FORCED CONVECTION COOLIG OF MULTIPLE HEAT SOURCES USING OPEN CELL METAL FOAMS

Yıl 2021, Cilt: 7 Sayı: 1, 255 - 270, 01.01.2021

Ali Bousri Abdelmalek Hamadouche Samir Khali Rachid Nebbali M. Hassen Beji

https://doi.org/10.18186/thermal.849858

Öz

A numerical simulation is performed for heat transfer enhancement in a parallel-plate heat exchanger equipped with multiple metal foam blocks of various size. Localized heat sources are placed on the top wall of the exchanger in the location of the metallic foam blocks. The Brinkman-Forchheimer-extended Darcy model is used to characterize the flow field inside the foam region. Solution of the coupled governing equations for the composite fluid/ foam system is obtained using the finite volume method. In this study, the influence of the parameters such as the Darcy number, the Reynolds number and the arrangement of the foam samples on the hydrodynamic and thermal behavior of the flow are deeply analyzed. The results are reported for two different configurations containing four metal foam blocks mounted alternately on the top and bottom of the channel walls: (1) blocks are attached straightly to the channel walls and (2) blocks positioned at a precise distance from the channel walls . The obtained results show that the improvement of the cooling of the heat sources by forced convection is better in configuration (2).

Anahtar Kelimeler

Numerical modeling, Heated metallic foam blocks, Laminar forced convection in the channel

Kaynakça

• [1] Jeng TM, Tzeng SC, Xu R. Experimental study of heat transfer characteristics in a 180-deg round turned channel with discrete aluminum-foam blocks. International Journal of Heat and Mass Transfer. 2014 Apr 1;71:133-41. doi:10.1016/j.ijheatmasstransfer.2013.11.035.
• [2] Mancin S, Zilio C, Rossetto L, Cavallini A. Foam height effects on heat transfer performance of 20 ppi aluminum foams. Applied thermal engineering. 2012 Dec 31;49:55-60. doi:10.1016/j.applthermaleng.2011.05.015.
• [3] Rong F, Zhang W, Shi B, Guo Z. Numerical study of heat transfer enhancement in a pipe filled with porous media by axisymmetric TLB model based on GPU. International Journal of Heat and Mass Transfer. 2014 Mar 1;70:1040-9. doi:10.1016/j.ijheatmasstransfer.2013.11.028.
• [4] Qu ZG, Xu HJ, Tao WQ. Fully developed forced convective heat transfer in an annulus partially filled with metallic foams: an analytical solution. International Journal of Heat and Mass Transfer. 2012 Dec 1;55(25-26):7508-19. doi:10.1016/j.ijheatmasstransfer.2012.07.048.
• [5] Chumpia A, Hooman K. Performance evaluation of tubular aluminum foam heat exchangers in single row arrays. Applied Thermal Engineering. 2015 May 25;83:121-30. doi:10.1016/j.applthermaleng.2015.03.015.
• [6] Kamath PM, Balaji C, Venkateshan SP. Convection heat transfer from aluminium and copper foams in a vertical channel–An experimental study. International Journal of Thermal Sciences. 2013 Feb 1;64:1-0. doi:10.1016/j.ijthermalsci.2012.08.015.
• [7] Abadi GB, Moon C, Kim KC. Experimental study on single-phase heat transfer and pressure drop of refrigerants in a plate heat exchanger with metal-foam-filled channels. Applied Thermal Engineering. 2016 Jun 5;102:423-31. doi:10.1016/j.applthermaleng.2016.03.099.
• [8] Sung HJ, Kim SY, Hyun JM. Forced convection from an isolated heat source in a channel with porous medium. International journal of heat and fluid flow. 1995 Dec 1;16(6):527-35. doi:10.1016/0142-727X(95)00032-L.
• [9] Wang P, Liu DY, Xu C. Numerical study of heat transfer enhancement in the receiver tube of direct steam generation with parabolic trough by inserting metal foams. Applied energy. 2013 Feb 1;102:449-60. doi:10.1016/j.apenergy.2012.07.026.
• [10] Chen CC, Huang PC, Hwang HY. Enhanced forced convective cooling of heat sources by metal-foam porous layers. International Journal of Heat and Mass Transfer. 2013 Mar 1;58(1-2):356-73. doi:10.1016/j.ijheatmasstransfer.2012.11.041.
• [11] Yang YT, Hwang ML. Numerical simulation of turbulent fluid flow and heat transfer characteristics in heat exchangers fitted with porous media. International Journal of Heat and Mass Transfer. 2009 Jun 1;52(13-14):2956-65. doi:10.1016/j.ijheatmasstransfer.2009.02.024.
• [12] Jamal-Abad MT, Saedodin S, Aminy M. Experimental investigation on a solar parabolic trough collector for absorber tube filled with porous media. Renewable Energy. 2017 Jul 1;107:156-63. doi:10.1016/j.renene.2017.02.004.
• [13] Arbak A, Bağcı Ö, Dukhan N. FLOW REGIMES IN COMMERCIAL METAL FOAM HAVING 10 PORES PER INCH. JOURNAL OF THERMAL ENGINEERING. 2016 Dec 1;2(6):1023-8.
• [14] Jeng TM, Tzeng SC, Tang FZ. Fluid flow and heat transfer characteristics of the porous metallic heat sink with a conductive cylinder partially filled in a rectangular channel. International journal of heat and mass transfer. 2010 Sep 1;53(19-20):4216-27. doi:10.1016/j.ijheatmasstransfer.2010.05.044.
• [15] Hamadouche A, Nebbali R, Benahmed H, Kouidri A, Bousri A. Experimental investigation of convective heat transfer in an open-cell aluminum foams. Experimental Thermal and Fluid Science. 2016 Feb 1;71:86-94. doi:10.1016/j.expthermflusci.2015.10.009.
• [16] Dukhan N, Özdemir M, Kavurmacıoğlu L. Experimental fully-developed thermal convection for non-darcy water flow in metal foam. J. Therm. Eng.. 2016 Apr 1;2(2):677-82. doi:10.18186/JTE.46830.
• [17] Patankar SV. Numerical heat transfer and fluid flow, Hemisphere Publ. Corp., New York. 1980;58. doi:10.1002/cite.330530323.