Research Article

Modeling and Simulation of Reactive Power Compensation Using a Synchronous Motor with Excitation Control in MATLAB/Simulink

Volume: 6 Number: 3 October 27, 2026

Modeling and Simulation of Reactive Power Compensation Using a Synchronous Motor with Excitation Control in MATLAB/Simulink

Abstract

This study investigates reactive power compensation using a synchronous motor in a three-phase electrical power system without conventional capacitor banks through MATLAB/Simulink-based modeling and simulation. The proposed system consists of inductive loads and a 15 kVA synchronous motor operating as a dynamic reactive power compensator via excitation current control. Different operating conditions were analyzed by varying the excitation voltage and current parameters. The simulation results demonstrated that the proposed compensation method significantly reduced reactive power demand and improved the overall system power factor to nearly unity (PF ≈ 1.00). In addition, the apparent power demand decreased from 24 kVA to 21.63 kVA under optimized operating conditions, resulting in lower transmission line current, reduced power losses, improved voltage stability, and enhanced overall system efficiency. The findings confirm that synchronous motor-based reactive power compensation provides a flexible, reliable, and dynamically controllable alternative to conventional capacitor bank systems under varying load conditions.

Keywords

References

  1. W. Hofmann, J. Schlabbach, W. Just, “Reactive Power Compensation: A Practical Guide,” John Wiley & Sons, 2012.
  2. R. Bayındır, Ş. Sağıroğlu, İ. Çolak, “Yapay sinir ağları tabanlı reaktif güç kompanzasyonu,” Politeknik Dergisi, vol. 10, no. 2, pp. 129-135, 2007.
  3. T. Vardar, E. Çam, E. Yalçın, “Reaktif Güç Kompanzasyonu ile Enerji Verimliliği ve Kamu Kurumlarında Reaktif Güç Kompanzasyonu,” International Journal of Engineering Research and Development, vol. 2, no. 2, pp. 20-24, 2010.
  4. M. B. Doğruyol, “Endüstri 4.0 perspektifinde yapay sinir ağları kontrollü reaktif güç kompanzasyonu,” Harran Üniversitesi, Fen Bilimleri Enstitüsü, Yüksek Lisans Tezi, Şanlıurfa, 2020.
  5. F. O. Igbinovia, G. Fandi, J. Švec, Z. Müller, J. Tlusty, “Comparative review of reactive power compensation technologies,” In 2015 16th International Scientific Conference on Electric Power Engineering (EPE), pp. 2-7, IEEE, 2015.
  6. A. Gani, H. Acikgoz, Ö. F. Kececioglu, E. Kilic, M. Sekkeli, “A simulation study on controlling excitation current of synchronous motor and reactive power compensation via PSO based PID and PID controllers,” Journal of Intelligent Systems with Applications, vol. 1, no. 2, 2018.
  7. H. Dirik, C. Gezegin, H. S. Dirik, “Reactive power compensation with hybrid compensator combining a synchronous motor and switched capacitors,” Electric Power Systems Research, 216, 109010, 2023.
  8. M. M. S. Al-suod, “Modeling of an Active Reactive Power Compensator Operation in an Autonomous Electric Power System,” International Journal of Electrical and Electronic Engineering & Telecommunications, vol. 12, no. 6, pp. 373-384, 2023.

Details

Primary Language

English

Subjects

Electrical Energy Transmission, Networks and Systems, Electrical Machines and Drives

Journal Section

Research Article

Publication Date

October 27, 2026

Submission Date

May 19, 2026

Acceptance Date

July 27, 2026

Published in Issue

Year 2026 Volume: 6 Number: 3

APA
Pamuk, N., Çarkli, H., & İçten, H. (2026). Modeling and Simulation of Reactive Power Compensation Using a Synchronous Motor with Excitation Control in MATLAB/Simulink. Turkish Journal of Electrical Power and Energy Systems, 6(3), 178-191. https://doi.org/10.67047/tepes.1954923
AMA
1.Pamuk N, Çarkli H, İçten H. Modeling and Simulation of Reactive Power Compensation Using a Synchronous Motor with Excitation Control in MATLAB/Simulink. TEPES. 2026;6(3):178-191. doi:10.67047/tepes.1954923
Chicago
Pamuk, Nihat, Hamzahan Çarkli, and Hakan İçten. 2026. “Modeling and Simulation of Reactive Power Compensation Using a Synchronous Motor With Excitation Control in MATLAB Simulink”. Turkish Journal of Electrical Power and Energy Systems 6 (3): 178-91. https://doi.org/10.67047/tepes.1954923.
EndNote
Pamuk N, Çarkli H, İçten H (October 27, 2026) Modeling and Simulation of Reactive Power Compensation Using a Synchronous Motor with Excitation Control in MATLAB/Simulink. Turkish Journal of Electrical Power and Energy Systems 6 3 178–191.
IEEE
[1]N. Pamuk, H. Çarkli, and H. İçten, “Modeling and Simulation of Reactive Power Compensation Using a Synchronous Motor with Excitation Control in MATLAB/Simulink”, TEPES, vol. 6, no. 3, pp. 178–191, Oct. 2026, doi: 10.67047/tepes.1954923.
ISNAD
Pamuk, Nihat - Çarkli, Hamzahan - İçten, Hakan. “Modeling and Simulation of Reactive Power Compensation Using a Synchronous Motor With Excitation Control in MATLAB Simulink”. Turkish Journal of Electrical Power and Energy Systems 6/3 (October 27, 2026): 178-191. https://doi.org/10.67047/tepes.1954923.
JAMA
1.Pamuk N, Çarkli H, İçten H. Modeling and Simulation of Reactive Power Compensation Using a Synchronous Motor with Excitation Control in MATLAB/Simulink. TEPES. 2026;6:178–191.
MLA
Pamuk, Nihat, et al. “Modeling and Simulation of Reactive Power Compensation Using a Synchronous Motor With Excitation Control in MATLAB Simulink”. Turkish Journal of Electrical Power and Energy Systems, vol. 6, no. 3, Oct. 2026, pp. 178-91, doi:10.67047/tepes.1954923.
Vancouver
1.Nihat Pamuk, Hamzahan Çarkli, Hakan İçten. Modeling and Simulation of Reactive Power Compensation Using a Synchronous Motor with Excitation Control in MATLAB/Simulink. TEPES. 2026 Oct. 27;6(3):178-91. doi:10.67047/tepes.1954923