EXPERIMENTAL DESIGN FOR BENDING STRENGTH ALUMINUM HONEYCOMB STRUCTURE

Yıl 2016, Cilt: 34 Sayı: 4, 555 - 561, 01.12.2016

Harun Akkuş Hayrettin Düzcükoğlu Ömer Sinan Şahin

Öz

In this study, a Taguchi model was formed for the three point bending test behaviors of aluminum honeycomb composite structures. Effect of the three independent variables (cell width, cell height and adhesive) on the dependent variable (bending forces) was determined using mix design L16(4*1 2*2) orthogonal series. As a result of the experiments, bending force values were measured. As a result of Taguchi analysis according to 'better than most' solution approach, bending force value was concluded to be optimum with the use of 58.59 S/N ratio A1 B2 C1 level namely, primary 6.78 mm for cell width and secondary 30 mm for cell height and primary epoxy adhesive. Order of importance according to S/N answer table for force factor was ordered as cell width, cell height and adhesive. 95% was significant for the force values of the factor and levels selected in ANOVA results.

Anahtar Kelimeler

Epoxy, MWCNT, aluminum honeycomb, three point bending test, Taguchi

Kaynakça

• [1] Lu C., Zhao M., Jie L., Wang J., Gao Y., Cui X., Chen P., (2015) Stress distribution on composite honeycomb sandwich structure suffered from bending load, Procedia Engineering, 99, 405-412.
• [2] Akatay A., Bora M.Ö., Coban O., Fidan S., Tuna V., (2015) The influence of low velocity repeated impacts on residual compressive properties of honeycomb sandwich structures, Composite Structures, 125, 425-433.
• [3] Liu L., Wang H., Guan Z., (2015) Experimental and numerical study on the mechanical response of Nomex honeycomb core under transverse loading, Composite Structures, 121, 304-314.
• [4] Crupi V., Epasto G., Guglielmino E., (2012) Collapse modes in aluminium honeycomb sandwich panels under bending and impact loading, International Journal of Impact Engineering, 43, 6-15.
• [5] Nia A.A., Sadeghi M.Z., (2010) The effects of foam filling on compressive response of hexagonal cell aluminum honeycombs under axial loading-experimental study, Materials and Design, 31, 1216-1230.
• [6] Kılıcarslan C., Guden M., Odacı I.K., Tasdemirci A., (2013) The impact responses and the finite element modeling of layered trapezoidal corrugated aluminum core and aluminum sheet interlayer sandwich structures, Materials and Design, 46, 121-133.
• [7] Solmaz M.Y., Kaman M.O., Tura K., Turgut A., (2010) Investigation of Bending Behaviors of Honeycomb Sandwich Panels, Fırat Univ. Journal of Enginering, 22, 1-11.
• [8] Abbadi A., Tixier C., Gilgert J., Azari Z., (2015) Experimental study on the fatigue behaviour of honeycomb sandwich panels with artificial defects, Composite Structures, 120, 394-405.
• [9] Crupi V., Montanini R., (2007) Aluminium foam sandwiches collapse modes under static and dynamic three-point bending, International Journal of Impact Engineering, 34, 509-521.
• [10] Giglio M., Gilioli A., Manes A., (2012) Numerical investigation of a three point bending test on sandwich panels with aluminum skins and Nomex™ honeycomb core, Computational Materials Science, 56, 69-78.
• [11] Miller W., Smith C.W., Evans K.E., (2011) Honeycomb cores with enhanced buckling strength, Composite Structures, 93, 1072-1077.
• [12] Lu D.D., Li Y.G., Wong C.P., (2008) Recent advances in nano-conductive adhesives, Journal of Adhesion Science and Technology, 22, 815-834.
• [13] Kaboorani A., Riedl B., (2012) Nano-aluminum oxide as a reinforcing material for thermoplastic adhesives, Journal of Industrial and Engineering Chemistry, 18, 1076-1081.
• [14] Asılturk I., Akkus H., (2011) Determining the effect of cutting parameters on surface roughness in hard turning using the Taguchi method, Measurement, 44, 1697-1704.