Design and development of air ventilated air bed for hospitalized patients

Yıl 2023, , 1643 - 1654, 30.11.2023

Darshan Karanje Shivroop Patıl Shivraj Gursal Prafulla Hatte

https://doi.org/10.18186/thermal.1401660

Öz

Proper ventilation is a critical consideration for the comfort of hospitalized patients. Dry skin, skin rashes, weariness, poor sleep, and other concerns caused by insufficient ventilation can all be avoided with proper ventilation. Air-Ventilated Air Beds are used to supply air to the major parts of the patient’s body. This air bed is constructed in such a way that air is circulated con-tinually throughout the body of the hospitalized patient. It is especially beneficial for people who are bedridden and need to spend a significant amount of time in bed due to illness. Exces-sive heat generated between the bed and the patient is perhaps the common cause of bedsores. Sweating is the leading cause of bedsores. Air ventilation is included in the system to prevent sweating and reduce the incidences of bedsores. Dual compressors, rubber tubes, flow control valves, and anti-decubitus mattresses are among the components used. The rubber tubes are used to ventilate the space between the body of the patient and the upper surface of the air bed. Above the mattress, the rubber tube mesh is positioned. The air is first compressed in two compressors before passing through the distribution manifold and through the meshing. The tubes are altered by drilling holes at certain intervals. The air from the compressor is circulated through the pipes before passing through the openings in the pipes. The unrestricted passage of compressed air via a capillary tube lowers the temperature of the air. The air exhausted through the capillary tubes maintains the patient’s body temperature stable for a while before lowering it. The air is ventilated throughout the bed in this manner. Bedsore can be avoided by reduction of sweat by using the air in close contact with the patient.

Anahtar Kelimeler

Air Ventilated Air Bed, Hospitalized patients, Bedsore, Ventilation

Kaynakça

• REFERENCES
• [1] Jaichandar KS, García EAM. Intelli-Sense Bed Patient Movement Sensing and Anti-Sweating System for Bed Sore Prevention in a Clinical Environment. In: Proceedings of the 2011 8th International Conference on Information, Communications & Signal Processing; 13-16 December 2011; Singapore. IEEE; 2011. [CrossRef]
• [2] Demarré L, Beeckman D, Vanderwee K, Defloor T, Grypdonck M, Verhaeghe S. Multi-stage versus single-stage inflation and deflation cycle for alternating low pressure air mattresses to prevent pressure ulcers in hospitalised patients: A randomised-controlled clinical trial. Int J Nurs Stud. 2012;49(4):416–426. [CrossRef]
• [3] Vanderwee K, Grypdonck M, Defloor T. Alternating pressure air mattresses as prevention for pressure ulcers: A literature review. Int J Nurs Stud 2008;45:784–801. [CrossRef]
• [4] Beeckman D, Serraes B, Anrys C, Van Tiggelen H, Van Hecke A, Verhaeghe S. A multicentre prospective randomised controlled clinical trial comparing the effectiveness and cost of a static air mattress and alternating air pressure mattress to prevent pressure ulcers in nursing home residents. Int J Nurs Stud 2019;97:105–113. [CrossRef]
• [5] Depypere F, Pieters JG, Dewettinck K. CFD analysis of air distribution in fluidised bed equipment. Powder Technol 2004;145:176–189. [CrossRef]
• [6] Nair P, Mathur S, Bhandare R, Narayanan G. Bed sore prevention using pneumatic controls. In: Proceedings of the 2020 IEEE International Conference on Electronics, Computing and Communication Technologies (CONECCT); 02-04 July 2020; Bangalore, India. IEEE; 2020. [CrossRef]
• [7] Barsocchi P. Position recognition to support bedsores prevention. IEEE J Biomed Health Inform 2013;17:53–59. [CrossRef]
• [8] Manoj R, Kumarasami R, Joseph J, George B, Sivaprakasam M. Continuous weight monitoring system for ICU beds using air-filled mattresses/pads: a proof of concept. In: Proceedings of the 2019 IEEE International Symposium on Medical Measurements and Applications (MeMeA); 2019:1–5. IEEE; 2019. [CrossRef]
• [9] Walton-Geer PS. Prevention of Pressure Ulcers in the Surgical Patient. AORN J 2009;89:538–552.
• [10] Shin JH, Chee YJ, Jeong DU, Park KS. Nonconstrained sleep monitoring system and algorithms using air-mattress with balancing tube method. IEEE Trans Inf Technol Biomed 2010;14:147–156. [CrossRef]
• [11] Rosenthal MJ, Felton RM, Nastasi AE, Naliboff BD, Harker J, Navach JH. Healing of Advanced Pressure Ulcers by a Generic Total Contact Seat: 2 Randomized Comparisons with Low Air Loss Bed Treatments. Arch Phys Med Rehabil 2003;84:1733–1742. [CrossRef]
• [12] Manzano F, Colmenero M, Pérez-Pérez AM, Roldán D, Jiménez-Quintana MM del M, Mañas MR, et al. Comparison of two repositioning schedules for the prevention of pressure ulcers in patients on mechanical ventilation with alternating pressure air mattresses. Intensive Care Med 2014;40:1679–1687. [CrossRef]
• [13] Kandha Vadivu P. Design and development of portable support surface and multilayered fabric cover for bed sore prevention. Indian J Surg 2015;77(Suppl 2):576–582. [CrossRef]
• [14] Takashima A, Misaki A, Takasugi SI, Yamamoto M. Characteristic analysis of an air cell for active air mattress of prevention for pressure ulcer. Adv Robot 2014;28:497–504. [CrossRef]
• [15] Lv B, Luo Z, Zhang B, Zhao Y, Zhou C, Yuan W. Effect of the secondary air distribution layer on separation density in a dense-phase gas-solid fluidized bed. Int J Min Sci Technol 2015;25:969–973. [CrossRef]
• [16] Pawaskar P, Khade S, Patil N, Meshram N, Purandare P. Design and Development of Anti-bedsore Air Mattress. Int J Eng Res Mech Civ Eng 2021;6:39–43.
• [17] Serraes B, van Leen M, Schols J, Van Hecke A, Verhaeghe S, Beeckman D. Prevention of pressure ulcers with a static air support surface: A systematic review. Int Wound J 2018;15:333–343. [CrossRef]
• [18] Chanpur ML, Rajhans NR. Ergonomic bed to reduce bedsores for bedridden patients. In: Proceedings of the International Conference on Ergonomics and Human Factors, HWWE 2011; Pune, India. 2011.
• [19] Shi C, Dumville JC, Cullum N. Support surfaces for pressure ulcer prevention: A network meta-analysis. PLoS One 2018;13:e0192707. [CrossRef]
• [20] Bivolarova MP, Melikov AK, Mizutani C, Kajiwara K, Bolashikov ZD. Bed-integrated local exhaust ventilation system combined with local air cleaning for improved IAQ in hospital patient rooms. Build Environ 2016;100:10–18. [CrossRef]
• [21] Chaudhari K, Mahajan NP, Pande K, Dadhaniya RR, Jarika A. To study the development of pressure sores in chronically bed ridden patients in a tertiary care centre: observational study. Int J Adv Res 2022;10:292–298. [CrossRef]