Research Article

A new trochoidal toolpath in milling operations

356 - 365, 11.04.2023
https://doi.org/10.18186/thermal.1281284

Abstract

The milling is a widely used method in the manufacturing industry, especially in the production of complex engravings such as die&molds. Rough milling often requires a large material removal rate in a short time. This purpose also requires the selection and use of the best milling tool path. Today, trochoidal milling is receiving more attention than conventional milling, especially as it significantly increases tool life. In this study, a new toolpath model for trochoidal milling is suggested and this proposed toolpath model is examined in terms of cutting temperature, cutting force, surface quality, tool wear. In this new trochoidal toolpath model proposed for the milling method, the cutting force did not change much compared to the standard trochoidal tool path, but better surface quality and less tool wear were observed.

There are 0 citations in total.

Details

Primary Language English
Subjects Mechanical Engineering
Authors

Murat Kıyak 0000-0002-9906-8683

Ugur Emiroğlu This is me 0000-0002-0819-2217

Orhun Baştekeli This is me 0000-0001-8287-7030

Publication Date April 11, 2023
Submission Date July 14, 2021

Cite

APA Kıyak, M., Emiroğlu, U., & Baştekeli, O. (n.d.). A new trochoidal toolpath in milling operations. Journal of Thermal Engineering356-365. https://doi.org/10.18186/thermal.1281284
AMA Kıyak M, Emiroğlu U, Baştekeli O. A new trochoidal toolpath in milling operations. Journal of Thermal Engineering.:356-365. doi:10.18186/thermal.1281284
Chicago Kıyak, Murat, Ugur Emiroğlu, and Orhun Baştekeli. “A New Trochoidal Toolpath in Milling Operations”. Journal of Thermal Engineeringn.d., 356-65. https://doi.org/10.18186/thermal.1281284.
EndNote Kıyak M, Emiroğlu U, Baştekeli O A new trochoidal toolpath in milling operations. Journal of Thermal Engineering 356–365.
IEEE M. Kıyak, U. Emiroğlu, and O. Baştekeli, “A new trochoidal toolpath in milling operations”, Journal of Thermal Engineering, pp. 356–365, doi: 10.18186/thermal.1281284.
ISNAD Kıyak, Murat et al. “A New Trochoidal Toolpath in Milling Operations”. Journal of Thermal Engineering. n.d. 356-365. https://doi.org/10.18186/thermal.1281284.
JAMA Kıyak M, Emiroğlu U, Baştekeli O. A new trochoidal toolpath in milling operations. Journal of Thermal Engineering.;:356–365.
MLA Kıyak, Murat et al. “A New Trochoidal Toolpath in Milling Operations”. Journal of Thermal Engineering, pp. 356-65, doi:10.18186/thermal.1281284.
Vancouver Kıyak M, Emiroğlu U, Baştekeli O. A new trochoidal toolpath in milling operations. Journal of Thermal Engineering. :356-65.

IMPORTANT NOTE: JOURNAL SUBMISSION LINK http://eds.yildiz.edu.tr/journal-of-thermal-engineering