Loading [a11y]/accessibility-menu.js
Research Article
BibTex RIS Cite

Investigation of the Properties of Warm Mix Asphalt Involving Organic Additive

Year 2018, Volume: 13 Issue: 1, 45 - 53, 01.03.2018

Abstract

Demand
for sustainable pavements increases day by day in asphalt paving industry. Warm
Mix Asphalt (WMA) technology has begun to be an interesting topic for
researchers owing to sustainability and environmental issues. Within the scope
of this study, the effect of an organic WMA additive was evaluated in terms of
mixture characteristics and performance. The fundamental and rheological
properties of bitumen samples involving organic WMA additive were determined by
conventional bitumen tests and dynamic shear rheometer (DSR). Mixtures modified
with organic WMA additives were produced according to Marshall mix design
method and the optimum bitumen content of the samples were determined.
Following the determination of optimum bitumen content, the effect of the organic
WMA additive was investigated in terms of indirect tensile stiffness modulus,
fatigue and creep behaviour. Hamburg wheel tracking device was also applied to
evaluate the permanent deformation characteristics of WMA mixtures in
comparison to Hot Mix Asphalt (HMA) mixtures. The results appraised the effect
of the organic WMA additive on rheological and performance characteristics of
bituminous mixtures.

References

  • 1. Newcomb, D. (2006). An introduction to warm-mix asphalt. National Asphalt Pavement Association. 2. Hurley, G. C., Prowell, B. D. (2006). Evaluation of potential process for use in warm mix asphalt. J Assoc Asphalt Paving Technol., vol. 75, pp. 41-90. 3. Kristjansdottr, O., Muench, S. T., Michael, L., Burke, G. (2007). Assessing potential for warmmix asphalt technology adoption. Transport Res Rec., vol. 2040, pp. 91-99. 4. Rubio, M. C., Martinez, G., Baena, L., Moreno, F. (2012). Warm mix asphalt: an overview. J Cleaner Prod., vol. 24, pp. 76-84. 5. D’Angelo, J., Harm, E., Bartoszek, J., Baumgardner, G., Corrigan, M., Cowsert, J., et al. (2008). Warm-mix asphalt European practice. American Trade Initiatives. 6. Croteau, J. M., Tessier, B. (2008). Warm mix asphalt paving technologies: a road builder’s perspective. The 2008 Annual Conference of the Transportation Association of Canada. 7. Button, J. W., Estakhri, C., Wimsatt, A. (2007). A synthesis of warm-mix Asphalt. Texas Transportation Institute, The Texas A&M University. 8. Hurley, G. C., Prowell, B. D. (2005). Evaluation of Sasobit for use in warm mix asphalt. National Center for Asphalt Technology. 9. Jamshidi, A., Hamzah, M. O., You, Z. (2013). Performance of Warm Mix Asphalt containing Sasobit®: State-of-the-art. Construction and Building Materials, vol. 38, pp. 530-553. 10. Zaumanis, M. (2010). Warm mix asphalt investigation. M.Sc. Thesis, Technical University of Denmark, Kgs.Lyngby. 11. D’Angelo, J., Harm, E., Bartoszek, J., Baumgardner, G., Corrigan, M., Cowsert, J., Harman, T., Jamshidi, M., Jones, W., Newcomb, D., Prowell, B., Sines, R., Yeaton, B. (2008). Warm-mix asphalt: European practice. American Trade Initiatives. 12. Austerman, A. J., Mogawer, W. S., Bonaquist, R. (2009). Evaluating the effects of warm mix asphalt technology additive dosages on the workability and durability of asphalt mixtures containing recycled asphalt pavement. Transportation Research Board 88th Annual Meeting. 13. Kanitpong, K., Nam, K., Martono, W., Bahia, H. (2008). Evaluation of a warm mix asphalt additive. Construction Materials. vol. 161(1), pp. 1-8. 14. O’Sullivan, K., Wall, P. (2009). The effect of warm mix asphalt additives on recycled asphalt pavement. Worcester Polytechnic Institute. 15. American Society for Testing and Materials (2006). ASTM D5-06: Standard test method for penetration of bituminous materials. West Conshohocken, PA. 16. American Society for Testing and Materials (2000). ASTM D36-95: Test method for softening point of bitumen (ring and ball apparatus). West Conshohocken, PA. 17. American Society for Testing and Materials (2002). ASTM D 1754-97: Standard test method for effects of heat and air on asphaltic materials (thin-film oven test).; West Conshohocken, PA. 18. Read, J., Whiteoak, D. (2003). The Shell bitumen handbook. Thomas Telford Publishing, London. 19. Specht, L. P., Khatchatourian, O., Brito, L. A. T., Ceratti, J. A. P. (2007). Modelling of asphalt-rubber rotational viscosity by statistical analysis and neural networks. Materials Research. vol. 10(1), pp. 69-74. 20. American Society for Testing and Materials (2002). ASTM D4402-06: Standard test method for viscosity determination of asphalt at elevated temperatures using a rotational viscometer. West Conshohocken, PA. 21. American Society for Testing and Materials (2011). ASTM D3549-11: Standard test method for thickness or height of compacted bituminous paving mixture specimens. West Conshohocken, PA. 22. American Society for Testing and Materials (2012). ASTM D6931-12: Standard test method for indirect tensile (IDT) strength of bituminous mixtures. West Conshohocken, PA. 23. British Standards Institution (1993). BS DD 213: Method for determination of the indirect tensile stiffness modulus of bituminous mixtures. Draft for development, London. 24. British Standards Institution (1997). BS DD ABF: Method for determination of the fatigue characteristics of bituminous mixtures using indirect tensile fatigue. Draft for development, London. 25. Nejad, F. M., Aflaki, E., Mohammadi, M. A. (2010). Fatigue behavior of SMA and HMA mixtures. Constr Build Mater., vol. 24, pp. 1158-1165. 26. Nejad F. M., Azarhoosh, A., Hamedi, G.H., Roshani, H. (2014). Rutting performance prediction of warm mix asphalt containing reclaimed asphalt pavements. Road Materials and Pavement Design, vol. 15(1), pp. 207-219. 27. European Committee for Standardization (2003). EN 12697-22. Bituminous mixtures - Test methods for hot mix asphalt - Part 22: Wheel tracking. 28. Sengoz, B., Isikyakar, G. (2008). Analysis of styrene-butadiene-styrene polymer modified bitumen using fluorescent microscopy and conventional test methods. Journal of Hazardous Materials, vol. 150, pp. 424-432.
Year 2018, Volume: 13 Issue: 1, 45 - 53, 01.03.2018

Abstract

References

  • 1. Newcomb, D. (2006). An introduction to warm-mix asphalt. National Asphalt Pavement Association. 2. Hurley, G. C., Prowell, B. D. (2006). Evaluation of potential process for use in warm mix asphalt. J Assoc Asphalt Paving Technol., vol. 75, pp. 41-90. 3. Kristjansdottr, O., Muench, S. T., Michael, L., Burke, G. (2007). Assessing potential for warmmix asphalt technology adoption. Transport Res Rec., vol. 2040, pp. 91-99. 4. Rubio, M. C., Martinez, G., Baena, L., Moreno, F. (2012). Warm mix asphalt: an overview. J Cleaner Prod., vol. 24, pp. 76-84. 5. D’Angelo, J., Harm, E., Bartoszek, J., Baumgardner, G., Corrigan, M., Cowsert, J., et al. (2008). Warm-mix asphalt European practice. American Trade Initiatives. 6. Croteau, J. M., Tessier, B. (2008). Warm mix asphalt paving technologies: a road builder’s perspective. The 2008 Annual Conference of the Transportation Association of Canada. 7. Button, J. W., Estakhri, C., Wimsatt, A. (2007). A synthesis of warm-mix Asphalt. Texas Transportation Institute, The Texas A&M University. 8. Hurley, G. C., Prowell, B. D. (2005). Evaluation of Sasobit for use in warm mix asphalt. National Center for Asphalt Technology. 9. Jamshidi, A., Hamzah, M. O., You, Z. (2013). Performance of Warm Mix Asphalt containing Sasobit®: State-of-the-art. Construction and Building Materials, vol. 38, pp. 530-553. 10. Zaumanis, M. (2010). Warm mix asphalt investigation. M.Sc. Thesis, Technical University of Denmark, Kgs.Lyngby. 11. D’Angelo, J., Harm, E., Bartoszek, J., Baumgardner, G., Corrigan, M., Cowsert, J., Harman, T., Jamshidi, M., Jones, W., Newcomb, D., Prowell, B., Sines, R., Yeaton, B. (2008). Warm-mix asphalt: European practice. American Trade Initiatives. 12. Austerman, A. J., Mogawer, W. S., Bonaquist, R. (2009). Evaluating the effects of warm mix asphalt technology additive dosages on the workability and durability of asphalt mixtures containing recycled asphalt pavement. Transportation Research Board 88th Annual Meeting. 13. Kanitpong, K., Nam, K., Martono, W., Bahia, H. (2008). Evaluation of a warm mix asphalt additive. Construction Materials. vol. 161(1), pp. 1-8. 14. O’Sullivan, K., Wall, P. (2009). The effect of warm mix asphalt additives on recycled asphalt pavement. Worcester Polytechnic Institute. 15. American Society for Testing and Materials (2006). ASTM D5-06: Standard test method for penetration of bituminous materials. West Conshohocken, PA. 16. American Society for Testing and Materials (2000). ASTM D36-95: Test method for softening point of bitumen (ring and ball apparatus). West Conshohocken, PA. 17. American Society for Testing and Materials (2002). ASTM D 1754-97: Standard test method for effects of heat and air on asphaltic materials (thin-film oven test).; West Conshohocken, PA. 18. Read, J., Whiteoak, D. (2003). The Shell bitumen handbook. Thomas Telford Publishing, London. 19. Specht, L. P., Khatchatourian, O., Brito, L. A. T., Ceratti, J. A. P. (2007). Modelling of asphalt-rubber rotational viscosity by statistical analysis and neural networks. Materials Research. vol. 10(1), pp. 69-74. 20. American Society for Testing and Materials (2002). ASTM D4402-06: Standard test method for viscosity determination of asphalt at elevated temperatures using a rotational viscometer. West Conshohocken, PA. 21. American Society for Testing and Materials (2011). ASTM D3549-11: Standard test method for thickness or height of compacted bituminous paving mixture specimens. West Conshohocken, PA. 22. American Society for Testing and Materials (2012). ASTM D6931-12: Standard test method for indirect tensile (IDT) strength of bituminous mixtures. West Conshohocken, PA. 23. British Standards Institution (1993). BS DD 213: Method for determination of the indirect tensile stiffness modulus of bituminous mixtures. Draft for development, London. 24. British Standards Institution (1997). BS DD ABF: Method for determination of the fatigue characteristics of bituminous mixtures using indirect tensile fatigue. Draft for development, London. 25. Nejad, F. M., Aflaki, E., Mohammadi, M. A. (2010). Fatigue behavior of SMA and HMA mixtures. Constr Build Mater., vol. 24, pp. 1158-1165. 26. Nejad F. M., Azarhoosh, A., Hamedi, G.H., Roshani, H. (2014). Rutting performance prediction of warm mix asphalt containing reclaimed asphalt pavements. Road Materials and Pavement Design, vol. 15(1), pp. 207-219. 27. European Committee for Standardization (2003). EN 12697-22. Bituminous mixtures - Test methods for hot mix asphalt - Part 22: Wheel tracking. 28. Sengoz, B., Isikyakar, G. (2008). Analysis of styrene-butadiene-styrene polymer modified bitumen using fluorescent microscopy and conventional test methods. Journal of Hazardous Materials, vol. 150, pp. 424-432.
There are 1 citations in total.

Details

Primary Language English
Subjects Engineering
Journal Section TJST
Authors

Ali Topal This is me

Baha Vural Kök This is me

Derya Kaya

Burak Şengöz This is me

Peyman Dokandari This is me

Mehmet Yılmaz This is me

Publication Date March 1, 2018
Submission Date January 28, 2017
Published in Issue Year 2018 Volume: 13 Issue: 1

Cite

APA Topal, A., Kök, B. V., Kaya, D., Şengöz, B., et al. (2018). Investigation of the Properties of Warm Mix Asphalt Involving Organic Additive. Turkish Journal of Science and Technology, 13(1), 45-53.
AMA Topal A, Kök BV, Kaya D, Şengöz B, Dokandari P, Yılmaz M. Investigation of the Properties of Warm Mix Asphalt Involving Organic Additive. TJST. March 2018;13(1):45-53.
Chicago Topal, Ali, Baha Vural Kök, Derya Kaya, Burak Şengöz, Peyman Dokandari, and Mehmet Yılmaz. “Investigation of the Properties of Warm Mix Asphalt Involving Organic Additive”. Turkish Journal of Science and Technology 13, no. 1 (March 2018): 45-53.
EndNote Topal A, Kök BV, Kaya D, Şengöz B, Dokandari P, Yılmaz M (March 1, 2018) Investigation of the Properties of Warm Mix Asphalt Involving Organic Additive. Turkish Journal of Science and Technology 13 1 45–53.
IEEE A. Topal, B. V. Kök, D. Kaya, B. Şengöz, P. Dokandari, and M. Yılmaz, “Investigation of the Properties of Warm Mix Asphalt Involving Organic Additive”, TJST, vol. 13, no. 1, pp. 45–53, 2018.
ISNAD Topal, Ali et al. “Investigation of the Properties of Warm Mix Asphalt Involving Organic Additive”. Turkish Journal of Science and Technology 13/1 (March 2018), 45-53.
JAMA Topal A, Kök BV, Kaya D, Şengöz B, Dokandari P, Yılmaz M. Investigation of the Properties of Warm Mix Asphalt Involving Organic Additive. TJST. 2018;13:45–53.
MLA Topal, Ali et al. “Investigation of the Properties of Warm Mix Asphalt Involving Organic Additive”. Turkish Journal of Science and Technology, vol. 13, no. 1, 2018, pp. 45-53.
Vancouver Topal A, Kök BV, Kaya D, Şengöz B, Dokandari P, Yılmaz M. Investigation of the Properties of Warm Mix Asphalt Involving Organic Additive. TJST. 2018;13(1):45-53.