Building envelope performance with different insulating materials – An exergy approach

Yıl 2015, Cilt: 1 Sayı: 4, 433 - 439, 01.04.2015

Yatheshth Anand Sanjeev Anand Ankush Gupta Sudhir Tyagi

https://doi.org/10.18186/jte.06871

Cited By: 11

Öz

Buildings are now considered as investments, everyone is interestd in. But they end up consuming lot of energy, hence its performance is necessary to be checked. Building performance can best analysed by keeping a close watch on the bulding operations and the exergy analysis is a better and comprehensive way to understand it in totality. Buildings have now a days become the largest producer of green house gases, thus making them a potential option for analysis. This is why national and international organizations have joined hands to raise governances to carryout symbolic proposals in building’s sustainability, energy efficiency and environmental protection. The energy consumption due to thermal loads can be minimized by effective and judicious use of building resources which includes building design and its operations. The present communication deals with the detailed analysis of a building envelope for four different cases i.e. no insulation on walls and roof and oven dry wood, polyurethane foam and fiberglass as insulation for the roof and walls respectively. The behavior of the building envelope for all the cases, with the variation of the

Anahtar Kelimeler

Exergy Demand Rate, Exergy, Thermal Comfort, Building Envelope

Building envelope performance with different insulating materials – An exergy approach

Öz

Anahtar Kelimeler

-

Kaynakça

• Mandil, C., 2004. Oil Crisis and Climate Challenges: 30 years of energy use in IEA Countries. In: International Energy Agency, Paris. Available via DIALOG. http://s3.amazonaws.com/zanran_storage/www.iea.org/Co ntentPages/9507952.pdf
• Schmidt, D. and Juusela, M.A., 2004. Low exergy systems for heating and cooling of buildings. In: Proceedings of the 21st Conference on Passive and Low Energy Architecture, Eindhoven, The Netherlands, pp. 1-6.
• Schmidt, D., 2004. Design of low exergy buildings - method and a pre-design tool. International Journal of Low Energy and Sustainable Buildings, 3, pp. 1-47.
• Koroneos, C., Nanaki, E. and Xydis, G., 2010. Solar air conditioning systems and their applicability - An exergy approach. Resources, Conservation and Recycling, 55(1), pp. 74-82.
• Rosen, M.A., 2001. Energy and exergy based comparison of coal fired and nuclear steam power plants. Exergy international Journal, 1(3), pp. 180-192.
• VTT Research notes, 2004. Heating and cooling with focus on increased efficiency and improved comfort. In: Ala- Juusela M, (ed), Guidebook to IEA ECBCS Annex 37, low exergy systems for heating and cooling of buildings guidebook summery report, VTT research notes 2256, VTT Finland. http://www2.vtt.fi/inf/pdf/tiedotteet/2004/T2256.pdf.
• Lee, S. and Sherif, S., 2001. Thermodynamic analysis of a lithium bromide/water absorption system for the cooling and heating applications. International Journal of Energy Resources, 25, pp. 1019 – 1031.
• Koroneo, C., Nanaki, E. and Xydis, G., 2010. Solar air conditioning systems and their applicability – An exergy approach. Resource conservation and Recycling, 55 pp. 74 – 82.
• Balta, M.T., Kalinci, Y. and Hepbasli, A., 2008. Evaluating a low exergy heating system fom the power plant through the heat pump to the building envelope. Exergy and Buildings, 40(10), pp. 1799 – 1804.
• Shukuya, M., 1994. Energy, entropy, exergy and space heating systems. In: Proceedings of the 3rd International Conference on Healthy Buildings, 1, pp. 369 – 374.
• Shukuya, M. and Hammache, A., 2002. Introduction to the concept of exergy – for a better understanding of low temperature heating and high temperature cooling systems. In: VTT Research Notes 2158, Espoo, Finland, Available via http://virtual.vtt.fi/virtual/proj6/annex37/presentation_of_a nnex_37/introduction_to_exergy.pdf. DIALOG.
• Shukuya, M., 2009. Exergy concept and its applications to the built environment, Building and Exvironment, 44(7), pp. 1545 – 1550.
• Villi, G., Pasut, W., Carli, M.D., 2009. CFD modelling and thermal performance analysis of a wooden ventilated roof structure. Building Simulation, 2, pp 215–228.
• Van, Schijndel, A.W.M., 2011. Multiphysics modeling of building physical constructions. Building Simulation, 4, pp 49–60.
• Vats, K. and Tiwari, G.N., 2012. Energy and exergy analysis of a building integrated semitransparent photovoltaic thermal (BISPVT) system. Applied Energy, 96, pp. 409– 416.
• Zhou, Y. and Gong, G., 2013. Exergy analysis of the building heating and cooling system from the power plant to the building envelop with hourly variable reference state. Energy and Buildings, 56, pp. 94–99.
• Fiore, V., Scalici, T., Di, Bella, G. and Valenza, A., 2015. A review on basalt fibre and its composites. Composites Part B, 74, pp. 74-94.
• Eymard, M., Plassiard, J.P., Perrotin, P. and Fay, S.L., 2015. Interfacial strength study between a concrete substrate and an innovative sprayed coating. Construction and Building Materials, 79, pp. 345–356.
• Balta, M.T., Dincer, I. and Hepbasli, A., 2010. Performance and sustainability assessment of energy options for building HVAC applications. Energy and Buildings, 42(8), pp. 1320- 1328.
• Forests Product Laboratory, 2010. Wood Handbook - Wood as an engineering material, U.S. Department of Agriculture, Forest http://www.fpl.fs.fed.us/utilities/information.php?info_id= 2. and Development,