Research Article

Study on topology optimization of scraper conveyor chain

Volume: 7 Number: 1 June 30, 2024
Hamit Türkmen *, Melih Gazi Kırpık , Tuğrul Sapmaz , Fethiye Yalçın
PDF Download
The International Journal of Materials and Engineering Technology Cover The International Journal of Materials and Engineering Technology
EN

Study on topology optimization of scraper conveyor chain

Abstract

Silos are structures where grains are stored. In general, for transportation and prevention of wheat from spoiling, some sub-systems can be used in silos. One of these sub-systems is scraper conveyor that is used to transport the grains in horizontal direction. Similar to all other systems in engineering, in order to increase the system efficiency and to optimize the required power for the motors, weight reduction is important without sacrificing safety factor of the system significantly. Topology optimization has been used by mechanical and civil engineers for many years. In this study it is aimed to apply topology optimization to the chain of a scraper conveyor that is used to transport 80 tons of grains per hour in a silo by using ANSYS® Mechanical. In conclusion, a lightweight and material saved new design for the chain was designed without sacrificing from safety factor significantly.

Keywords

Topology optimization , Ansys Mechanical , Scraper Conveyor , Silo , Bulk Material Conveying.

References

  1. Topology Optimization in Ansys Mechanical, ANSYS Innovation Courses. Accessed: Jul. 06, 2023, [online] Available: https://courses.ansys.com/index.php/courses/topology-optimization-using-ansys-mechanical/
  2. Fayed, M.E., and Skocir, T.S., Mechanical conveyors: selection and operation. Lancaster, PA: Technomic Pub. Co, 1997
  3. Katterfeld,A., Whitepaper: Calculation of Motion Resistances in Trough Chain Conveyors, 2021
  4. Öztürk, T., and Ki̇Bar, H., Theoretical Approaches in The Determination of Wall Pressures in Storage Structures, jist, 2016, 4(6): 51
  5. Molenda, M., Horabik, J., Ross, I.J., and Montross, M.D., Friction of wheat: grainongrain and on corrugated steel, Transactions of the ASAE, 2002, 45(2)
  6. Bendsøe, M.P., and Kikuchi, N., Generating optimal topologies in structural design using a homogenization method, Computer Methods in Applied Mechanics and Engineering, 1988, 71(2):197–224
  7. Memari, A., Dargi, A., Akbari Jokar, M. R., Ahmad, R., and Abdul Rahim, A.R., Sustainable supplier selection: A multi-criterion intuitionistic fuzzy TOPSIS method, Journal of Manufacturing Systems, 2019, 50, 9–24
  8. Jiang, S.B., Zeng, Q.L., Wang, G., Gao, K.D., Wang, Q.Y., and Hidenori, K., Contact Analysis of Chain Drive in Scraper Conveyor Based on Dynamic Meshing Properties, Int. j. simul. model., 2018, 17(1): 81–91
  9. Eras, J.J.C., Fandiño, J.M.M., Gutierrez, A.S., Ulload, M.J.C., and Gonzalez, L.M.C., Causal analysis and solution of the failure of sprocket drivers in a clinker scraper conveyor, Journal of Southwest Jiaotong University, 2022, 57(4):326–337
  10. Yu, F., Miaotian, Z., Guoping, L., and Guoying, M., Finite Element Analysis and Structure Optimization of the Middle Groove of Scraper Conveyor, IOP Conf. Ser.: Mater. Sci. Eng., 2019, 616(1):012022

Details

Primary Language

English

Subjects

Optimization Techniques in Mechanical Engineering , Machine Design and Machine Equipment

Journal Section

Research Article

Authors

Early Pub Date

June 30, 2024

Publication Date

June 30, 2024

Submission Date

December 26, 2023

Acceptance Date

June 4, 2024

Published in Issue

Year 2024 Volume: 7 Number: 1

IZ

https://izlik.org/JA75HS86KZ

Cite

RIS / Bibtex
APA
Türkmen, H., Kırpık, M. G., Sapmaz, T., & Yalçın, F. (2024). Study on topology optimization of scraper conveyor chain. The International Journal of Materials and Engineering Technology, 7(1), 48-53. https://izlik.org/JA75HS86KZ

Creative Commons Lisansı

Bu eser Creative Commons Atıf-GayriTicari 4.0 Uluslararası Lisansı ile lisanslanmıştır.