Review
BibTex RIS Cite

COMPREHENSIVE REVIEW ON THE FLOW CHARACTERISTICS OF TWO-PHASE FLOWS IN INCLINED TUBES

Year 2021, , 483 - 549, 01.03.2021
https://doi.org/10.18186/thermal.887821

Abstract

This paper presents a comprehensive review of research works on condensation and boiling heat transfer characteristics in horizontal, vertical and inclined tubes both smooth and enhanced. Although there are many studies examining two-phase flows inside tubes, it is almost impossible to find such a comprehensive study for
two-phase flow in tubes. Moreover, while number of the studies concerning condensation or boiling inside tubes are limited, the present study covers almost all studies of condensation and boiling inside inclined tubes. Previous studies are classified into many subtitles according to configuration (horizontal, vertical or inclined) and roughness (smooth or enhanced) as well as aim of the study (researching the effect of parameters on the heat transfer coefficient, pressure drop or evaluation of prediction correlation). Such a wide range of classification and scope have no done before. Condensation and boiling phenomena are of great importance in heat exchangers, cooling systems, etc. due to their wide utilization in those devices. Additionally, two-phase flow and the associated heat transfer are becoming increasingly important in industrial applications because the heat transfer coefficient in twophase flows is much higher than in single-phase flows. In this research, major topics such as heat transfer, pressure drop, friction factor and void fraction were studied using active and passive techniques in the literature.

The fluids used in the reviewed studies diverse in a very wide range. For pure refrigerants (single component-fluorocarbon refrigerant), R11, R12, R22, R32, R-113, R123, R-124, R125, R134, R134a, R142b, R152a, R236fa, R245fa, R-600a, R1234ze, R1234yf and for zeotropic blend refrigerants, a mixture of two or more components having different boiling points, R410A, R404A, R407C, R447A are used. As zeotropic blend refrigerants, a mixture of two or more components that boil at the same temperature, R502. Besides, water (steam for condensation), FC72, CFC 113, Propane, HFE 7000 (1-methoxyheptafluoropropane), R744 (CO2), and liquid nitrogen are involved in researchers’ studies.

In the present review, effects of parameters on two-phase flow heat characteristics are evaluated. Based on the evaluation, it can be drawn that inclination angle have significant effect on both condensation and boiling heat transfer coefficient and pressure drop. On the other hand, it was found that vapour quality and roughness were the main parameters affecting two-phase flow heat transfer characteristics. Effects of all parameters are discussed in the corresponding section. When existing correlations in the literature on prediction flow boiling heat transfer coefficient are evaluated, correlations proposed by Müller-Steinhagen and Heck [103] and Friedel [113] were to be best for prediction well according to majority of researchers and for performance of prediction on pressure drop correlation by Müller-Steinhagen and Heck [103] stood out.

References

  • [1] In S, Jeong S. Flow boiling heat transfer characteristics of R123 and R134a in a micro-channel. International Journal of Multiphase Flow. 2009 Nov 1;35(11):987-1000.
  • [2] Ong CL, Thome JR. Flow boiling heat transfer of R134a, R236fa and R245fa in a horizontal 1.030 mm circular channel. Experimental Thermal and Fluid Science. 2009 Apr 1;33(4):651-63.
  • [3] Li W, Ma X, Sun ZC, He Y, Sherif SA, Zhang JH, Zhu HT. Evaporation heat transfer characteristics ofR410A inside horizontal three-dimensional enhanced tubes. International Journal of Thermal Sciences. 2019 Mar 1;137:456-66.
  • [4] Akhavan-Behabadi MA, Esmailpour M. Experimental study of evaporation heat transfer of R-134a inside a corrugated tube with different tube inclinations. international communications in heat and mass transfer. 2014 Jul 1;55:8-14.
  • [5] Mohseni SG, Akhavan-Behabadi MA. Visual study of flow patterns during condensation inside a microfin tube with different tube inclinations. International communications in heat and mass transfer. 2011 Oct 1;38(8):1156-61.
  • [6] Yu J, Jiang Y, Cai W, Li X, Zhu Z. Condensation flow patterns and heat transfer correction for zeotropic hydrocarbon mixtures in a helically coiled tube. International Journal of Heat and Mass Transfer. 2019 Nov 1;143:118500.
  • [7] Estellé P, Cabaleiro D, Żyła G, Lugo L, Murshed SS. Current trends in surface tension and wetting behavior of nanofluids. Renewable and Sustainable Energy Reviews. 2018 Oct 1;94:931-44.
  • [8] Saisorn S, Wongwises S. The effects of channel diameter on flow pattern, void fraction and pressure drop of two-phase air–water flow in circular micro-channels. Experimental thermal and fluid science. 2010 May 1;34(4):454-62.
  • [9] Lips S, Meyer JP. Two-phase flow in inclined tubes with specific reference to condensation: a review. International Journal of Multiphase Flow. 2011 Oct 1;37(8):845-59.
  • [10] Barnea D. A unified model for predicting flow-pattern transitions for the whole range of pipe inclinations. International Journal of Multiphase Flow. 1987 Jan 1;13(1):1-2.
  • [11] Nitheanandan T, Soliman HM. Influence of tube inclination on the flow regime boundaries of condensing steam. The Canadian Journal of Chemical Engineering. 1993 Feb;71(1):35-41.
  • [12] Wang WC, Ma XH, Wei ZD, Yu P. Two-phase flow patterns and transition characteristics for in-tube condensation with different surface inclinations. International journal of heat and mass transfer. 1998 Oct 1;41(24):4341-9.
  • [13] Ghajar AJ, Tang CC. Heat transfer measurements, flow pattern maps, and flow visualization for nonboiling two-phase flow in horizontal and slightly inclined pipe. Heat Transfer Engineering. 2007 Jun 1;28(6):525-40.
  • [14] Kang Y, Davies III WA, Hrnjak P, Jacobi AM. Effect of inclination on pressure drop and flow regimes in large flattened-tube steam condensers. Applied Thermal Engineering. 2017 Aug 1;123:498-513.
  • [15] Davies III WA, Hrnjak P. Heat transfer in a large, inclined, flattened-tube steam condenser. Heat Transfer Engineering. 2020 Sep 24;41(17):1443-56.
  • [16] Cao S, Ji X, Xu J. R245fa condensation heat transfer in a phase separation condenser. Experimental Thermal and Fluid Science. 2018 Nov 1;98:346-61.
  • [17] Lips S, Meyer JP. Effect of gravity forces on heat transfer and pressure drop during condensation of R134a. Microgravity Science and Technology. 2012 Jun;24(3):157-64.
  • [18] Barbosa Jr JR, Ferreira JC, Hense D. Onset of flow reversal in upflow condensation in an inclinable tube. Experimental Thermal and Fluid Science. 2016 Oct 1;77:55-70.
  • [19] Hanafizadeh P, Hojati A, Karimi A. Experimental investigation of oil–water two phase flow regime in an inclined pipe. Journal of Petroleum Science and Engineering. 2015 Dec 1;136:12-22.
  • [20] Mozafari M, Akhavan-Behabadi MA, Qobadi-Arfaee H, Hanafizadeh P, Fakoor-Pakdaman M. Experimental study on condensation flow patterns inside inclined U-bend tubes. Experimental Thermal and Fluid Science. 2015 Nov 1;68:276-87.
  • [21] Xiao J, Hrnjak P. A new flow regime map and void fraction model based on the flow characterization of condensation. International Journal of Heat and Mass Transfer. 2017 May 1;108:443-52.
  • [22] Park I, Mudawar I. Climbing film, flooding and falling film behavior in upflow condensation in tubes. International Journal of Heat and Mass Transfer. 2013 Oct 1;65:44-61.
  • [23] El Hajal J, Thome JR, Cavallini A. Condensation in horizontal tubes, part 1: two-phase flow pattern map. International Journal of Heat and Mass Transfer. 2003 Aug 1;46(18):3349-63.
  • [24] Thome JR, El Hajal J, Cavallini A. Condensation in horizontal tubes, part 2: new heat transfer model based on flow regimes. International journal of heat and mass transfer. 2003 Aug 1;46(18):3365-87.
  • [25] Aroonrat K, Wongwises S. Experimental study on two-phase condensation heat transfer and pressure drop of R-134a flowing in a dimpled tube. International Journal of Heat and Mass Transfer. 2017 Mar 1;106:437-48.
  • [26] Cavallini A, Censi G, Del Col D, Doretti L, Longo GA, Rossetto L. Experimental investigation on condensation heat transfer and pressure drop of new HFC refrigerants (R134a, R125, R32, R410A, R236ea) in a horizontal smooth tube. International Journal of Refrigeration. 2001 Jan 1;24(1):73-87.
  • [27] Nualboonrueng T, Wongwises S. Two-phase flow pressure drop of HFC-134a during condensation in smooth and micro-fin tubes at high mass flux. International communications in heat and mass transfer. 2004 Oct 1;31(7):991-1004.
  • [28] Briggs A, Kelemenis C, Rose JW. Heat transfer and pressure drop measurements for in-tube condensation of CFC-113 using microfin tubes and wire inserts. Experimental heat transfer. 2000 Jul 1;13(3):163-81.
  • [29] Macdonald M, Garimella S. Hydrocarbon condensation in horizontal smooth tubes: Part I–Measurements. International Journal of Heat and Mass Transfer. 2016 Feb 1;93:75-85.
  • [30] Macdonald M, Garimella S. Hydrocarbon condensation in horizontal smooth tubes: Part II–Heat transfer coefficient and pressure drop modeling. International Journal of Heat and Mass Transfer. 2016 Feb 1;93:1248-61.
  • [31] Kim SM, Kim J, Mudawar I. Flow condensation in parallel micro-channels–Part 1: Experimental results and assessment of pressure drop correlations. International journal of heat and mass transfer. 2012 Jan 31;55(4):971-83.
  • [32] Son CH, Oh HK. Condensation pressure drop of R22, R134a and R410A in a single circular microtube. Heat and Mass Transfer. 2012 Aug;48(8):1437-50.
  • [33] Liu N, Li JM, Sun J, Wang HS. Heat transfer and pressure drop during condensation of R152a in circular and square microchannels. Experimental thermal and fluid science. 2013 May 1;47:60-7.
  • [34] Laohalertdecha S, Wongwises S. The effects of corrugation pitch on the condensation heat transfer coefficient and pressure drop of R-134a inside horizontal corrugated tube. International Journal of Heat and Mass Transfer. 2010 Jun 1;53(13-14):2924-31.
  • [35] Salimpour MR, Yarmohammadi S. Effect of twisted tape inserts on pressure drop during R-404A condensation. International journal of refrigeration. 2012 Mar 1;35(2):263-9.
  • [36] Salimpour MR, Gholami H. Effect of inserting coiled wires on pressure drop of R-404A condensation. International journal of refrigeration. 2014 Apr 1;40:24-30.
  • [37] Lips S, Meyer JP. Experimental study of convective condensation in an inclined smooth tube. Part II: Inclination effect on pressure drops and void fractions. International Journal of Heat and Mass Transfer. 2012 Jan 15;55(1-3):405-12.
  • [38] Lips S, Meyer JP. Stratified flow model for convective condensation in an inclined tube. International Journal of Heat and Fluid Flow. 2012 Aug 1;36:83-91.
  • [39] Ahn TH, Yun BJ, Jeong JJ, Kang KH, Park YS, Cheon J, Jerng DW. Development of a new condensation model for the nearly-horizontal heat exchanger tube under the steam flowing conditions. International Journal of Heat and Mass Transfer. 2014 Dec 1;79:876-84.
  • [40] Ahn T, Kang J, Bae B, Jeong JJ, Yun B. Steam condensation in horizontal and inclined tubes under stratified flow conditions. International Journal of Heat and Mass Transfer. 2019 Oct 1;141:71-87.
  • [41] Würfel R, Kreutzer T, Fratzscher W. Turbulence transfer processes in adiabatic and condensing film flow in an inclined tube. Chemical Engineering & Technology: Industrial Chemistry‐Plant Equipment‐Process Engineering‐Biotechnology. 2003 Apr 9;26(4):439-48.
  • [42] Grolman E, Fortuin JM. Gas-liquid flow in slightly inclined pipes. Chemical engineering science. 1997 Dec 1;52(24):4461-71.
  • [43] Grolman E. Gas-Liquid Flow with Low Liquid Loading in Slightly Inclined Pipes. (Doctoral thesis) 1994 Retrieved from https://www.worldcat.org/title/gas-liquid-flow-with-low-liquid-loading-inslightlyinclined-pipes/oclc/906984277#borrow
  • [44] Ottens M, Hoefsloot HC, Hamersma PJ. Correlations predicting liquid hold-up and pressure gradient in steady-state (nearly) horizontal co-current gas-liquid pipe flow. Chemical Engineering Research and Design. 2001 Jul 1;79(5):581-92.
  • [45] Zhang HQ, Wang Q, Sarica C, Brill JP. Unified model for gas-liquid pipe flow via slug dynamics—part 1: model development. J. Energy Resour. Technol.. 2003 Dec 1;125(4):266-73.
  • [46] Zhang HQ, Wang Q, Sarica C, Brill JP. Unified model for gas-liquid pipe flow via slug dynamics—Part 2: Model validation. J. Energy Resour. Technol.. 2003 Dec 1;125(4):274-83.
  • [47] Woldesemayat MA, Ghajar AJ. Comparison of void fraction correlations for different flow patterns in horizontal and upward inclined pipes. International journal of multiphase flow. 2007 Apr 1;33(4):347-70.
  • [48] Woldesemayat MA. Comparison of void fraction correlations for two-phase flow in horizontal and upward inclined flows (Doctoral dissertation, Oklahoma State University). 2006 Retrieved from https://shareok.org/bitstream/handle/11244/10090/Woldesemayat_okstate_0664M_1784.pdf?sequence=1
  • [49] Ewim DR, Meyer JP. Pressure drop during condensation at low mass fluxes in smooth horizontal and inclined tubes. International Journal of Heat and Mass Transfer. 2019 Apr 1;133:686-701.
  • [50] Mozafari M, Akhavan-Behabadi MA, Qobadi-Arfaee H, Fakoor-Pakdaman M. Condensation and pressure drop characteristics of R600a in a helical tube-in-tube heat exchanger at different inclination angles. Applied Thermal Engineering. 2015 Nov 5;90:571-8.
  • [51] Li S, Jiang Y, Cai W, Li Q, Zhang H, Ren Y. The influence of structural parameters on heat transfer and pressure drop for hydrocarbon mixture refrigerant during condensation in enhanced spiral pipes. AppliedThermal Engineering. 2018 Jul 25;140:759-74.
  • [52] Jung D, Song KH, Cho Y, Kim SJ. Flow condensation heat transfer coefficients of pure refrigerants. International Journal of Refrigeration. 2003 Jan 1;26(1):4-11.
  • [53] Zyhowski G, Brown A. Low global warming fluids for replacement of HFC-245fa and HFC-134a in ORC applications. InHoneywell report, ORC2011 seminar, TU Delft in Netherlands 2011 Sep 23.
  • [54] Ghim G, Lee J. Condensation heat transfer of low GWP ORC working fluids in a horizontal smooth tube. International Journal of Heat and Mass Transfer. 2017 Jan 1;104:718-28.
  • [55] Kim SM, Mudawar I. Flow condensation in parallel micro-channels–Part 2: Heat transfer results and correlation technique. International Journal of Heat and Mass Transfer. 2012 Jan 31;55(4):984-94.
  • [56] Oh HK, Son CH. Condensation heat transfer characteristics of R-22, R-134a and R-410A in a single circular microtube. Experimental thermal and fluid science. 2011 May 1;35(4):706-16.
  • [57] Yang Y, Jia L. Experimental investigation on heat transfer coefficient during upward flow condensation of R410A in vertical smooth tubes. Journal of Thermal Science. 2015 Apr 1;24(2):155-63.
  • [58] Kondou C, Mishima F, Koyama S. Condensation and evaporation of R32/R1234ze (E) and R744/R32/R1234ze (E) flow in horizontal microfin tubes. Science and Technology for the Built Environment. 2015 Jul 4;21(5):564-77.
  • [59] Diani A, Cavallini A, Rossetto L. R1234yf condensation inside a 3.4 mm ID horizontal microfin tube. International Journal of Refrigeration. 2017 Mar 1;75:178-89.
  • [60] Arslan G, Eskin N. Forced Convective Condensation of R134A Vapor Inside a Vertical Microfin Tube. Experimental Heat Transfer. 2016 Nov 1;29(6):707-20.
  • [61] Miyara A, Nonaka K, Taniguchi M. Condensation heat transfer and flow pattern inside a herringbonetype micro-fin tube. International journal of refrigeration. 2000 Mar 1;23(2):141-52.
  • [62] Yarmohammadi S, Farhadi M. Optimization of thermal and flow characteristics of R-404A vapor condensation inside corrugated tubes. Experimental Thermal and Fluid Science. 2016 Dec 1;79:1-12.
  • [63] Li M, Guo Q, Lv J, Li D. Research on condensation heat transfer characteristics of R447A, R1234ze, R134a and R32 in multi-port micro-channel tubes. International Journal of Heat and Mass Transfer. 2018 Mar 1;118:637-50.
  • [64] Meyer JP, Ewim DR. Heat transfer coefficients during the condensation of low mass fluxes in smooth horizontal tubes. International Journal of Multiphase Flow. 2018 Feb 1;99:485-99.
  • [65] Akers WW, Deans HA, Crosser OK. Condensing heat transfer within horizontal tubes. Chem. Eng. Progr..1958 Oct 1;54.
  • [66] Lips S, Meyer JP. Experimental study of convective condensation in an inclined smooth tube. Part I: Inclination effect on flow pattern and heat transfer coefficient. International Journal of Heat and Mass Transfer. 2012 Jan 15;55(1-3):395-404.
  • [67] Adelaja AO, Ewim DR, Dirker J, Meyer JP. An improved heat transfer correlation for condensation inside inclined smooth tubes. International Communications in Heat and Mass Transfer. 2020 Oct 1;117:104746.
  • [68] Adelaja AO, Dirker J, Meyer JP. Convective condensation heat transfer of R134a in tubes at different inclination angles. International Journal of Green Energy. 2016 Jun 20;13(8):812-21.
  • [69] Mohseni SG, Akhavan-Behabadi MA, Saeedinia M. Flow pattern visualization and heat transfer characteristics of R-134a during condensation inside a smooth tube with different tube inclinations. International Journal of Heat and Mass Transfer. 2013 May 1;60:598-602.
  • [70] Xing F, Xu J, Xie J, Liu H, Wang Z, Ma X. Froude number dominates condensation heat transfer of R245fa in tubes: effect of inclination angles. International Journal of Multiphase Flow. 2015 May 1;71:98-115.
  • [71] Wang JC, Ma Y. Condensation heat transfer inside vertical and inclined thermosyphons. J. Heat Transfer. 1991 Aug 1;113(3):777-80.
  • [72] Wang BX, Du XZ. Study on laminar film-wise condensation for vapor flow in an inclined small/minidiameter tube. International journal of heat and mass transfer. 2000 May 15;43(10):1859-68.
  • [73] Yang JG, Ju XL, Ye S. An empirical correlation for steam condensing and flowing downward in a 50mm diameter inclined tube. In Advanced Materials Research 2013 (Vol. 732, pp. 67-73). Trans Tech Publications Ltd.
  • [74] Hussein HM, Mohamad MA, El-Asfouri AS. Theoretical analysis of laminar-film condensation heat transfer inside inclined wickless heat pipes flat-plate solar collector. Renewable Energy. 2001 Jul 1;23(3-4):525-35.
  • [75] Shah MM. An improved and extended general correlation for heat transfer during condensation in plain tubes. Hvac&R Research. 2009 Sep 1;15(5):889-913.
  • [76] Shah MM. Comprehensive correlations for heat transfer during condensation in conventional and mini/micro channels in all orientations. International journal of refrigeration. 2016 Jul 1;67:22-41.
  • [77] Camaraza-Medina Y, Hernandez-Guerrero A, Luviano-Ortiz JL, Mortensen-Carlson K, Cruz-Fonticiella OM, García-Morales OF. New model for heat transfer calculation during film condensation inside pipes. International Journal of Heat and Mass Transfer. 2019 Jan 1;128:344-53.
  • [78] Ewim DR, Meyer JP, Abadi SN. Condensation heat transfer coefficients in an inclined smooth tube at low mass fluxes. International Journal of Heat and Mass Transfer. 2018 Aug 1;123:455-67.
  • [79] Akhavan-Behabadi MA, Kumar R, Mohseni SG. Condensation heat transfer of R-134a inside a microfin tube with different tube inclinations. International Journal of Heat and Mass Transfer. 2007 Nov 1;50(23-24):4864-71.
  • [80] Adelaja AO, Ewim DR, Dirker J, Meyer JP. Heat transfer, void fraction and pressure drop during condensation inside inclined smooth and microfin tubes. Experimental Thermal and Fluid Science. 2019 Dec 1;109:109905.
  • [81] Khoeini, D., Akhavan-Behabadi, M. A., & Saboonchi, A. (2012). Experimental study of condensation heat transfer of R-134a flow in corrugated tubes with different inclinations. International Communications in Heat and Mass Transfer, 39(1), 138-143.
  • [82] Yildiz, S., Duymaz, G., Ziegler, F., & Auracher, H. (2017). Heat transfer during reflux condensation of R134a inside a micro-fin tube with different tube inclinations. International Journal of Refrigeration, 74, 425-434.
  • [83] Ghiaasiaan, S. M. (2007). Two-phase flow, boiling, and condensation: in conventional and miniature systems. Cambridge University Press.
  • [84] Julia, J. E., & Hibiki, T. (2011). Flow regime transition criteria for two-phase flow in a vertical annulus. International Journal of Heat and Fluid Flow, 32(5), 993-1004.
  • [85] Jepson, D. M., Azzopardi, B. J., & Whalley, P. B. (1989). The effect of gas properties on drops in annular flow. International Journal of Multiphase Flow, 15(3), 327-339.
  • [86] Saisorn S, Kaew-On J, Wongwises S. An experimental investigation of flow boiling heat transfer of R-134a in horizontal and vertical mini-channels. Exp Therm Fluid Sci [Internet]. 2013;46:232–44. Available from: http://dx.doi.org/10.1016/j.expthermflusci.2012.12.015.
  • [87] Wongwises, S., & Pipathattakul, M. (2006). Flow pattern, pressure drop and void fraction of two-phase gas-liquid flow in an inclined narrow annular channel. Experimental Thermal and Fluid Science, 30(4), 345-354.
  • [88] Hernández, L., Julia, J. E., Ozar, B., Hibiki, T., & Ishii, M. (2011). Flow regime identification in boiling two-phase flow in a vertical annulus. Journal of Fluids Engineering, 133(9), 091304.
  • [89] Layssac, T., Lips, S., & Revellin, R. (2019). Effect of inclination on heat transfer coefficient during flow boiling in a mini-channel. International Journal of Heat and Mass Transfer, 132, 508-518.
  • [90] Krishnamurthy S, Peles Y. Flow boiling heat transfer on micro pin fins entrenched in a microchannel. Journal of Heat Transfer. 2010 Apr 1;132(4).
  • [91] Zhang H, Wang S, Wang J. Experimental study on boiling flow of liquid nitrogen in inclined tubes— Velocities and length distributions of Taylor bubbles. Journal of the Taiwan Institute of Chemical Engineers. 2009 Jul 1;40(4):431-8.
  • [92] Cornwell K, Kew PA. Boiling in small parallel channels. InEnergy Efficiency in Process Technology 1993 (pp. 624-638). Springer, Dordrecht.
  • [93] Kandlikar SG, Steinke ME, Tian S, Campbell LA. High speed photographic observation of flow boiling of water in parallel minichannels. In35th Proceedings of National Heat Transfer Conference 2001 Jun 10.
  • [94] Lakshminarasimhan MS, Hollingsworth DK, Witte LC. Boiling incipience in narrow channels. ASMEPUBLICATIONS-HTD. 2000;366:55-64.
  • [95] Sardeshpande MV, Ranade VV. Two-phase flow boiling in small channels: A brief review. Sadhana. 2013 Dec 1;38(6):1083-126.
  • [96] Brutin D, Tadrist L. Pressure drop and heat transfer analysis of flow boiling in a minichannel: influence of the inlet condition on two-phase flow stability. International journal of heat and mass transfer. 2004 May 1;47(10-11):2365-77.
  • [97] Zhang W, Hibiki T, Mishima K. Correlations of two-phase frictional pressure drop and void fraction in mini-channel. International Journal of Heat and Mass Transfer. 2010 Jan 15;53(1-3):453-65.
  • [98] Chisholm D. A theoretical basis for the Lockhart-Martinelli correlation for two-phase flow. International Journal of Heat and Mass Transfer. 1967 Dec 1;10(12):1767-78.
  • [99] Dukler AE, Wicks III M, Cleveland RG. Frictional pressure drop in two‐phase flow: B. An approach through similarity analysis. AIChE Journal. 1964 Jan;10(1):44-51.
  • [100] Mishima K, Hibiki T. Some characteristics of air-water two-phase flow in small diameter vertical tubes. International journal of multiphase flow. 1996 Aug 1;22(4):703-12.
  • [101] Celen A, Çebi A, Dalkılıç AS. Investigation of boiling heat transfer characteristics of R134a flowing in smooth and microfin tubes. International Communications in Heat and Mass Transfer. 2018 Apr 1;93:21-33.
  • [102] Tong W, Bergles AE, Jensen MK. Pressure drop with highly subcooled flow boiling in small-diameter tubes. Experimental Thermal and Fluid Science. 1997 Oct 1;15(3):202-12.
  • [103] Müller-Steinhagen H, Heck K. A simple friction pressure drop correlation for two-phase flow in pipes. Chemical Engineering and Processing: Process Intensification. 1986 Nov 1;20(6):297-308.
  • [104] Bandel J, Schlünder EU. Druckverlust und Wärmeübergang bei der Verdampfung siedender Kältemittel im durchströmten Rohr. Chemie Ingenieur Technik. 1973 Mar;45(6):345-50.
  • [105] Yan J, Guo P, Bi Q, Liu Z, Zhang Q, Yang Z. Pressure drop for highly subcooled water flow boiling under high heat and mass fluxes. Applied Thermal Engineering. 2017 Sep 1;124:1061-74.
  • [106] Tran TN, Chyu MC, Wambsganss MW, France DM. Two-phase pressure drop of refrigerants during flow boiling in small channels: an experimental investigation and correlation development. International Journal of Multiphase Flow. 2000 Nov 1;26(11):1739-54.
  • [107] Ribatski G, Wojtan L, Thome JR. An analysis of experimental data and prediction methods for two-phase frictional pressure drop and flow boiling heat transfer in micro-scale channels. Experimental Thermal and Fluid Science. 2006 Oct 1;31(1):1-9.
  • [108] Steinke ME, Kandlikar SG. Flow boiling and pressure drop in parallel flow microchannels. InInternational Conference on Nanochannels, Microchannels, and Minichannels 2003 Jan 1 (Vol. 36673, pp. 567-579).
  • [109] Yun R, Heo JH, Kim Y. Evaporative heat transfer and pressure drop of R410A in microchannels. International journal of refrigeration. 2006 Jan 1;29(1):92-100.
  • [110] Yan YY, Lin TF. Evaporation heat transfer and pressure drop of refrigerant R-134a in a small pipe. International Journal of Heat and Mass Transfer. 1998 Oct 1;41(24):4183-94.
  • [111] Mancin S, Diani A, Rossetto L. Experimental measurements of R134a flow boiling inside a 3.4-mm ID microfin tube. Heat Transfer Engineering. 2015 Sep 22;36(14-15):1218-29.
  • [112] Park CY, Hrnjak PS. CO2 and R410A flow boiling heat transfer, pressure drop, and flow pattern at low temperatures in a horizontal smooth tube. International Journal of Refrigeration. 2007 Jan 1;30(1):166-78.
  • [113] Friedel L. Improved friction pressure drop correlation for horizontal and vertical two-phase pipe flow. Proc. of European Two-Phase Flow Group Meet., Ispra, Italy, 1979. 1979.
  • [114] Kuo CS, Wang CC. Horizontal flow boiling of R22 and R407C in a 9.52 mm micro-fin tube. Applied Thermal Engineering. 1996 Aug 1;16(8-9):719-31.
  • [115] Rollmann P, Spindler K. New models for heat transfer and pressure drop during flow boiling of R407C and R410A in a horizontal microfin tube. International Journal of Thermal Sciences. 2016 May 1;103:57-66.
  • [116] Didi MO, Kattan N, Thome JR. Prediction of two-phase pressure gradients of refrigerants in horizontal tubes. International Journal of refrigeration. 2002 Nov 1;25(7):935-47.
  • [117] Kattan N. Contribution to the heat transfer analysis of substitute refrigerants in evaporator tubes with smooth or enhanced tube surfaces.(Doctoral thesis, Verlag nicht ermittelbar).
  • [118] Lockhart RW. Proposed correlation of data for isothermal two-phase, two-component flow in pipes. Chem. Eng. Prog.. 1949;45:39-48.
  • [119] Grönnerud R. Investigation of liquid hold-up, flow-resistance and heat transfer in circulation type evaporators, part IV: two-phase flow resistance in boiling refrigerants. Bull. De l’Inst. Du Froid, Annexe. 1972;1.
  • [120] Chisholm D. Pressure gradients due to friction during the flow of evaporating two-phase mixtures in smooth tubes and channels. International Journal of Heat and Mass Transfer. 1973 Feb 1;16(2):347-58.
  • [121] Bankoff SG. A variable density single-fluid model for two-phase flow with particular reference to steamwater flow. Journal of Heat Transfer (US). 1960 Nov 1;82.
  • [122] Chawla JM. Wärmeübergang und Druckabfall in waagerechten Rohren bei der Strömung von verdampfenden Kältemitteln. VDI-Verlag; 1967.
  • [123] Maddi MK, Rao DP. Experimental studies on flow boiling in inclined tubes: in the regions encountered in solar collectors. The Canadian Journal of Chemical Engineering. 1995 Feb;73(1):73-84.
  • [124] Wang CC, Chang WJ, Dai CH, Lin YT, Yang KS. Effect of inclination on the convective boiling performance of a microchannel heat sink using HFE-7100. Experimental thermal and fluid science. 2012 Jan 1;36:143-8.
  • [125] Jang Y, Park C, Lee Y, Kim Y. Flow boiling heat transfer coefficients and pressure drops of FC-72 in small channel heat sinks. International journal of refrigeration. 2008 Sep 1;31(6):1033-41.
  • [126] Tshuva M, Barnea D, Taitel Y. Two-phase flow in inclined parallel pipes. International journal of multiphase flow. 1999 Sep 1;25(6-7):1491-503.
  • [127] Laohalertdecha S, Wongwises S. An experimental study into the evaporation heat transfer and flow characteristics of R-134a refrigerant flowing through corrugated tubes. International journal of refrigeration. 2011 Jan 1;34(1):280-91.
  • [128] Piasecka M. Impact of selected parameters on refrigerant flow boiling heat transfer and pressure drop in minichannels. International Journal of Refrigeration. 2015 Aug 1;56:198-212.
  • [129] García-Cascales JR, Vera-García F, Corberán-Salvador JM, Gonzálvez-Maciá J. Assessment of boiling and condensation heat transfer correlations in the modelling of plate heat exchangers. International Journal of Refrigeration. 2007 Sep 1;30(6):1029-41.
  • [130] Dalkilic AS, Teke İ, Wongwises S. Heat transfer enhancement during downward laminar flow condensation of R134a in vertical smooth and microfin tubes. Isi Bilimi ve Teknigi Dergisi/Journal of Thermal Science & Technology. 2012 Jun 1;32(1).
  • [131] Akhavan-Behabadi MA, Mohseni SG, Razavinasab SM. Evaporation heat transfer of R-134a inside a microfin tube with different tube inclinations. Experimental thermal and fluid science. 2011 Sep 1;35(6):996-1001.
  • [132] Kandlikar SG. Fundamental issues related to flow boiling in minichannels and microchannels. Experimental Thermal and Fluid Science. 2002 Jun 1;26(2-4):389-407.
  • [133] Gungor KE, Winterton RH. A general correlation for flow boiling in tubes and annuli. International Journal of Heat and Mass Transfer. 1986 Mar 1;29(3):351-8.
  • [134] Cooper MG. Saturation nucleate pool boiling-a simple correlation. InIChemE Symp. Ser. 1984 (Vol. 86, p. 786).
  • [135] Özdemir MR. Single-phase flow and flow boiling of water in rectangular metallic microchannels (Doctoral dissertation, Brunel University London).
  • [136] Lazarek GM, Black SH. Evaporative heat transfer, pressure drop and critical heat flux in a small vertical tube with R-113. International Journal of Heat and Mass Transfer. 1982 Jul 1;25(7):945-60.
  • [137] Li W, Wu Z. A general correlation for adiabatic two-phase pressure drop in micro/mini-channels. International Journal of Heat and Mass Transfer. 2010 Jun 1;53(13-14):2732-9.
  • [138] Candan AY, Markal BU, Aydin OR, Avci ME. Saturated flow boiling characteristics in single rectangular minichannels: effect of aspect ratio. Experimental Heat Transfer. 2018 Nov 2;31(6):531-51.
  • [139] Markal B, Aydin O, Avci M. Effect of aspect ratio on saturated flow boiling in microchannels. International Journal of Heat and Mass Transfer. 2016 Feb 1;93:130-43.
  • [140] Markal B, Aydin O, Avci M. An experimental investigation of saturated flow boiling heat transfer and pressure drop in square microchannels. International Journal of Refrigeration. 2016 May 1;65:1-1.
  • [141] Nedaei M. Subcooled flow boiling heat transfer enhancement in microchannels/tubes with modifications of surface characteristics with micro/nano structures and films (Master’s dissertation).Retrieved from https://tez.yok.gov.tr/UlusalTezMerkezi/
  • [142] Kandlikar SG. A general correlation for saturated two-phase flow boiling heat transfer inside horizontal and vertical tubes.
  • [143] Passos JC, Kuser VF, Haberschill P, Lallemand M. Convective boiling of R-407c inside horizontal microfin and plain tubes. Experimental thermal and fluid science. 2003 Jul 1;27(6):705-13.
  • [144] Dalkılıç AS, Özman C, Sakamatapan K, Wongwises S. Experimental investigation on the flow boiling of R134a in a multi-microchannel heat sink. International Communications in Heat and Mass Transfer. 2018 Feb 1;91:125-37.
  • [145] Özdemir MR. Experimental study on single phase flow and boiling heat transfer in microchannels at high flow rates(Master’s dissertation). Retrieved from https://tez.yok.gov.tr/UlusalTezMerkezi/
  • [146] Wambsganss MW, France DM, Jendrzejczyk JA, Tran TN. Boiling heat transfer in a horizontal smalldiameter tube.
  • [147] Reid RS, Pate MB, Bergles AE. Evaporation of refrigerant 113 flowing inside smooth tubes. American Society of Mechanical Engineers, New York, NY; 1987 Jan 1.
  • [148] Tran TN, Wambsganss MW, France DM. Small circular-and rectangular-channel boiling with two refrigerants. International Journal of Multiphase Flow. 1996 Jun 1;22(3):485-98.
  • [149] Kasza KE, Didascalou T, Wambsganss MW. Microscale flow visualization of nucleate boiling in small channels: mechanisms influencing heat transfer. Argonne National Lab., IL (United States); 1997 Jul 1.
  • [150] Shiferaw D, Karayiannis TG, Kenning DB. Flow boiling in a 1.1 mm tube with R134a: Experimental results and comparison with model. International Journal of Thermal Sciences. 2009 Feb 1;48(2):331-41.
  • [151] Ravigururajan TS, Cuta J, McDonald CE, Drost MK. Effects of heat flux on two-phase flow characteristics of refrigerant flows in a micro-channel heat exchanger. American Society of Mechanical Engineers, New York, NY (United States); 1996 Dec 31.
  • [152] Kundu A, Kumar R, Gupta A. Flow boiling heat transfer characteristics of R407C inside a smooth tube with different tube inclinations. International journal of refrigeration. 2014 Sep 1;45:1-2.
  • [153] Kundu A, Kumar R, Gupta A. Evaporative heat transfer of R134a and R407C inside a smooth tube with different inclinations. International Journal of Heat and Mass Transfer. 2014 Sep 1;76:523-33.
  • [154] Gang W, Bi Q, Wang H, Yang Z, Zhu X, Hu Z. Forced convection heat transfer using high temperature and pressure water in an upward-inclined tube. Journal of heat transfer. 2012 Feb 1;134(2).
  • [155] Morcos SM, Mobarak A, Hilal M, Mohareb MR. Boiling heat transfer in horizontal and inclined rectangular channels.
  • [156] Wang S, Yang D, Xie B, Wang L, Wang Y. Experimental investigation on heat transfer characteristics of water in inclined downward tube of a supercritical pressure CFB boiler. Journal of Thermal Science. 2015 Oct;24(5):478-87.
  • [157] Jeong U, Kim SJ. Subcooling effect on boiling heat transfer of inclined downward-facing surface under low flow and pressure. International Journal of Heat and Mass Transfer. 2018 Dec 1;127:182-95.
Year 2021, , 483 - 549, 01.03.2021
https://doi.org/10.18186/thermal.887821

Abstract

References

  • [1] In S, Jeong S. Flow boiling heat transfer characteristics of R123 and R134a in a micro-channel. International Journal of Multiphase Flow. 2009 Nov 1;35(11):987-1000.
  • [2] Ong CL, Thome JR. Flow boiling heat transfer of R134a, R236fa and R245fa in a horizontal 1.030 mm circular channel. Experimental Thermal and Fluid Science. 2009 Apr 1;33(4):651-63.
  • [3] Li W, Ma X, Sun ZC, He Y, Sherif SA, Zhang JH, Zhu HT. Evaporation heat transfer characteristics ofR410A inside horizontal three-dimensional enhanced tubes. International Journal of Thermal Sciences. 2019 Mar 1;137:456-66.
  • [4] Akhavan-Behabadi MA, Esmailpour M. Experimental study of evaporation heat transfer of R-134a inside a corrugated tube with different tube inclinations. international communications in heat and mass transfer. 2014 Jul 1;55:8-14.
  • [5] Mohseni SG, Akhavan-Behabadi MA. Visual study of flow patterns during condensation inside a microfin tube with different tube inclinations. International communications in heat and mass transfer. 2011 Oct 1;38(8):1156-61.
  • [6] Yu J, Jiang Y, Cai W, Li X, Zhu Z. Condensation flow patterns and heat transfer correction for zeotropic hydrocarbon mixtures in a helically coiled tube. International Journal of Heat and Mass Transfer. 2019 Nov 1;143:118500.
  • [7] Estellé P, Cabaleiro D, Żyła G, Lugo L, Murshed SS. Current trends in surface tension and wetting behavior of nanofluids. Renewable and Sustainable Energy Reviews. 2018 Oct 1;94:931-44.
  • [8] Saisorn S, Wongwises S. The effects of channel diameter on flow pattern, void fraction and pressure drop of two-phase air–water flow in circular micro-channels. Experimental thermal and fluid science. 2010 May 1;34(4):454-62.
  • [9] Lips S, Meyer JP. Two-phase flow in inclined tubes with specific reference to condensation: a review. International Journal of Multiphase Flow. 2011 Oct 1;37(8):845-59.
  • [10] Barnea D. A unified model for predicting flow-pattern transitions for the whole range of pipe inclinations. International Journal of Multiphase Flow. 1987 Jan 1;13(1):1-2.
  • [11] Nitheanandan T, Soliman HM. Influence of tube inclination on the flow regime boundaries of condensing steam. The Canadian Journal of Chemical Engineering. 1993 Feb;71(1):35-41.
  • [12] Wang WC, Ma XH, Wei ZD, Yu P. Two-phase flow patterns and transition characteristics for in-tube condensation with different surface inclinations. International journal of heat and mass transfer. 1998 Oct 1;41(24):4341-9.
  • [13] Ghajar AJ, Tang CC. Heat transfer measurements, flow pattern maps, and flow visualization for nonboiling two-phase flow in horizontal and slightly inclined pipe. Heat Transfer Engineering. 2007 Jun 1;28(6):525-40.
  • [14] Kang Y, Davies III WA, Hrnjak P, Jacobi AM. Effect of inclination on pressure drop and flow regimes in large flattened-tube steam condensers. Applied Thermal Engineering. 2017 Aug 1;123:498-513.
  • [15] Davies III WA, Hrnjak P. Heat transfer in a large, inclined, flattened-tube steam condenser. Heat Transfer Engineering. 2020 Sep 24;41(17):1443-56.
  • [16] Cao S, Ji X, Xu J. R245fa condensation heat transfer in a phase separation condenser. Experimental Thermal and Fluid Science. 2018 Nov 1;98:346-61.
  • [17] Lips S, Meyer JP. Effect of gravity forces on heat transfer and pressure drop during condensation of R134a. Microgravity Science and Technology. 2012 Jun;24(3):157-64.
  • [18] Barbosa Jr JR, Ferreira JC, Hense D. Onset of flow reversal in upflow condensation in an inclinable tube. Experimental Thermal and Fluid Science. 2016 Oct 1;77:55-70.
  • [19] Hanafizadeh P, Hojati A, Karimi A. Experimental investigation of oil–water two phase flow regime in an inclined pipe. Journal of Petroleum Science and Engineering. 2015 Dec 1;136:12-22.
  • [20] Mozafari M, Akhavan-Behabadi MA, Qobadi-Arfaee H, Hanafizadeh P, Fakoor-Pakdaman M. Experimental study on condensation flow patterns inside inclined U-bend tubes. Experimental Thermal and Fluid Science. 2015 Nov 1;68:276-87.
  • [21] Xiao J, Hrnjak P. A new flow regime map and void fraction model based on the flow characterization of condensation. International Journal of Heat and Mass Transfer. 2017 May 1;108:443-52.
  • [22] Park I, Mudawar I. Climbing film, flooding and falling film behavior in upflow condensation in tubes. International Journal of Heat and Mass Transfer. 2013 Oct 1;65:44-61.
  • [23] El Hajal J, Thome JR, Cavallini A. Condensation in horizontal tubes, part 1: two-phase flow pattern map. International Journal of Heat and Mass Transfer. 2003 Aug 1;46(18):3349-63.
  • [24] Thome JR, El Hajal J, Cavallini A. Condensation in horizontal tubes, part 2: new heat transfer model based on flow regimes. International journal of heat and mass transfer. 2003 Aug 1;46(18):3365-87.
  • [25] Aroonrat K, Wongwises S. Experimental study on two-phase condensation heat transfer and pressure drop of R-134a flowing in a dimpled tube. International Journal of Heat and Mass Transfer. 2017 Mar 1;106:437-48.
  • [26] Cavallini A, Censi G, Del Col D, Doretti L, Longo GA, Rossetto L. Experimental investigation on condensation heat transfer and pressure drop of new HFC refrigerants (R134a, R125, R32, R410A, R236ea) in a horizontal smooth tube. International Journal of Refrigeration. 2001 Jan 1;24(1):73-87.
  • [27] Nualboonrueng T, Wongwises S. Two-phase flow pressure drop of HFC-134a during condensation in smooth and micro-fin tubes at high mass flux. International communications in heat and mass transfer. 2004 Oct 1;31(7):991-1004.
  • [28] Briggs A, Kelemenis C, Rose JW. Heat transfer and pressure drop measurements for in-tube condensation of CFC-113 using microfin tubes and wire inserts. Experimental heat transfer. 2000 Jul 1;13(3):163-81.
  • [29] Macdonald M, Garimella S. Hydrocarbon condensation in horizontal smooth tubes: Part I–Measurements. International Journal of Heat and Mass Transfer. 2016 Feb 1;93:75-85.
  • [30] Macdonald M, Garimella S. Hydrocarbon condensation in horizontal smooth tubes: Part II–Heat transfer coefficient and pressure drop modeling. International Journal of Heat and Mass Transfer. 2016 Feb 1;93:1248-61.
  • [31] Kim SM, Kim J, Mudawar I. Flow condensation in parallel micro-channels–Part 1: Experimental results and assessment of pressure drop correlations. International journal of heat and mass transfer. 2012 Jan 31;55(4):971-83.
  • [32] Son CH, Oh HK. Condensation pressure drop of R22, R134a and R410A in a single circular microtube. Heat and Mass Transfer. 2012 Aug;48(8):1437-50.
  • [33] Liu N, Li JM, Sun J, Wang HS. Heat transfer and pressure drop during condensation of R152a in circular and square microchannels. Experimental thermal and fluid science. 2013 May 1;47:60-7.
  • [34] Laohalertdecha S, Wongwises S. The effects of corrugation pitch on the condensation heat transfer coefficient and pressure drop of R-134a inside horizontal corrugated tube. International Journal of Heat and Mass Transfer. 2010 Jun 1;53(13-14):2924-31.
  • [35] Salimpour MR, Yarmohammadi S. Effect of twisted tape inserts on pressure drop during R-404A condensation. International journal of refrigeration. 2012 Mar 1;35(2):263-9.
  • [36] Salimpour MR, Gholami H. Effect of inserting coiled wires on pressure drop of R-404A condensation. International journal of refrigeration. 2014 Apr 1;40:24-30.
  • [37] Lips S, Meyer JP. Experimental study of convective condensation in an inclined smooth tube. Part II: Inclination effect on pressure drops and void fractions. International Journal of Heat and Mass Transfer. 2012 Jan 15;55(1-3):405-12.
  • [38] Lips S, Meyer JP. Stratified flow model for convective condensation in an inclined tube. International Journal of Heat and Fluid Flow. 2012 Aug 1;36:83-91.
  • [39] Ahn TH, Yun BJ, Jeong JJ, Kang KH, Park YS, Cheon J, Jerng DW. Development of a new condensation model for the nearly-horizontal heat exchanger tube under the steam flowing conditions. International Journal of Heat and Mass Transfer. 2014 Dec 1;79:876-84.
  • [40] Ahn T, Kang J, Bae B, Jeong JJ, Yun B. Steam condensation in horizontal and inclined tubes under stratified flow conditions. International Journal of Heat and Mass Transfer. 2019 Oct 1;141:71-87.
  • [41] Würfel R, Kreutzer T, Fratzscher W. Turbulence transfer processes in adiabatic and condensing film flow in an inclined tube. Chemical Engineering & Technology: Industrial Chemistry‐Plant Equipment‐Process Engineering‐Biotechnology. 2003 Apr 9;26(4):439-48.
  • [42] Grolman E, Fortuin JM. Gas-liquid flow in slightly inclined pipes. Chemical engineering science. 1997 Dec 1;52(24):4461-71.
  • [43] Grolman E. Gas-Liquid Flow with Low Liquid Loading in Slightly Inclined Pipes. (Doctoral thesis) 1994 Retrieved from https://www.worldcat.org/title/gas-liquid-flow-with-low-liquid-loading-inslightlyinclined-pipes/oclc/906984277#borrow
  • [44] Ottens M, Hoefsloot HC, Hamersma PJ. Correlations predicting liquid hold-up and pressure gradient in steady-state (nearly) horizontal co-current gas-liquid pipe flow. Chemical Engineering Research and Design. 2001 Jul 1;79(5):581-92.
  • [45] Zhang HQ, Wang Q, Sarica C, Brill JP. Unified model for gas-liquid pipe flow via slug dynamics—part 1: model development. J. Energy Resour. Technol.. 2003 Dec 1;125(4):266-73.
  • [46] Zhang HQ, Wang Q, Sarica C, Brill JP. Unified model for gas-liquid pipe flow via slug dynamics—Part 2: Model validation. J. Energy Resour. Technol.. 2003 Dec 1;125(4):274-83.
  • [47] Woldesemayat MA, Ghajar AJ. Comparison of void fraction correlations for different flow patterns in horizontal and upward inclined pipes. International journal of multiphase flow. 2007 Apr 1;33(4):347-70.
  • [48] Woldesemayat MA. Comparison of void fraction correlations for two-phase flow in horizontal and upward inclined flows (Doctoral dissertation, Oklahoma State University). 2006 Retrieved from https://shareok.org/bitstream/handle/11244/10090/Woldesemayat_okstate_0664M_1784.pdf?sequence=1
  • [49] Ewim DR, Meyer JP. Pressure drop during condensation at low mass fluxes in smooth horizontal and inclined tubes. International Journal of Heat and Mass Transfer. 2019 Apr 1;133:686-701.
  • [50] Mozafari M, Akhavan-Behabadi MA, Qobadi-Arfaee H, Fakoor-Pakdaman M. Condensation and pressure drop characteristics of R600a in a helical tube-in-tube heat exchanger at different inclination angles. Applied Thermal Engineering. 2015 Nov 5;90:571-8.
  • [51] Li S, Jiang Y, Cai W, Li Q, Zhang H, Ren Y. The influence of structural parameters on heat transfer and pressure drop for hydrocarbon mixture refrigerant during condensation in enhanced spiral pipes. AppliedThermal Engineering. 2018 Jul 25;140:759-74.
  • [52] Jung D, Song KH, Cho Y, Kim SJ. Flow condensation heat transfer coefficients of pure refrigerants. International Journal of Refrigeration. 2003 Jan 1;26(1):4-11.
  • [53] Zyhowski G, Brown A. Low global warming fluids for replacement of HFC-245fa and HFC-134a in ORC applications. InHoneywell report, ORC2011 seminar, TU Delft in Netherlands 2011 Sep 23.
  • [54] Ghim G, Lee J. Condensation heat transfer of low GWP ORC working fluids in a horizontal smooth tube. International Journal of Heat and Mass Transfer. 2017 Jan 1;104:718-28.
  • [55] Kim SM, Mudawar I. Flow condensation in parallel micro-channels–Part 2: Heat transfer results and correlation technique. International Journal of Heat and Mass Transfer. 2012 Jan 31;55(4):984-94.
  • [56] Oh HK, Son CH. Condensation heat transfer characteristics of R-22, R-134a and R-410A in a single circular microtube. Experimental thermal and fluid science. 2011 May 1;35(4):706-16.
  • [57] Yang Y, Jia L. Experimental investigation on heat transfer coefficient during upward flow condensation of R410A in vertical smooth tubes. Journal of Thermal Science. 2015 Apr 1;24(2):155-63.
  • [58] Kondou C, Mishima F, Koyama S. Condensation and evaporation of R32/R1234ze (E) and R744/R32/R1234ze (E) flow in horizontal microfin tubes. Science and Technology for the Built Environment. 2015 Jul 4;21(5):564-77.
  • [59] Diani A, Cavallini A, Rossetto L. R1234yf condensation inside a 3.4 mm ID horizontal microfin tube. International Journal of Refrigeration. 2017 Mar 1;75:178-89.
  • [60] Arslan G, Eskin N. Forced Convective Condensation of R134A Vapor Inside a Vertical Microfin Tube. Experimental Heat Transfer. 2016 Nov 1;29(6):707-20.
  • [61] Miyara A, Nonaka K, Taniguchi M. Condensation heat transfer and flow pattern inside a herringbonetype micro-fin tube. International journal of refrigeration. 2000 Mar 1;23(2):141-52.
  • [62] Yarmohammadi S, Farhadi M. Optimization of thermal and flow characteristics of R-404A vapor condensation inside corrugated tubes. Experimental Thermal and Fluid Science. 2016 Dec 1;79:1-12.
  • [63] Li M, Guo Q, Lv J, Li D. Research on condensation heat transfer characteristics of R447A, R1234ze, R134a and R32 in multi-port micro-channel tubes. International Journal of Heat and Mass Transfer. 2018 Mar 1;118:637-50.
  • [64] Meyer JP, Ewim DR. Heat transfer coefficients during the condensation of low mass fluxes in smooth horizontal tubes. International Journal of Multiphase Flow. 2018 Feb 1;99:485-99.
  • [65] Akers WW, Deans HA, Crosser OK. Condensing heat transfer within horizontal tubes. Chem. Eng. Progr..1958 Oct 1;54.
  • [66] Lips S, Meyer JP. Experimental study of convective condensation in an inclined smooth tube. Part I: Inclination effect on flow pattern and heat transfer coefficient. International Journal of Heat and Mass Transfer. 2012 Jan 15;55(1-3):395-404.
  • [67] Adelaja AO, Ewim DR, Dirker J, Meyer JP. An improved heat transfer correlation for condensation inside inclined smooth tubes. International Communications in Heat and Mass Transfer. 2020 Oct 1;117:104746.
  • [68] Adelaja AO, Dirker J, Meyer JP. Convective condensation heat transfer of R134a in tubes at different inclination angles. International Journal of Green Energy. 2016 Jun 20;13(8):812-21.
  • [69] Mohseni SG, Akhavan-Behabadi MA, Saeedinia M. Flow pattern visualization and heat transfer characteristics of R-134a during condensation inside a smooth tube with different tube inclinations. International Journal of Heat and Mass Transfer. 2013 May 1;60:598-602.
  • [70] Xing F, Xu J, Xie J, Liu H, Wang Z, Ma X. Froude number dominates condensation heat transfer of R245fa in tubes: effect of inclination angles. International Journal of Multiphase Flow. 2015 May 1;71:98-115.
  • [71] Wang JC, Ma Y. Condensation heat transfer inside vertical and inclined thermosyphons. J. Heat Transfer. 1991 Aug 1;113(3):777-80.
  • [72] Wang BX, Du XZ. Study on laminar film-wise condensation for vapor flow in an inclined small/minidiameter tube. International journal of heat and mass transfer. 2000 May 15;43(10):1859-68.
  • [73] Yang JG, Ju XL, Ye S. An empirical correlation for steam condensing and flowing downward in a 50mm diameter inclined tube. In Advanced Materials Research 2013 (Vol. 732, pp. 67-73). Trans Tech Publications Ltd.
  • [74] Hussein HM, Mohamad MA, El-Asfouri AS. Theoretical analysis of laminar-film condensation heat transfer inside inclined wickless heat pipes flat-plate solar collector. Renewable Energy. 2001 Jul 1;23(3-4):525-35.
  • [75] Shah MM. An improved and extended general correlation for heat transfer during condensation in plain tubes. Hvac&R Research. 2009 Sep 1;15(5):889-913.
  • [76] Shah MM. Comprehensive correlations for heat transfer during condensation in conventional and mini/micro channels in all orientations. International journal of refrigeration. 2016 Jul 1;67:22-41.
  • [77] Camaraza-Medina Y, Hernandez-Guerrero A, Luviano-Ortiz JL, Mortensen-Carlson K, Cruz-Fonticiella OM, García-Morales OF. New model for heat transfer calculation during film condensation inside pipes. International Journal of Heat and Mass Transfer. 2019 Jan 1;128:344-53.
  • [78] Ewim DR, Meyer JP, Abadi SN. Condensation heat transfer coefficients in an inclined smooth tube at low mass fluxes. International Journal of Heat and Mass Transfer. 2018 Aug 1;123:455-67.
  • [79] Akhavan-Behabadi MA, Kumar R, Mohseni SG. Condensation heat transfer of R-134a inside a microfin tube with different tube inclinations. International Journal of Heat and Mass Transfer. 2007 Nov 1;50(23-24):4864-71.
  • [80] Adelaja AO, Ewim DR, Dirker J, Meyer JP. Heat transfer, void fraction and pressure drop during condensation inside inclined smooth and microfin tubes. Experimental Thermal and Fluid Science. 2019 Dec 1;109:109905.
  • [81] Khoeini, D., Akhavan-Behabadi, M. A., & Saboonchi, A. (2012). Experimental study of condensation heat transfer of R-134a flow in corrugated tubes with different inclinations. International Communications in Heat and Mass Transfer, 39(1), 138-143.
  • [82] Yildiz, S., Duymaz, G., Ziegler, F., & Auracher, H. (2017). Heat transfer during reflux condensation of R134a inside a micro-fin tube with different tube inclinations. International Journal of Refrigeration, 74, 425-434.
  • [83] Ghiaasiaan, S. M. (2007). Two-phase flow, boiling, and condensation: in conventional and miniature systems. Cambridge University Press.
  • [84] Julia, J. E., & Hibiki, T. (2011). Flow regime transition criteria for two-phase flow in a vertical annulus. International Journal of Heat and Fluid Flow, 32(5), 993-1004.
  • [85] Jepson, D. M., Azzopardi, B. J., & Whalley, P. B. (1989). The effect of gas properties on drops in annular flow. International Journal of Multiphase Flow, 15(3), 327-339.
  • [86] Saisorn S, Kaew-On J, Wongwises S. An experimental investigation of flow boiling heat transfer of R-134a in horizontal and vertical mini-channels. Exp Therm Fluid Sci [Internet]. 2013;46:232–44. Available from: http://dx.doi.org/10.1016/j.expthermflusci.2012.12.015.
  • [87] Wongwises, S., & Pipathattakul, M. (2006). Flow pattern, pressure drop and void fraction of two-phase gas-liquid flow in an inclined narrow annular channel. Experimental Thermal and Fluid Science, 30(4), 345-354.
  • [88] Hernández, L., Julia, J. E., Ozar, B., Hibiki, T., & Ishii, M. (2011). Flow regime identification in boiling two-phase flow in a vertical annulus. Journal of Fluids Engineering, 133(9), 091304.
  • [89] Layssac, T., Lips, S., & Revellin, R. (2019). Effect of inclination on heat transfer coefficient during flow boiling in a mini-channel. International Journal of Heat and Mass Transfer, 132, 508-518.
  • [90] Krishnamurthy S, Peles Y. Flow boiling heat transfer on micro pin fins entrenched in a microchannel. Journal of Heat Transfer. 2010 Apr 1;132(4).
  • [91] Zhang H, Wang S, Wang J. Experimental study on boiling flow of liquid nitrogen in inclined tubes— Velocities and length distributions of Taylor bubbles. Journal of the Taiwan Institute of Chemical Engineers. 2009 Jul 1;40(4):431-8.
  • [92] Cornwell K, Kew PA. Boiling in small parallel channels. InEnergy Efficiency in Process Technology 1993 (pp. 624-638). Springer, Dordrecht.
  • [93] Kandlikar SG, Steinke ME, Tian S, Campbell LA. High speed photographic observation of flow boiling of water in parallel minichannels. In35th Proceedings of National Heat Transfer Conference 2001 Jun 10.
  • [94] Lakshminarasimhan MS, Hollingsworth DK, Witte LC. Boiling incipience in narrow channels. ASMEPUBLICATIONS-HTD. 2000;366:55-64.
  • [95] Sardeshpande MV, Ranade VV. Two-phase flow boiling in small channels: A brief review. Sadhana. 2013 Dec 1;38(6):1083-126.
  • [96] Brutin D, Tadrist L. Pressure drop and heat transfer analysis of flow boiling in a minichannel: influence of the inlet condition on two-phase flow stability. International journal of heat and mass transfer. 2004 May 1;47(10-11):2365-77.
  • [97] Zhang W, Hibiki T, Mishima K. Correlations of two-phase frictional pressure drop and void fraction in mini-channel. International Journal of Heat and Mass Transfer. 2010 Jan 15;53(1-3):453-65.
  • [98] Chisholm D. A theoretical basis for the Lockhart-Martinelli correlation for two-phase flow. International Journal of Heat and Mass Transfer. 1967 Dec 1;10(12):1767-78.
  • [99] Dukler AE, Wicks III M, Cleveland RG. Frictional pressure drop in two‐phase flow: B. An approach through similarity analysis. AIChE Journal. 1964 Jan;10(1):44-51.
  • [100] Mishima K, Hibiki T. Some characteristics of air-water two-phase flow in small diameter vertical tubes. International journal of multiphase flow. 1996 Aug 1;22(4):703-12.
  • [101] Celen A, Çebi A, Dalkılıç AS. Investigation of boiling heat transfer characteristics of R134a flowing in smooth and microfin tubes. International Communications in Heat and Mass Transfer. 2018 Apr 1;93:21-33.
  • [102] Tong W, Bergles AE, Jensen MK. Pressure drop with highly subcooled flow boiling in small-diameter tubes. Experimental Thermal and Fluid Science. 1997 Oct 1;15(3):202-12.
  • [103] Müller-Steinhagen H, Heck K. A simple friction pressure drop correlation for two-phase flow in pipes. Chemical Engineering and Processing: Process Intensification. 1986 Nov 1;20(6):297-308.
  • [104] Bandel J, Schlünder EU. Druckverlust und Wärmeübergang bei der Verdampfung siedender Kältemittel im durchströmten Rohr. Chemie Ingenieur Technik. 1973 Mar;45(6):345-50.
  • [105] Yan J, Guo P, Bi Q, Liu Z, Zhang Q, Yang Z. Pressure drop for highly subcooled water flow boiling under high heat and mass fluxes. Applied Thermal Engineering. 2017 Sep 1;124:1061-74.
  • [106] Tran TN, Chyu MC, Wambsganss MW, France DM. Two-phase pressure drop of refrigerants during flow boiling in small channels: an experimental investigation and correlation development. International Journal of Multiphase Flow. 2000 Nov 1;26(11):1739-54.
  • [107] Ribatski G, Wojtan L, Thome JR. An analysis of experimental data and prediction methods for two-phase frictional pressure drop and flow boiling heat transfer in micro-scale channels. Experimental Thermal and Fluid Science. 2006 Oct 1;31(1):1-9.
  • [108] Steinke ME, Kandlikar SG. Flow boiling and pressure drop in parallel flow microchannels. InInternational Conference on Nanochannels, Microchannels, and Minichannels 2003 Jan 1 (Vol. 36673, pp. 567-579).
  • [109] Yun R, Heo JH, Kim Y. Evaporative heat transfer and pressure drop of R410A in microchannels. International journal of refrigeration. 2006 Jan 1;29(1):92-100.
  • [110] Yan YY, Lin TF. Evaporation heat transfer and pressure drop of refrigerant R-134a in a small pipe. International Journal of Heat and Mass Transfer. 1998 Oct 1;41(24):4183-94.
  • [111] Mancin S, Diani A, Rossetto L. Experimental measurements of R134a flow boiling inside a 3.4-mm ID microfin tube. Heat Transfer Engineering. 2015 Sep 22;36(14-15):1218-29.
  • [112] Park CY, Hrnjak PS. CO2 and R410A flow boiling heat transfer, pressure drop, and flow pattern at low temperatures in a horizontal smooth tube. International Journal of Refrigeration. 2007 Jan 1;30(1):166-78.
  • [113] Friedel L. Improved friction pressure drop correlation for horizontal and vertical two-phase pipe flow. Proc. of European Two-Phase Flow Group Meet., Ispra, Italy, 1979. 1979.
  • [114] Kuo CS, Wang CC. Horizontal flow boiling of R22 and R407C in a 9.52 mm micro-fin tube. Applied Thermal Engineering. 1996 Aug 1;16(8-9):719-31.
  • [115] Rollmann P, Spindler K. New models for heat transfer and pressure drop during flow boiling of R407C and R410A in a horizontal microfin tube. International Journal of Thermal Sciences. 2016 May 1;103:57-66.
  • [116] Didi MO, Kattan N, Thome JR. Prediction of two-phase pressure gradients of refrigerants in horizontal tubes. International Journal of refrigeration. 2002 Nov 1;25(7):935-47.
  • [117] Kattan N. Contribution to the heat transfer analysis of substitute refrigerants in evaporator tubes with smooth or enhanced tube surfaces.(Doctoral thesis, Verlag nicht ermittelbar).
  • [118] Lockhart RW. Proposed correlation of data for isothermal two-phase, two-component flow in pipes. Chem. Eng. Prog.. 1949;45:39-48.
  • [119] Grönnerud R. Investigation of liquid hold-up, flow-resistance and heat transfer in circulation type evaporators, part IV: two-phase flow resistance in boiling refrigerants. Bull. De l’Inst. Du Froid, Annexe. 1972;1.
  • [120] Chisholm D. Pressure gradients due to friction during the flow of evaporating two-phase mixtures in smooth tubes and channels. International Journal of Heat and Mass Transfer. 1973 Feb 1;16(2):347-58.
  • [121] Bankoff SG. A variable density single-fluid model for two-phase flow with particular reference to steamwater flow. Journal of Heat Transfer (US). 1960 Nov 1;82.
  • [122] Chawla JM. Wärmeübergang und Druckabfall in waagerechten Rohren bei der Strömung von verdampfenden Kältemitteln. VDI-Verlag; 1967.
  • [123] Maddi MK, Rao DP. Experimental studies on flow boiling in inclined tubes: in the regions encountered in solar collectors. The Canadian Journal of Chemical Engineering. 1995 Feb;73(1):73-84.
  • [124] Wang CC, Chang WJ, Dai CH, Lin YT, Yang KS. Effect of inclination on the convective boiling performance of a microchannel heat sink using HFE-7100. Experimental thermal and fluid science. 2012 Jan 1;36:143-8.
  • [125] Jang Y, Park C, Lee Y, Kim Y. Flow boiling heat transfer coefficients and pressure drops of FC-72 in small channel heat sinks. International journal of refrigeration. 2008 Sep 1;31(6):1033-41.
  • [126] Tshuva M, Barnea D, Taitel Y. Two-phase flow in inclined parallel pipes. International journal of multiphase flow. 1999 Sep 1;25(6-7):1491-503.
  • [127] Laohalertdecha S, Wongwises S. An experimental study into the evaporation heat transfer and flow characteristics of R-134a refrigerant flowing through corrugated tubes. International journal of refrigeration. 2011 Jan 1;34(1):280-91.
  • [128] Piasecka M. Impact of selected parameters on refrigerant flow boiling heat transfer and pressure drop in minichannels. International Journal of Refrigeration. 2015 Aug 1;56:198-212.
  • [129] García-Cascales JR, Vera-García F, Corberán-Salvador JM, Gonzálvez-Maciá J. Assessment of boiling and condensation heat transfer correlations in the modelling of plate heat exchangers. International Journal of Refrigeration. 2007 Sep 1;30(6):1029-41.
  • [130] Dalkilic AS, Teke İ, Wongwises S. Heat transfer enhancement during downward laminar flow condensation of R134a in vertical smooth and microfin tubes. Isi Bilimi ve Teknigi Dergisi/Journal of Thermal Science & Technology. 2012 Jun 1;32(1).
  • [131] Akhavan-Behabadi MA, Mohseni SG, Razavinasab SM. Evaporation heat transfer of R-134a inside a microfin tube with different tube inclinations. Experimental thermal and fluid science. 2011 Sep 1;35(6):996-1001.
  • [132] Kandlikar SG. Fundamental issues related to flow boiling in minichannels and microchannels. Experimental Thermal and Fluid Science. 2002 Jun 1;26(2-4):389-407.
  • [133] Gungor KE, Winterton RH. A general correlation for flow boiling in tubes and annuli. International Journal of Heat and Mass Transfer. 1986 Mar 1;29(3):351-8.
  • [134] Cooper MG. Saturation nucleate pool boiling-a simple correlation. InIChemE Symp. Ser. 1984 (Vol. 86, p. 786).
  • [135] Özdemir MR. Single-phase flow and flow boiling of water in rectangular metallic microchannels (Doctoral dissertation, Brunel University London).
  • [136] Lazarek GM, Black SH. Evaporative heat transfer, pressure drop and critical heat flux in a small vertical tube with R-113. International Journal of Heat and Mass Transfer. 1982 Jul 1;25(7):945-60.
  • [137] Li W, Wu Z. A general correlation for adiabatic two-phase pressure drop in micro/mini-channels. International Journal of Heat and Mass Transfer. 2010 Jun 1;53(13-14):2732-9.
  • [138] Candan AY, Markal BU, Aydin OR, Avci ME. Saturated flow boiling characteristics in single rectangular minichannels: effect of aspect ratio. Experimental Heat Transfer. 2018 Nov 2;31(6):531-51.
  • [139] Markal B, Aydin O, Avci M. Effect of aspect ratio on saturated flow boiling in microchannels. International Journal of Heat and Mass Transfer. 2016 Feb 1;93:130-43.
  • [140] Markal B, Aydin O, Avci M. An experimental investigation of saturated flow boiling heat transfer and pressure drop in square microchannels. International Journal of Refrigeration. 2016 May 1;65:1-1.
  • [141] Nedaei M. Subcooled flow boiling heat transfer enhancement in microchannels/tubes with modifications of surface characteristics with micro/nano structures and films (Master’s dissertation).Retrieved from https://tez.yok.gov.tr/UlusalTezMerkezi/
  • [142] Kandlikar SG. A general correlation for saturated two-phase flow boiling heat transfer inside horizontal and vertical tubes.
  • [143] Passos JC, Kuser VF, Haberschill P, Lallemand M. Convective boiling of R-407c inside horizontal microfin and plain tubes. Experimental thermal and fluid science. 2003 Jul 1;27(6):705-13.
  • [144] Dalkılıç AS, Özman C, Sakamatapan K, Wongwises S. Experimental investigation on the flow boiling of R134a in a multi-microchannel heat sink. International Communications in Heat and Mass Transfer. 2018 Feb 1;91:125-37.
  • [145] Özdemir MR. Experimental study on single phase flow and boiling heat transfer in microchannels at high flow rates(Master’s dissertation). Retrieved from https://tez.yok.gov.tr/UlusalTezMerkezi/
  • [146] Wambsganss MW, France DM, Jendrzejczyk JA, Tran TN. Boiling heat transfer in a horizontal smalldiameter tube.
  • [147] Reid RS, Pate MB, Bergles AE. Evaporation of refrigerant 113 flowing inside smooth tubes. American Society of Mechanical Engineers, New York, NY; 1987 Jan 1.
  • [148] Tran TN, Wambsganss MW, France DM. Small circular-and rectangular-channel boiling with two refrigerants. International Journal of Multiphase Flow. 1996 Jun 1;22(3):485-98.
  • [149] Kasza KE, Didascalou T, Wambsganss MW. Microscale flow visualization of nucleate boiling in small channels: mechanisms influencing heat transfer. Argonne National Lab., IL (United States); 1997 Jul 1.
  • [150] Shiferaw D, Karayiannis TG, Kenning DB. Flow boiling in a 1.1 mm tube with R134a: Experimental results and comparison with model. International Journal of Thermal Sciences. 2009 Feb 1;48(2):331-41.
  • [151] Ravigururajan TS, Cuta J, McDonald CE, Drost MK. Effects of heat flux on two-phase flow characteristics of refrigerant flows in a micro-channel heat exchanger. American Society of Mechanical Engineers, New York, NY (United States); 1996 Dec 31.
  • [152] Kundu A, Kumar R, Gupta A. Flow boiling heat transfer characteristics of R407C inside a smooth tube with different tube inclinations. International journal of refrigeration. 2014 Sep 1;45:1-2.
  • [153] Kundu A, Kumar R, Gupta A. Evaporative heat transfer of R134a and R407C inside a smooth tube with different inclinations. International Journal of Heat and Mass Transfer. 2014 Sep 1;76:523-33.
  • [154] Gang W, Bi Q, Wang H, Yang Z, Zhu X, Hu Z. Forced convection heat transfer using high temperature and pressure water in an upward-inclined tube. Journal of heat transfer. 2012 Feb 1;134(2).
  • [155] Morcos SM, Mobarak A, Hilal M, Mohareb MR. Boiling heat transfer in horizontal and inclined rectangular channels.
  • [156] Wang S, Yang D, Xie B, Wang L, Wang Y. Experimental investigation on heat transfer characteristics of water in inclined downward tube of a supercritical pressure CFB boiler. Journal of Thermal Science. 2015 Oct;24(5):478-87.
  • [157] Jeong U, Kim SJ. Subcooling effect on boiling heat transfer of inclined downward-facing surface under low flow and pressure. International Journal of Heat and Mass Transfer. 2018 Dec 1;127:182-95.
There are 157 citations in total.

Details

Primary Language English
Subjects Engineering
Journal Section Articles
Authors

Hakan Karademir This is me 0000-0002-7297-7879

Güven Özçelik This is me 0000-0002-7091-6175

Özgen Açıkgöz This is me 0000-0002-0095-829X

Ahmet Selim Dalkılıç This is me 0000-0002-5743-3937

İbrahim Timuçin İnce This is me 0000-0003-0256-3619

Josua Meyer This is me 0000-0002-3675-5494

Somchai Wongwises This is me 0000-0003-2648-6814

Publication Date March 1, 2021
Submission Date September 26, 2020
Published in Issue Year 2021

Cite

APA Karademir, H., Özçelik, G., Açıkgöz, Ö., Dalkılıç, A. S., et al. (2021). COMPREHENSIVE REVIEW ON THE FLOW CHARACTERISTICS OF TWO-PHASE FLOWS IN INCLINED TUBES. Journal of Thermal Engineering, 7(3), 483-549. https://doi.org/10.18186/thermal.887821
AMA Karademir H, Özçelik G, Açıkgöz Ö, Dalkılıç AS, İnce İT, Meyer J, Wongwises S. COMPREHENSIVE REVIEW ON THE FLOW CHARACTERISTICS OF TWO-PHASE FLOWS IN INCLINED TUBES. Journal of Thermal Engineering. March 2021;7(3):483-549. doi:10.18186/thermal.887821
Chicago Karademir, Hakan, Güven Özçelik, Özgen Açıkgöz, Ahmet Selim Dalkılıç, İbrahim Timuçin İnce, Josua Meyer, and Somchai Wongwises. “COMPREHENSIVE REVIEW ON THE FLOW CHARACTERISTICS OF TWO-PHASE FLOWS IN INCLINED TUBES”. Journal of Thermal Engineering 7, no. 3 (March 2021): 483-549. https://doi.org/10.18186/thermal.887821.
EndNote Karademir H, Özçelik G, Açıkgöz Ö, Dalkılıç AS, İnce İT, Meyer J, Wongwises S (March 1, 2021) COMPREHENSIVE REVIEW ON THE FLOW CHARACTERISTICS OF TWO-PHASE FLOWS IN INCLINED TUBES. Journal of Thermal Engineering 7 3 483–549.
IEEE H. Karademir, G. Özçelik, Ö. Açıkgöz, A. S. Dalkılıç, İ. T. İnce, J. Meyer, and S. Wongwises, “COMPREHENSIVE REVIEW ON THE FLOW CHARACTERISTICS OF TWO-PHASE FLOWS IN INCLINED TUBES”, Journal of Thermal Engineering, vol. 7, no. 3, pp. 483–549, 2021, doi: 10.18186/thermal.887821.
ISNAD Karademir, Hakan et al. “COMPREHENSIVE REVIEW ON THE FLOW CHARACTERISTICS OF TWO-PHASE FLOWS IN INCLINED TUBES”. Journal of Thermal Engineering 7/3 (March 2021), 483-549. https://doi.org/10.18186/thermal.887821.
JAMA Karademir H, Özçelik G, Açıkgöz Ö, Dalkılıç AS, İnce İT, Meyer J, Wongwises S. COMPREHENSIVE REVIEW ON THE FLOW CHARACTERISTICS OF TWO-PHASE FLOWS IN INCLINED TUBES. Journal of Thermal Engineering. 2021;7:483–549.
MLA Karademir, Hakan et al. “COMPREHENSIVE REVIEW ON THE FLOW CHARACTERISTICS OF TWO-PHASE FLOWS IN INCLINED TUBES”. Journal of Thermal Engineering, vol. 7, no. 3, 2021, pp. 483-49, doi:10.18186/thermal.887821.
Vancouver Karademir H, Özçelik G, Açıkgöz Ö, Dalkılıç AS, İnce İT, Meyer J, Wongwises S. COMPREHENSIVE REVIEW ON THE FLOW CHARACTERISTICS OF TWO-PHASE FLOWS IN INCLINED TUBES. Journal of Thermal Engineering. 2021;7(3):483-549.

IMPORTANT NOTE: JOURNAL SUBMISSION LINK http://eds.yildiz.edu.tr/journal-of-thermal-engineering