Higher order theory based analysis of laminated composite plates using functions trigonometric and trigonometric-hyperbolic

Yıl 2024, Cilt: 42 Sayı: 3, 822 - 830, 12.06.2024

Bouziane Bessaih Abdelkader Lousdad Abdelaziz Lairedj Abdelmalek Abdelmalek

Öz

This work studied in detail for the first time the bending of laminated composite plates subjected t mechanical variations by new theory Trigonometric and Trigonometric-Hyperbolic functions of shear deformation. From the Euler-Lagrange hypothesis and the equations of the shear deformation theory, we will develop a present method. One of the most important problems of composite plates is the analysis of their bending behavior. The correct approach used to study their bending behavior includes two trigonometric and trigonometric-hyperbolic functions satisfying the null shear stress condition at the free edges. In this paper the bending problem is solved analytically by developing a computational code and numerically solved by Finite Element Method. In order to simplify the study of the bending behavior, an approach taking into consideration the effect of the transverse shear deformation without the shear coefficient of correction with only four unknowns has been developed while requiring five or more unknowns for other theories. Convergence analysis has been carried and the results are compared to open literature available for plate bending analysis. The approach proves to be simple and useful in analyzing the bending behavior of composite layered plates.

Anahtar Kelimeler

Bending, Composite Plate, Computer Programming, Finite Element Method, Hyperbolic Trigonometry, Trigonometry Theory

Kaynakça

• [1] Kirchhoff GR. Uber das gleichgewicht und die bewegung einer elastischen Scheibe. J Reine Angew Math. 1850;40:5188. [CrossRef]
• [2] Mindlin RD. Influence of rotatory inertia and shear on flexural motions of isotropic, elastic plates. ASME J Appl Mech 1951;18:3138. [CrossRef]
• [3] Reissner E. The effects of transverse shear deformation on the bending of elastic plates. J Compos Mater 1945;12:6972. [CrossRef]
• [4] Reddy JN. A simple higher-order theory for laminated composite plates. J Appl Mech 1984;51:745752. [CrossRef]
• [5] Ferreira AJM, Roque CMC, Jorge RMN. Analysis of composite plates by trigonometric shear deformation theory and multiquadrics. J Compos Struct 2005;83:22252237. [CrossRef]
• [6] Soldatos KP. A transverse shear deformation theory for homogeneous monoclinic plates. Acta Mech 1992;94:195220. [CrossRef]
• [7] Karam M, Afaq KS, Mistou S. Mechanical behavior of laminated composite beam by the new multilayered laminated composite structures model with transverse shear stress continuity. Int J Solids Struct 2003;40:15251546. [CrossRef]
• [8] Thai HT, Choi DH. A simple first-order shear deformation theory for the bending and free vibration analysis of functionally graded plates. Compos Struct 2013;101:332340. [CrossRef]
• [9] Thai HT, Choi DH. Finite element formulation of various four unknown shear deformation theories for functionally graded plates. Finite Elem Anal Des 2013;75:5061. [CrossRef]
• [10] Thai HT, Choi DH. A simple first-order shear deformation theory for laminated composite plates. Compos Struct 2013;106:754763. [CrossRef]
• [11] Choudhary SS, Tungikar VB. A simple finite element for nonlinear analysis of composite plates. Int J Eng Sci Technol 2011;3:48974907.
• [12] Dash P, Singh BN. Geometrically nonlinear bending analysis of laminated composite plate. Commun Nonlinear Sci Numer Simul 2010;15:31703181. [CrossRef]
• [13] Dharmaraju T, Suresh Kumar J. Bending analysis of composite laminated plates using higher-order shear deformation theory with zig-zag function. ARPN J Eng Appl Sci 2011;6:106110.
• [14] Ganapathi M, Polit O, Touratier M. C0 eight-node membrane shear-bending element for geometrically non-linear (static and dynamic) analysis of laminates. Int J Numer Methods Eng 1996;39:34533474. [CrossRef]
• [15] Han W, Petyt M, Hsiao KM. Investigation into a geometrically nonlinear analysis of rectangular laminated plates using the hierarchical finite element method. Finite Elem Anal Des 1994;18:273288. [CrossRef]
• [16] Kam TY, Lin SC, Hsiao KM. Reliability analysis of nonlinear laminated composite plate structures. Compos Struct 1993;25:503510. [CrossRef]
• [17] Naghipour M, Daniali HM, Hashemi Kachapi SHA. Numerical simulation of composite plates to be used for optimization of mobile bridge deck. World Appl Sci J 2008;4:681690.
• [18] Ngo NK, Tran IT. Finite element analysis of laminated composite plates using high order shear deformation theory. Vietnam J Mech 2007;29:4757. [CrossRef]
• [19] Pandya BN, Kant T. Finite element analysis of laminated composite plates using a higher-order displacement model. Compos Sci Technol 1988;3:137155. [CrossRef]
• [20] Polit O, Touratier M. Multilayered/sandwich triangular finite element applied to linear and nonlinear analyses. Compos Struct 2002;58:121128. [CrossRef]
• [21] Reddy JN. Mechanics of Laminated Composite Plates. Boca Raton: CRC Press; 1997.
• [22] Reddy AR, Reddy BS, Reddy KVK. Application of design of experiments and artificial neural networks for stacking sequence optimizations of laminated composite plates. Int J Eng Sci Technol 2011;3:295310. [CrossRef]
• [23] Reddy R, Reddy BS, Reddy N, Surisetty S. Prediction of natural frequency of laminated composite plates using artificial neural networks. Eng 2012;4:329337. [CrossRef]
• [24] Salehi M, Falahatgar SR. Geometrically non-linear analysis of unsymmetrical fiber-reinforced laminated annular sector composite plates. Trans B Mech Eng 2010;17:205216.
• [25] Zouggar K, Guerraiche K, Lousdad A. Numerical and predictive analysis of the low-velocity impact response of UD composite plate under a controlled environment. Compos Struct 2022;299:116053. [CrossRef]
• [26] Rachid A, Ouinas D, Lousdad A, Zaoui FZ, Achour B, Gasmi H, Butt TA, Tounsi A. Mechanical behavior and free vibration analysis of FG doubly curved shells on elastic foundation via a new modified displacements field model of 2D and quasi-3D HSDTs. Thin-Walled Struct 2022;172:108783. [CrossRef]
• [27] Sur G, Erkan Ö. Cutting tool geometry in the drilling of CFRP composite plates and Taguchi optimisation of the cutting parameters affecting delamination. Sigma J Eng Nat Sci 2018;36:619628.
• [28] Sur G, Erkan Ö. Surface quality optimization of CFRP plates drilled with standard and step drill bits using TAGUCHI, TOPSIS and AHP method. Eng Comput 2021;38:21632187. [CrossRef]
• [29] Yaylacı M, Birinci A, Adiyaman G, Öner E. Analysis of a long strip containing an internal or edge crack using FEM. Sigma J Eng Nat Sci 2016;34:269278.
• [30] Yaylacı M. Comparison between numerical and analytical solutions for the receding contact problem. Sigma J Eng Nat Sci 2017;35:333346.
• [31] Yaylaci M, Abanoz M, Yaylaci EU, Olmez H, Sekban DM, Birinci A. The contact problem of the functionally graded layer resting on rigid foundation pressed via rigid punch. J Steel Compos Struct 2022;43:661672.
• [32] Yaylaci EU, Oner E, Yaylaci M, Ozdemir ME, Abushattal A, Birinci A. Application of artificial neural networks in the analysis of the continuous contact problem. J Steel Compos Struct 2022;84:3548.
• [33] Yaylaci M, Şengül Şabano B, Özdemir ME, Birinci A. Solving the contact problem of functionally graded layers resting on a HP and pressed with a uniformly distributed load by analytical and numerical methods. Struct Eng Mech 2022;82:401416.
• [34] Yaylaci M. The investigation crack problem through numerical analysis. Struct Eng Mech 2016;57:11431156. [CrossRef]
• [35] Yaylaci M. Simulate of edge and an internal crack problem and estimation of stress intensity factor through finite element method. Adv Nano Res 2022;12:405-414.
• [36] Yaylacı M, Abanoz M, Yaylaci EU, Olmez H, Sekban DM, Birinci A. Evaluation of the contact problem of functionally graded layer resting on rigid foundation pressed via rigid punch by analytical and numerical (FEM and MLP) methods. Arch Appl Mech 2022;92:19531971. [CrossRef]
• [37] Ergene B, Bolat Yaylaci Ç. A review on the recent investigation trends in abrasive waterjet cutting and turning of hybrid composites. Sigma J Eng Nat Sci 2019;37:9891016.
• [38] Hashim MKR, Abdul Majid MS, Jamir MRM, Kasim FH, Sultan MTH. The effect of stacking sequence and ply orientation on the mechanical properties of pineapple leaf fibre (PALF)/carbon hybrid laminate composites. Polymers 2021;13:455. [CrossRef]
• [39] Alshahrani H, Ahmed A. Enhancing impact energy absorption, flexural and crash performance properties of automotive composite laminates by adjusting the stacking sequences layup. Polymers 2021;13:3404. [CrossRef]
• [40] ANSYS. ANYS Theory Manual. Pennsylvania, USA: ANYS Inc; 2014.