BibTex RIS Kaynak Göster

SÜPREM KUMAŞLARDA PATLAMA MUKAVEMETİ DEĞERİNİN TAGUCHI ORTOGONAL DİZAYNA GÖRE OPTİMİZASYONU

Yıl 2010, Cilt: 20 Sayı: 4, 320 - 328, 01.12.2010

Öz

Bu çalışmada Taguchi ortogonal dizayna göre süprem kumaşların patlama mukavemeti değerinin optimizasyonu amaçlanmıştır. Taguchi tasarımına göre deneyler, L9 ortogonal dizaynına göre 9 adet deneme ile gerçekleştirilmiştir. Deney sonuçlarının değerlendirilmesinde varyans analizi ve sinyal/gürültü oranı kullanılmıştır. Tam faktöriyel deney tasarımında gereken deney sayısının sadece üçte biri ile (27 yerine 9 deney) hedeflenen sonuçların elde edilmesi mümkün olmuştur

OPTIMIZATION OF BURSTING STRENGTH OF SINGLE JERSEY FABRICS WITH TAGUCHI ORTHOGONAL DESIGN

Yıl 2010, Cilt: 20 Sayı: 4, 320 - 328, 01.12.2010

Öz

In this study, it was aimed to optimize the bursting strength of single jersey fabrics with Taguchi orthogonal design. The experiments were performed by using L9 orthogonal matrix with respect to Taguchi approach. Analysis of variance (ANOVA) and signal/noise ratio were used to evaluate the experiment results. In the case of full factorial design, it is necessary to perform 27 experiments to find out the optimum configuration but by using Taguchi approach, this was lower to 9 experiments

Toplam 0 adet kaynakça vardır.

Ayrıntılar

Diğer ID JA88BZ72GD
Bölüm Makaleler
Yazarlar

Serin Mezarcıöz Bu kişi benim

R. Tuğrul Oğulata Bu kişi benim

Yayımlanma Tarihi 1 Aralık 2010
Gönderilme Tarihi 1 Aralık 2010
Yayımlandığı Sayı Yıl 2010 Cilt: 20 Sayı: 4

Kaynak Göster

APA Mezarcıöz, S., & Oğulata, R. T. (2010). OPTIMIZATION OF BURSTING STRENGTH OF SINGLE JERSEY FABRICS WITH TAGUCHI ORTHOGONAL DESIGN. Textile and Apparel, 20(4), 320-328.

No part of this journal may be reproduced, stored, transmitted or disseminated in any forms or by any means without prior written permission of the Editorial Board. The views and opinions expressed here in the articles are those of the authors and are not the views of Tekstil ve Konfeksiyon and Textile and Apparel Research-Application Center.