Design and Energy Efficiency Analysis of a Shaft Generator for Military Ships

Kamer Gökbulut Belli; Burak Esenboğa; Abdurrahman Yavuzdeğer; Tuğçe Demirdelen

doi:10.5152/tepes.2024.24017

Design and Energy Efficiency Analysis of a Shaft Generator for Military Ships

Abstract

The rise in energy costs and growing environmental concerns are driving investments in energy-saving technologies, particularly in the maritime industry, including fishing, marine operations, and shipbuilding. Shaft generators are highly favored for their ease of installation, cost-effectiveness, reliability, and low maintenance costs as an energy production system of choice. These systems are well-suited to meet the energy demands of military vessels. As current energy costs and environmental pressures continue to escalate, shaft generators are recognized as pivotal technologies supporting energy conservation efforts. This study provides a comprehensive comparative analysis of the design and energy efficiency of two different shaft generator models employed on military ships. Using ANYSYS/Maxwell for design and analysis, the study evaluates power, torque, and efficiency across both models. The results emphasize that the efficiency of a shaft generator depends mainly on two factors: the number of motor poles and the operating frequency of the system. Moreover, the efficiency tends to decrease as the number of motor poles increases, but it improves as the system frequency rises.

Keywords

Supporting Institution

This research was supported by the Scientific Project Unit of Adana Alparslan Türkeş Science and Technology University (Project Number: 24803001).

Project Number

24803001

Thanks

The authors would like to acknowledge the Scientific Project Unit of Adana Alparslan Türkeş Science and Technology University for financial support.

References

1. M. Solla, S. Coache, and A. Sarasquete, “Shymgen system: Optimization the performance of shaft generator and drive train on fishing vessels,” Second International Symposium on Fishing Vessel Energy Efficiency, E-fishing Conference, Vigo, Spain, 2012.
2. H. Schoyen, and H. Sow, “‘A decision making tool concerning retrofit of shaft generator frequency converter,’ Elsevier,” Ocean Eng., vol. 109, pp. 103–112, Sep. 2015.
3. K. Gkotzia, G. J. Tsekouras, F. D. Kanellos, P. Michalopoulos, J. M. Prou- salidis, and N. E. Mastorakis, “Shaft-generators in ships: Techno-economic sensitivity analysis study,” 2016 Third International Conference on Mathematics and Computers in Sciences and in Industry (MCSI), Chania, Greece, 2016, pp. 20–25.
4. J. Prousalidis, C. Patsios, F. Kanellos, A. Sarigiannidis, N. Tsekouras, and G. Antonopoulos, “Exploiting shaft generators to improve ship efficiency,” 2012 Electrical. Systems for Aircraft, Railway and Ship Propul- sion, Bologna, Italy, 2012, pp. 1–6.
5. A. Avdeyev, and A. V. Vyngra, “Increase of operating efficiency of ship electrical generating plant with shaft generator,” Intelligent Energy Systems: Proceedings of the 5th International Youth Forum, vol. 1, Oct. 2017, pp. 255–258.
6. H. Liu, W. Fan, F., and Naijun Shen”Shaft power generation system based on BDFG,” 2014 IEEE Conference and Expo Transportation Electrification Asia-Pacific (ITEC Asia-Pacific), Beijing, China, 2014, pp. 1–4.
7. A. Sarasquete, M. Solla, and S. Coache, “Energy efficiency audits on ships: Impact of a variable speed shaft generation system on ship fuel consumption and propeller hydrodynamics,” World Maritime Technol- ogy Conference, Saint-Petersburg, Russia, June 2012.
8. A. A. Churkin, V. Y. Frolov, D. V. Ivanov, and B. A. Churkin, “Problems of shaft-generating installations implementation in the ship electric power systems,” 2020 IEEE Conference of Russian Young Researchers in Electrical and Electronic Engineering (EIConRus). St. Petersburg and Moscow, Russia, 2020, pp. 619–621.

9. N. R. Ammar, and I. S. Seddiek, “Enhancing energy efficiency for new generations of containerized shipping,” Ocean Eng., vol. 215, Nov. 2020.
10. T. Uyanık, “Machine learning approach to estimating operational electrical power on trade vessels: An application for shaft generator power prediction,” J. Intell. Transp. Syst. Appl. (JITSA), vol. 4, No.: 2, Sep., pp. 165–174, 2021.
11. C. Nuchturee, T. Li, and H. Xia, “Energy efficiency of integrated electric propulsion for ships – A review,” Renew. Sustain. Energy Rev., vol. 134, Dec. 2020.
12. B. H. Gully, M. E. Webber, and C. C. Seepersad, “Shaft motor-generation design assessment for increased operational efficiency in container ships,” Proceedings of the ASME 2011 5th International Conference on Energy Sustainability. ASME 2011 5th International Conference on Energy Sustainability, Parts A, B, and C. Washington, DC, USA, Aug. 2011, pp. 1813–1819.
13. J. Kruszewski, “Ship’s propulsion neural controller main engine - Pitch propeller - Shaft generator,” IFAC Proc. Volumes, vol. 47, no. 1, pp. 905–912, 2014.
14. X. Chen, and X. Wang, “A novel wound rotor BDFIG for ship shaft generator application- control and prototype tests,” 2014 17th International Conference on Electrical Machines and Systems (ICEMS), Hangzhou, China, Oct. 2014, pp. 1196–1200.
15. G. Liu, and X. Wang, “Design and performance analysis of a 700-kW wound-rotor BDFIG for ship shaft generator application,” IEEJ Trans. Electr. Electron. Eng., vol. 11, no. 1, pp. 112–123, Jan. 2016.
16. A. G. Sarigiannidis, E. Chatzinikolaou, C. Patsios, and A. G. Kladas, “Shaft generator system design and ship operation improvement involving SFOC minimization, electric grid conditioning, and auxiliary propulsion,” IEEE Trans. Transp. Electrif., vol. 2, no. 4, pp. 558–569, Dec. 2016.
17. A. Sarigiannidis, A. Kladas, E. Chatzinikolaou, and C. Patsios, “High effi- ciency shaft generator drive system design for Ro-Ro trailer-passenger ship application,” International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles (ESARS), Aachen, Germany, 2015, 2015, pp. 1–6.
18. S. Nishikata, A. Odaka, and Y. Koishikawa, “Steady-state performance analy- sis of shaft generator systems,” Proceedings of Power Conversion Conference - PCC ‘97, Nagaoka, Japan, Vol. 2, 1997, pp. 853–858.
19. K. Xia, Z. Zhang, N. Wang, and P. Zhang, “Operation control and simula tion research of the variable-speed constant-frequency system of the ship shaft generator,” 2016 IEEE Region 10 Conference (TENCON), Sin- gapore, 2016, pp. 301–304.
20. F. Xiong, and X. Wang, “Design and performance analysis of a brushless doubly-fed machine for stand-alone ship shaft generator systems,” 2011 International Conference on Electrical and Control. Engineering, Yichang, China, 2011, pp. 2114–2117.
21. D. Tarnapowicz, “The conception of the use of multi-level inverters in the shipping shaft generator systems of high power,” Scientific Journal Maritime Univ. Szczecinie, vol. 22, no. 94, pp. 67–70, 2010.
22. J. Zhang, L. Bai, and Q. Li, “The vector control research of brushless doubly-fed shaft generator for running independently,” 2015 IEEE Inter- national Conference on Mechatronics and Automation (ICMA), Beijing, China, 2015, pp. 797–801.
23. T. Zhao, D. Xiang, and Y. Zheng, “Control strategy to start a shaft genera- tor system employing DFIM under power take me home mode,” CPSS TPEA, vol. 4, no. 2, pp. 119–127, June 2019.
24. J. C. Dermentzoglou, “Investigating the incorporation of a doubly fed induction machine as a shaft generator into a ship’s system: Application of a vector control scheme for controlling the doubly fed induction machine,” 2014 International Conference on Electrical Machines (ICEM), Berlin, Germany, 2014, pp. 2319–2324.
25. L. Diao, D. Wang, Z. Peng, L. Guo, and H. Wang, “Sensorless control of a stand-alone Doubly fed induction machine for ship shaft generator systems,” Fifth International Conference on Intelligent Control. and Information Processing, Dalian, China, 2014, pp. 373–377.
26. T. Zhao, D. Xiang, and Y. Zheng, “An approach to start a shaft generator system employing DFIM under power take me home mode,” 2018 IEEE International Power Electronics and Application Conference and Exposition (PEAC), Shenzhen, China, 2018, pp. 1–5.
27. J. M. Gao, S. M. Wan, and L. L. Liu, “The research of marine shaft generator system based on brushless doubly-fed machine,” 2014 17th Inter- national Conference on Electrical Machines and Systems (ICEMS), Hangzhou, China, 2014, pp. 151–155.
28. Y. Liu, W. Ai, B. Chen, K. Chen, G. Luo, and S. Xu, “Operation control of the brushless doubly-fed machine for stand-alone ship shaft generator systems,” 2015 IEEE International Conference on Industrial Technology (ICIT), Seville, Spain, 2015, pp. 800–805.
29. L. Yijian, X. Shilong, and Y. Yinzhong, “Development of A new-type shaft- driven generator,” 2007 8th International Conference on Electronic Measurement and Instruments, Xi’an, China, 2007, pp. 1–422.
30. M. Wang, R. Zhou, X. Xu, and Y. Wang, “Research of the nonlinear torsional vibration of the marine diesel generator shaft system,” Proceed- ings of 2011 International Conference on Electronic & Mechanical Engineering and Information Technology, Harbin, China, 2011, pp. 397–400.
31. S. Nishikata, A. Odaka, Y. Koishikawa, and T. Kataoka, “Performance analysis of shaft generator systems,” Electr. Eng. Jpn, vol. 131, no. 3, pp.70–79, Mar. 2000.
32. N. H. Doerry, and D. H. Clayton, “Shipboard electrical power quality of service,” IEEE Electric Ship Technologies Symposium, 2005. Philadelphia, PA, USA, 2005, pp. 274–279.
33. J. Prousalidis, I. K. Hatzilau, P. Michalopoulos, I. Pavlou, and D. Muthu- muni, “Studying ship electric energy systems with shaft generator,” IEEE Electric Ship Technologies Symposium, 2005, Philadelphia, PA, USA, 2005, pp. 156–162.
34. Z. Haznadar, R. Jokic, S. Berberovic, and Z. Stih, “Numerical computation of ships’s shaft generator,” Third Slovenian-Polish Joint Seminar on Computational and Applied Electromagnetics 2005, Maribor, Slovenia, Jan. 2006.
35. A. G. Sarigiannidis, C. Patsios, A. Pittaras, and A. Kladas, “Geometry optimization of synchronous machines used on ship shaft generator systems,” Mater. Sci. Forum, vol. 792, pp. 245–250, 2014.
36. T. T. Nguyen, D. M. Nguyen, and Q. V. Ngo, “The Power-Sharing System of DFIG-Based Shaft Generator Connected to a Grid of the Ship” IEEE Access, vol. 9, pp. 109785–109792, 2021.
37. J. Mindykowski, “Power quality on ships: Today and tomorrow’s challenges,” 2014 International Conference and Exposition on Electrical and Power Engineering (EPE), Iasi, Romania, 2014, pp. 1–18.
38. A. Zhelezniak, “Model of evaluation of the efficiency of the ship’s diesel generator control system,” Vibroengineering Procedia, vol. 8, pp. 196–200, Oct. 2016.
39. A. Nyrkov, A. Shnurenko, S. Sokolov, S. Chernyi, and V. Korotkov, “Some methods of increasing the efficiency of river transport system,” Procedia Eng., vol. 178, pp. 543–550, 2017.
40. A. V. Grigoryev, and R. R. Zainullin, “Analysis of operation modes of ship shaft generator sets with frequency converters and synchronous compensators,” Admiral Makarov State Univ. Marit. Inland Ship., vol. 3, no. 31, pp. 164–171, 2015.

Details

Primary Language

English

Subjects

Electrical Machines and Drives

Journal Section

Research Article

Authors

Kamer Gökbulut Belli This is me
0000-0001-6850-2494
Türkiye

Burak Esenboğa ^*
0000-0002-7777-259X
Türkiye

Abdurrahman Yavuzdeğer
0000-0001-8058-4672
Türkiye

Tuğçe Demirdelen
0000-0002-1602-7262
Türkiye

Publication Date

October 31, 2024

Submission Date

July 3, 2024

Acceptance Date

August 5, 2024

Published in Issue

Year 2024 Volume: 4 Number: 3

DOI

https://doi.org/10.5152/tepes.2024.24017

IZ

https://izlik.org/JA75ME49MD

Cite

RIS / Bibtex

APA

Belli, K. G., Esenboğa, B., Yavuzdeğer, A., & Demirdelen, T. (2024). Design and Energy Efficiency Analysis of a Shaft Generator for Military Ships. Turkish Journal of Electrical Power and Energy Systems, 4(3), 165-180. https://doi.org/10.5152/tepes.2024.24017

AMA

1.Belli KG, Esenboğa B, Yavuzdeğer A, Demirdelen T. Design and Energy Efficiency Analysis of a Shaft Generator for Military Ships. TEPES. 2024;4(3):165-180. doi:10.5152/tepes.2024.24017

Chicago

Belli, Kamer Gökbulut, Burak Esenboğa, Abdurrahman Yavuzdeğer, and Tuğçe Demirdelen. 2024. “Design and Energy Efficiency Analysis of a Shaft Generator for Military Ships”. Turkish Journal of Electrical Power and Energy Systems 4 (3): 165-80. https://doi.org/10.5152/tepes.2024.24017.

EndNote

Belli KG, Esenboğa B, Yavuzdeğer A, Demirdelen T (October 1, 2024) Design and Energy Efficiency Analysis of a Shaft Generator for Military Ships. Turkish Journal of Electrical Power and Energy Systems 4 3 165–180.

IEEE

[1]K. G. Belli, B. Esenboğa, A. Yavuzdeğer, and T. Demirdelen, “Design and Energy Efficiency Analysis of a Shaft Generator for Military Ships”, TEPES, vol. 4, no. 3, pp. 165–180, Oct. 2024, doi: 10.5152/tepes.2024.24017.

ISNAD

Belli, Kamer Gökbulut - Esenboğa, Burak - Yavuzdeğer, Abdurrahman - Demirdelen, Tuğçe. “Design and Energy Efficiency Analysis of a Shaft Generator for Military Ships”. Turkish Journal of Electrical Power and Energy Systems 4/3 (October 1, 2024): 165-180. https://doi.org/10.5152/tepes.2024.24017.

JAMA

1.Belli KG, Esenboğa B, Yavuzdeğer A, Demirdelen T. Design and Energy Efficiency Analysis of a Shaft Generator for Military Ships. TEPES. 2024;4:165–180.

MLA

Belli, Kamer Gökbulut, et al. “Design and Energy Efficiency Analysis of a Shaft Generator for Military Ships”. Turkish Journal of Electrical Power and Energy Systems, vol. 4, no. 3, Oct. 2024, pp. 165-80, doi:10.5152/tepes.2024.24017.

Vancouver

1.Kamer Gökbulut Belli, Burak Esenboğa, Abdurrahman Yavuzdeğer, Tuğçe Demirdelen. Design and Energy Efficiency Analysis of a Shaft Generator for Military Ships. TEPES. 2024 Oct. 1;4(3):165-80. doi:10.5152/tepes.2024.24017