Harnessing earthquake generated glass and plastic waste for sustainable construction

Year 2024, , 394 - 402, 30.04.2024

Fazilah Khurshid , Ayşe Yeter Günal

https://doi.org/10.31127/tuje.1405272

Abstract

On February 6, 2023 Türkiye witnessed two massive earthquakes of magnitudes 7.6 and 7.8 centred near Gaziantep Province. The aftermaths of the earthquakes were devastating. Thousands of people were dead under the rubble of collapsed buildings and millions displaced. The challenge was the disposal of tons of debris generated due to the destruction of structures and roads, and the construction of new buildings for relocation of displaced people. Not only being uneconomical, the disposal and new construction also became a major environmental concern. A solution to this problem lies in the constructive disposal of earthquake wastes i.e., the utilization of waste materials from debris generated after an earthquake in order to ensure its proper and beneficial disposition. The article provides a two problems one solution technique in this regard. Research techniques and outcomes of modification of glass and plastic waste in the industries for the manufacture of good quality construction materials and the subsequent use of these materials in construction are reviewed. Further analysis is carried out to determine whether the application of this knowledge in practical field ensures that both environmental and economical requirements are met.

Keywords

Earthquake debris, Glass, Plastics, Recycling materials

References

• Ministry of interior disaster and emergency management presidency. (2023). https://en.afad.gov.tr/
• Xiao, J., Deng, Q., Hou, M., Shen, J., & Gencel, O. (2023). Where are demolition wastes going: reflection and analysis of the February 6, 2023 earthquake disaster in Turkey. Low-carbon Materials and Green Construction, 1(1), 17. https://doi.org/10.1007/s44242-023-00017-3
• U.S. Geological Survey, (2017). PAGER - Prompt Assessment of Global Earthquakes for Response: U.S. Geological Survey. https://doi.org/10.5066/F7125QTZ
• Tavşan, S. (2023). Turkey set to recycle quake debris covering 'two Manhattans'. https://asia.nikkei.com/Economy/Natural-disasters/Turkey-set-to-recycle-quake-debris-covering-two-Manhattans
• Demir, I. (2009). Reuse of waste glass in building brick production. Waste Management & Research, 27(6), 572-577. https://doi.org/10.1177/0734242X08096528
• Terán Mejía, C. I., Alvarado Susaníbar, C. E., CastañedaOlivera, C. A., Jave Nakayo, J. L., Benites-Alfaro, E. G., & Cabrera Carranza, C. F. (2023). Bricks Made from Glass Residues: a Sustainable Alternative for Construction and Architecture. CET Journal-Chemical Engineering Transactions, 100, 91-96.
• Penacho, P., de Brito, J., & Veiga, M. R. (2014). Physico-mechanical and performance characterization of mortars incorporating fine glass waste aggregate. Cement and Concrete Composites, 50, 47-59. https://doi.org/10.1016/j.cemconcomp.2014.02.007
• Corinaldesi, V., Gnappi, G., Moriconi, G., & Montenero, A. J. W. M. (2005). Reuse of ground waste glass as aggregate for mortars. Waste Management, 25(2), 197-201. https://doi.org/10.1016/j.wasman.2004.12.009
• Lee, G., Poon, C. S., Wong, Y. L., & Ling, T. C. (2013). Effects of recycled fine glass aggregates on the properties of dry–mixed concrete blocks. Construction and Building Materials, 38, 638-643. https://doi.org/10.1016/j.conbuildmat.2012.09.017
• Batayneh, M., Marie, I., & Asi, I. (2007). Use of selected waste materials in concrete mixes. Waste Management, 27(12), 1870-1876. https://doi.org/10.1016/j.wasman.2006.07.026
• Aneke, F. I., & Shabangu, C. (2021). Green-efficient masonry bricks produced from scrap plastic waste and foundry sand. Case Studies in Construction Materials, 14, e00515. https://doi.org/10.1016/j.cscm.2021.e00515
• Aneke, F. I., & Shabangu, C. (2021). Green-efficient masonry bricks produced from scrap plastic waste and foundry sand. Case Studies in Construction Materials, 14, e00515. https://doi.org/10.1016/j.cscm.2021.e00515
• Akinwumi, I. I., Domo-Spiff, A. H., & Salami, A. (2019). Marine plastic pollution and affordable housing challenge: Shredded waste plastic stabilized soil for producing compressed earth bricks. Case Studies in Construction Materials, 11, e00241. https://doi.org/10.1016/j.cscm.2019.e00241
• Paihte, P. L., Lalngaihawma, A. C., & Saini, G. (2019). Recycled Aggregate filled waste plastic bottles as a replacement of bricks. Materials Today: Proceedings, 15, 663-668. https://doi.org/10.1016/j.matpr.2019.04.135
• Safinia, S., & Alkalbani, A. (2016). Use of recycled plastic water bottles in concrete blocks. Procedia Engineering, 164, 214-221. https://doi.org/10.1016/j.proeng.2016.11.612
• Mokhtar, M., Sahat, S., Hamid, B., Kaamin, M., Kesot, M. J., Wen, L. C., ... & Lei, V. S. J. (2016). Application of plastic bottle as a wall structure for green house. ARPN Journal of Engineering and Applied Sciences, 11(12), 7617-7621.
• Alaloul, W. S., John, V. O., & Musarat, M. A. (2020). Mechanical and thermal properties of interlocking bricks utilizing wasted polyethylene terephthalate. International Journal of Concrete Structures and Materials, 14, 1-11. https://doi.org/10.1186/s40069-020-00399-9
• Hameed, A. M., & Ahmed, B. A. F. (2019). Employment the plastic waste to produce the light weight concrete. Energy Procedia, 157, 30-38. https://doi.org/10.1016/j.egypro.2018.11.160
• Hossain, M. B., Bhowmik, P., & Shaad, K. M. (2016). Use of waste plastic aggregation in concrete as a constituent material. Progressive Agriculture, 27(3), 383-391. https://doi.org/10.3329/pa.v27i3.30835
• Khan, I. M., Kabir, S., Alhussain, M. A., & Almansoor, F. F. (2016). Asphalt design using recycled plastic and crumb-rubber waste for sustainable pavement construction. Procedia Engineering, 145, 1557-1564. https://doi.org/10.1016/j.proeng.2016.04.196
• Duan, Z., Deng, Q., Liang, C., Ma, Z., & Wu, H. (2023). Upcycling of recycled plastic fiber for sustainable cementitious composites: A critical review and new perspective. Cement and Concrete Composites, 105192. https://doi.org/10.1016/j.cemconcomp.2023.105192
• Kaluarachchi, M., Waidyasekara, A., Rameezdeen, R., & Chileshe, N. (2021). Mitigating dust pollution from construction activities: A behavioural control perspective. Sustainability, 13(16), 9005. https://doi.org/10.3390/su13169005
• Thorpe, A., Ritchie, A. S., Gibson, M. J., & Brown, R. C. (1999). Measurements of the effectiveness of dust control on cut-off saws used in the construction industry. Annals of Occupational Hygiene, 43(7), 443-456. https://doi.org/10.1093/annhyg/43.7.443