STUDY OF THE EFFECT OF THE POROUS PLATES ON THE TANK BOTTOM ON THE BOILING PROCESS

Yıl 2019, Cilt: 5 Sayı: 3, 149 - 156, 14.03.2019

Morteza Bayareh

https://doi.org/10.18186/thermal.540120

Cited By: 4

Öz

In the
present study, the boiling process is simulated in a fixed-temperature tank
using the ANSYS FLUENT commercial software. Eulerian method is used to simulate
the condensation and evaporation processes. The effect of porous media on the
boiling process is investigated. For this purpose, a porous medium with
different porosity coefficients is placed on the bottom of the tank and its
effect on the bubble dynamics and wall thermal flux is investigated. The
simulation is carried out in two dimensions and is considered as unstable. The
results show that the porosity coefficient of the porous medium affects the
bubble dynamics.  The process of phase
change decreases by decreasing porosity. Also, the growth rate of the bubble
phase in the tank increases with increasing the heat transfer coefficient of
the porous medium.

Anahtar Kelimeler

CFD, Porosity Coefficient, Boiling, Two-Phase Flow

Kaynakça

• [1] M. K. Alkam, M. A. Al-Nimr, and M. O. Hamdan, (2001). Enhancing heat transfer in parallel plate channels by using porous inserts. International Journal of Heat and Mass Transfer, 44, 931–938.
• [2] A. V. Kuznetsov, (1998). Analytical Study of Fluid Flow and Heat Transfer during Forced Convection in a Composite Channel Partly Filled with a Brinkman–Forchheimer Porous Medium. Flow, Turbulence and Combustion, 60, 173–192.
• [3] A. V. Kuznetsov, (1999). Forced convection heat transfer in a parallel-plate channel with a porous core. International Journal of Applied Mechanical Engineering, 4, 271–290.
• [4] P. X. Jiang, and Z. P. Ren, (2001). Numerical investigation of forced convection heat transfer in porous media using a thermal non-equilibrium model. International journal of Heat and Fluid Flow, 22, 102-110.
• [5] D. Angirasa, (2002). Experimental investigation of forced convection heat transfer augmentation with metallic fibrous materials‖. International Journal of Heat and Mass Transfer, 45, 919–922.
• [6] D. Y. Lee, J. S. Jin, J.S. and B. H. Kang, (2002). Momentum boundary layer and its influence on the convective heat transfer in porous media. International Journal of Heat and Mass Transfer, 45, 229-233.
• [7] A. A. Mohamad, (2003). Heat transfer enhancements in heat exchangers fitted with porous media. Part I: constant wall temperature. International Journal of Thermal Science, 42, 385–395.
• [8] A. V. Kuznetsov, (2004). Numerical modeling of turbulent flow in a composite porous/fluid duct utilizing a two-layer k–e model to account for interface roughness. International Journal of Thermal Science, 43, 1047–1056.
• [9] K. Vafai, and A. Haji-Sheikh, (2004). Analysis of flow and heat transfer in porous media imbedded inside various-shaped ducts. International Journal of Heat and Mass Transfer, 47, 1889–1905.
• [10] P. Forooghi, M. Abkar, and M. Saffar-Avval, (2011). Steady and unsteady heat transfer in a channel partially filled with porous media under thermal non-equilibrium condition. Transport in Porous Media, 86, 177–198.
• [1] V. V. Satyamurty, and D. Bhargavi, (2010). Forced convection in thermally developing region of a channel partially filled with a porous material and optimal porous fraction. International Journal of Thermal Sciences, 49, 319–332.
• [12] R. Rudemiller, J. D. Lindsay, (1989). Apparatus for investigating boiling phenomena in a fibrous porous medium. International Journal of Heat and Mass Transfer, 16, 785-794.
• [13] J. S. Lioumbas, T. D. Karapantsios. (2015). Bubble dynamics and substrate thermalization during boiling in watersaturated porous matrix. Experimental Thermal and Fluid Science, 67, 75-80.
• [14] K. Vafai, (2005). Handbook of Porous Media, 2nd edition, Taylor & Francis Group, Boca Raton.
• [15] Y. Ose, T. Kunugi, (2011). Numerical Study on Subcooled Pool Boiling. Nuclear Science and Technology, 2, 125-129.
• [16] Heat and Mass Transfer with the Mixture Model and Evaporation-Condensation Model, Tutorial Guide, Ansys 16.