). Air and water stable 1-ethyl-3-methylimidazolium based ionic liquids, J. Chem. Soc., Chem. Commun., 8(3), 965-967.
• [12] Aniagor C.O. & Menkiti M.C. (2018). Kinetics and mechanistic description of adsorptive uptake of crystal violet dye by lignified elephant grass complexed isolate. Journal of Environmental Chemical Engineering. 6, 2105–2118. https://doi.org/10.1016/j.jece.2018.01.070
• [13] Zainudin, N.F., Lee, K.T., Kamaruddin, A.H., Bhatia, S., & Mohamed, A.R. (2006). Study of adsorbent prepared from oil palm ash (OPA) for the gas desulphurisation. Separation purification technology, 97, 734-739.
• [14] Stuart, B., (2004). Infrared Spectroscopy: Fundamentals and Applications. Hoboken, New Jersey: John Wiley & Sons
• [15] Madejova, J. (2003). FTIR techniques in clay mineral studies. Vibrational Spectroscopy, 31, 1-10.
• [16] Chang, R. (2005). Physical Chemistry for the Biosciences, University Science Books, NY, USA.
• [17] Basu, J.K, Monal, D., & Pinaki, G. (2012). Chitosan-immobilized Optimization of electrocoagulation process for removal of phenol. Archives of Applied Science Research, 4(2), 1053 - 1060.
• [18] Liu, X; & Pinto, N.G. (1997). Ideal adsorbed phase model for adsorption of phenolic compounds on activated carbon. Carbon, 35(9), 1387-1397. https://doi.org/10.1016/S0008-6223(97)00092-4
• [19] Sathishkumar, M., Binupriya, A.R., Vijayaraghavan, K., & Yun, S. I. (2007). Two and three-parameter isothermal modelling for liquids-phase sorption of procion blue HB by inactive mycelia biomass of panus fulvus. Journal of chemical technology and biotechnology, 82, 389-398.
• [20] Bayraktar, E. (2001). Response surface optimization of the separation of DL-tryptophan using an emulsion liquid membrane. Process Biochem., 37, 169–175.
• [21] Dorra, T., Soumaya, H., Islem, L., & Bachir, H. (2017). Response surface methodology for optimization of phenol adsorption by activated carbon: Isotherm and kinetics study. Indian journal of chemical technology, 24, 239-255.
• [22] Chandana, L.M., Sridevi, V., Narasimha, R.M., & Swamy, A. (2011). Optimization of phenol degradation from pseudomonas aeruginosa (ncim 2074) using response surface methodology. International Journal of research in pharmacy and chemistry. 1(4).
• [23] Ray, S., Lalman, J.A., & Biswas, N. (2009). Using the Box-Benkhen technique to statistically model phenol photocatalytic degradation by titanium dioxide nanoparticles. Chemical Engineering Journal, 150, 15–24.
• [24] Noordin, M.Y., Venkatesh, V.C., Sharif, S., Elting, S., & Abdullah, A. (2004). Application of response surface methodology in describing the performance of coated carbide tools when turning AISI 1045 steel. Journal of Mater. Process Technology, 145, 46–58.