EFFECTS OF HYDROLYZED ELECTROSTATIC POWDER COATING WASTES ON FLUIDITY AND DENSITY OF POLYOLEFINS

Yıl 2015, Cilt: 33 Sayı: 3, 377 - 383, 01.09.2015

Yılmaz Kısmet

Öz

In this study, electrostatic powder coating waste in their appropriate hydrolyzed thermoset structure were mixed with various polyolefins in different ratios and the dependence of the flow indexes and densities of the polyolefins in the melt flow on the powder coating waste were investigated. From the most known nine different types of thermoset powder coating systems only products obtained by the hydrolysis of wastes of polyester-epoxy and polyurethane systems were investigated. In addition, effects of mixtures of these two wastes on thermoplastics were also studied. Low and high density polyethylene and polypropylene were selected as the poliolefin systems.

Anahtar Kelimeler

Polyolefin, powder coating, recycling, melt flow index, density

Kaynakça

• [1] Kısmet, Y., Entwicklung eines Verfahrens für die Verwertung von Pulverlackrecyclaten, Universitätsverlag der TU Berlin, Endformat, Ges. für gute Druckerzeugnisse mbH, ISBN 978-3-7983-2479-4, Berlin, 2012.
• [2] Kaiser W., Polyolefine, Kunststoffchemie für Ingenieure, Carl Hanser Verlag München Wien, 2006.
• [3] Michaeli W., Verarbeitungsverfahren für die Kunststoffe, Einführung in die Kunststoffverarbeitung, 5. Auflage, Wien, 2006.
• [4] Judith Pietschmann: Industrielle Pulverbeschichtung, View & Sohn Verlag/GWV Fach-verlage GmbH, Wiesbaden, 2003.
• [5] Paola Nannetti: Lack für Einsteiger, Vincentz Network GmbH Co. KG, Hannover, 2009.
• [6] Detlef Gysau: Füllstoffe, Vincentz Network GmbH KG, Hannover, 2006.
• [7] Paolo Nanetti: Lack von A bis Z, Vincentz Network, Hannover, Germany, 2004.
• [8] Markus Petermann: Herstellung von Pulverlacken durch Versprühen gashaltiger Schmelzen, Dissertation von der Technischen Fakultät der Universität Erlangen Nürnberg, 1999.
• [9] Artur Goldschmidt, Hans-Joachim Streitberger: BASF-Handbuch Lackiertechnik, Vincentz Verlag Hannover, 2002.
• [10] Stoeckhert, K., Woebcken, W., Kunststoffen, Kunststoff-Lexikon. Wien 9. Auflage 1998.
• [11] Luo X., Li J., Feng J., Xie S., Lin X., “Evaluation of distillers grains as fillers for low density polyethylene: mechanical, reological and thermal characterization”, Composites Science and Technology, Cilt No: 89, 2013.