Research Article

Characterization and Power Analysis of Solar Cells with Different Geometries

Volume: 8 Number: 1 June 30, 2025
EN

Characterization and Power Analysis of Solar Cells with Different Geometries

Abstract

With rapid increase in population, the living standards of human beings are also increasing at the same rate. When these two factors are considered together, it is a natural consequence that the increase in global energy demand is inevitable. It is known that 80% of this demand, which is constantly increasing every single day, is met by fossil fuels. With the occurrence of the negative effects of fossil fuels, mankind has turned to renewable energy sources that are reliable, uninterrupted, clean and most importantly unlimited. At this point, especially with the breakthroughs made in the last 25 years, solar energy stands out with the potential energy that rate it contains. However, today, the efficiency of commercially produced solar systems in field conditions remains only around 17%. Therefore, one of the important issues for researchers is to increase the efficiency of these systems and to prevent efficiency losses due to design conditions. The aim of this study is that analyze the power distributions in different cell geometries with the finite element method using GriddlerSolar2.5 in order to support different studies in the literature and to breed new ideas for future studies. In this study, nine different cell geometries and their fundamental power behaviors (e.g. power output, resistance losses, recombination losses, shading losses) are comparatively discussed.

Keywords

Solar Cells, Photovoltaics, Energy, Efficiency, Cell Geometry

References

  1. Kruse-Andersen, P.K., Directed technical change, environmental sustainability, and population growth, Journal of Environmental Economics and Management, 2023, 122, 102885
  2. Yan, C., Zhenga, M., Guofeng, S., Cheng, Y., Shexia, M., Sun, J., Cui, M., Zhang, M., Han, Y. and Chen, Y., Characterization of carbon fractions in carbonaceous aerosols from typical fossil fuel combustion sources, Fuel, 2019, 254(5): 115620
  3. Delibaş, H.M., Yenilikçi Bir Tasarım ile Birlikte Fotovoltaik Panel Verimliliğinin Arttırılması, MSc. Thesis, Karabük Üniversitesi Lisansüstü Eğitim Enstitüsü, 2021
  4. Renewables 2024 Global Status Report Global Overview, 2024
  5. Byrne, J., Shen, B., and Wallace, W., The economics of sustainable energy for rural development: A study of renewable energy in rural China, Energy Policy, 1998, 26(1): 45–54
  6. Bigorajski, J., and Chwieduk, D., Analysis of a micro photovoltaic/thermal – PV/T system operation in moderate climate, Renew. Energy, 2019, 137: 127–136
  7. Šúri, M., Huld, T. A., Dunlop, E. D., and Ossenbrink, H. A., Potential of solar electricity generation in the European Union member states and candidate countries, Sol. Energy, 2007, 81(10): 1295–1305
  8. Safarpour, A., Laleh, S.S., and Soltani, S., Identifying challenges, benefits, and recommendations for utilizing solar panels in sport stadiums: A thematic analysis, Progress in Engineering Science, 2025, 2, 100035
  9. Palanisamy, S., Ekambaram, M., Musali, B. J., Eswar, A.G.V.V., and Sai, M.C.S., Solar hybrid drying characteristics of byadagi chilli in South India, In AIP Conference Proceedings, 2024, 3192(1) 10. Akman, Ö., Fotovoltaik panellerde sıcaklığın elektriksel verime etkileri ve termal güç eldesi, Yüksek Lisans Tezi, Karabük Üniversitesi Fen Bilimleri Enstitüsü, 2019
  10. Farret, F.A., and Simões, M.G., Integration of renewable sources of energy, Wiley–Blackwell, 2017, 688
APA
Delibaş, H. M., & Yılmaz, N. F. (2025). Characterization and Power Analysis of Solar Cells with Different Geometries. The International Journal of Materials and Engineering Technology, 8(1), 22-31. https://doi.org/10.70858/tijmet.1648609
AMA
1.Delibaş HM, Yılmaz NF. Characterization and Power Analysis of Solar Cells with Different Geometries. TIJMET. 2025;8(1):22-31. doi:10.70858/tijmet.1648609
Chicago
Delibaş, Hasan Mithat, and Necip Fazıl Yılmaz. 2025. “Characterization and Power Analysis of Solar Cells With Different Geometries”. The International Journal of Materials and Engineering Technology 8 (1): 22-31. https://doi.org/10.70858/tijmet.1648609.
EndNote
Delibaş HM, Yılmaz NF (June 1, 2025) Characterization and Power Analysis of Solar Cells with Different Geometries. The International Journal of Materials and Engineering Technology 8 1 22–31.
IEEE
[1]H. M. Delibaş and N. F. Yılmaz, “Characterization and Power Analysis of Solar Cells with Different Geometries”, TIJMET, vol. 8, no. 1, pp. 22–31, June 2025, doi: 10.70858/tijmet.1648609.
ISNAD
Delibaş, Hasan Mithat - Yılmaz, Necip Fazıl. “Characterization and Power Analysis of Solar Cells With Different Geometries”. The International Journal of Materials and Engineering Technology 8/1 (June 1, 2025): 22-31. https://doi.org/10.70858/tijmet.1648609.
JAMA
1.Delibaş HM, Yılmaz NF. Characterization and Power Analysis of Solar Cells with Different Geometries. TIJMET. 2025;8:22–31.
MLA
Delibaş, Hasan Mithat, and Necip Fazıl Yılmaz. “Characterization and Power Analysis of Solar Cells With Different Geometries”. The International Journal of Materials and Engineering Technology, vol. 8, no. 1, June 2025, pp. 22-31, doi:10.70858/tijmet.1648609.
Vancouver
1.Hasan Mithat Delibaş, Necip Fazıl Yılmaz. Characterization and Power Analysis of Solar Cells with Different Geometries. TIJMET. 2025 Jun. 1;8(1):22-31. doi:10.70858/tijmet.1648609