Rapid Physisorption of Cr(VI) Using Cassava Peel Biosorbents: Kinetics, Isotherm Analysis and Mechanistic Insights
Abstract
Increasing environmental concerns and strict discharge regulations have driven the need for efficient and low-cost treatment methods for industrial effluents. Chromium, particularly in its hexavalent form [Cr(VI)], is one of the most hazardous pollutants present in wastewater due to its high toxicity and carcinogenic nature. This study explores the potential of cassava peels (Manihot esculenta), an abundant agricultural byproduct, as a biosorbent for the rapid removal of Cr(VI) from aqueous solutions. Batch adsorption experiments were conducted to assess the influence of various parameters, including adsorbent dosage, initial Cr(VI) concentration, pH, and contact time. Optimal removal was observed at pH 2, with a contact time of just 5 min and an adsorbent dosage of 16 g.L-1, achieving a maximum removal efficiency of 99.53 %. Adsorption equilibrium data were evaluated using Langmuir, Freundlich, and Dubinin-Radushkevich isotherm models. Among these, the Langmuir model provided the best fit, indicating monolayer adsorption, with a maximum adsorption capacity of 5.076 mg.g-1. The mean adsorption energy calculated from the Dubinin-Radushkevich model (E = 0.997 kJ.mol-1) confirmed that the process was dominated by physisorption. Kinetic analysis showed a strong correlation with the pseudo-second-order model (R² = 1.0), suggesting that the rate-limiting step involves surface interaction between the Cr(VI) ions and functional groups on the cassava peel surface. These findings highlight cassava peels as a promising, renewable, and cost-effective material for the rapid removal of Cr(VI) from industrial wastewater, particularly under acidic conditions.
Keywords
Supporting Institution
Kamaraj College of Engineering and Technology, Madurai, India and Department of Biotechnology, K.S.Rangasamy College of Technology, Namakkal, India
Ethical Statement
The authors declare that the work presented in this manuscript is original and has been carried out in accordance with the ethical standards of the institution and relevant national and international guidelines.
No human participants or animals were involved in this study, and hence no ethical approval was required.
All authors have read and approved the final version of the manuscript and agree to be accountable for its contents.
The manuscript has not been published previously and is not under consideration for publication elsewhere.
Any sources of data, materials, or literature have been properly cited, and due credit has been given to all contributors.
The authors declare that there is no conflict of interest regarding the publication of this paper.
Thanks
Kamaraj College of Engineering and Technology, Madurai, India and Department of Biotechnology, K.S.Rangasamy College of Technology, Namakkal, India
References
- Abdullah, M. A., Chiang, L., & Nadeem, M. (2009). Comparative evaluation of adsorption kinetics and isotherms of a natural product removal by Amberlite polymeric adsorbents. Chemical Engineering Journal, 146(3), 370-376. https://doi.org/10.1016/j.cej.2008.06.018
- Ahmad, A. A., & Hameed, B. H. (2010). Fixed-bed adsorption of reactive azo dye onto granular activated carbon prepared from waste. Journal of Hazardous Materials, 175(1-3), 298-303. https://doi.org/10.1016/j.jhazmat.2009.10.003
- Ahmed, S. F., Mofijur, M., Nuzhat, S., Chowdhury, A. T., Rafa, N., Uddin, M. A., Inayat, A., Mahlia., T.M.I., Ong, H.C., Chia, W.Y., & Show, P. L. (2021). Recent developments in physical, biological, chemical, and hybrid treatment techniques for removing emerging contaminants from wastewater. Journal of Hazardous Materials, 416, 125912. https://doi.org/10.1016/j.jhazmat.2021.125912
- Ali, I., & Gupta, V. K. (2006). Advances in water treatment by adsorption technology. Nature Protocols, 1(6), 2661-2667. https://doi.org/10.1038/nprot.2006.370
- Allen, S. J., Mckay, G., & Porter, J. F. (2004). Adsorption isotherm models for basic dye adsorption by peat in single and binary component systems. Journal of Colloid and Interface Science, 280(2), 322-333. https://doi.org/10.1016/j.jcis.2004.08.078
- Anyanwu, C. N., Ibeto, C. N., Ezeoha, S. L., & Ogbuagu, N. J. (2015). Sustainability of cassava (Manihot esculenta Crantz) as industrial feedstock, energy and food crop in Nigeria. Renewable Energy, 81, 745-752. https://doi.org/10.1016/j.renene.2015.03.075
- APHA (1926). Standard methods for the examination of water and wastewater (Vol. 6). American public health association.
- Argun, M. E., Dursun, S., Ozdemir, C., & Karatas, M. (2007). Heavy metal adsorption by modified oak sawdust: Thermodynamics and kinetics. Journal of Hazardous Materials, 141(1), 77-85. https://doi.org/10.1016/j.jhazmat.2006.06.095
Details
Primary Language
English
Subjects
Environmental and Sustainable Processes, Chemical Engineering (Other)
Journal Section
Research Article
Authors
Publication Date
October 8, 2025
Submission Date
April 22, 2025
Acceptance Date
September 17, 2025
Published in Issue
Year 2025 Volume: 9 Number: 4
APA
A, K., Senthilkumar, P., Sivavadivel, K., Karthikeyan, J., Sivasamy, S., Mayilesan, V., & Balakrishnan, R. (2025). Rapid Physisorption of Cr(VI) Using Cassava Peel Biosorbents: Kinetics, Isotherm Analysis and Mechanistic Insights. Turkish Journal of Engineering, 9(4), 702-711. https://doi.org/10.31127/tuje.1681301
AMA
1.A K, Senthilkumar P, Sivavadivel K, et al. Rapid Physisorption of Cr(VI) Using Cassava Peel Biosorbents: Kinetics, Isotherm Analysis and Mechanistic Insights. TUJE. 2025;9(4):702-711. doi:10.31127/tuje.1681301
Chicago
A, Karthika, Priyadarshini Senthilkumar, Karnika Sivavadivel, et al. 2025. “Rapid Physisorption of Cr(VI) Using Cassava Peel Biosorbents: Kinetics, Isotherm Analysis and Mechanistic Insights”. Turkish Journal of Engineering 9 (4): 702-11. https://doi.org/10.31127/tuje.1681301.
EndNote
A K, Senthilkumar P, Sivavadivel K, Karthikeyan J, Sivasamy S, Mayilesan V, Balakrishnan R (October 1, 2025) Rapid Physisorption of Cr(VI) Using Cassava Peel Biosorbents: Kinetics, Isotherm Analysis and Mechanistic Insights. Turkish Journal of Engineering 9 4 702–711.
IEEE
[1]K. A et al., “Rapid Physisorption of Cr(VI) Using Cassava Peel Biosorbents: Kinetics, Isotherm Analysis and Mechanistic Insights”, TUJE, vol. 9, no. 4, pp. 702–711, Oct. 2025, doi: 10.31127/tuje.1681301.
ISNAD
A, Karthika - Senthilkumar, Priyadarshini - Sivavadivel, Karnika - Karthikeyan, Janashruthi - Sivasamy, Sivaprakash - Mayilesan, Vinetha - Balakrishnan, Rengesh. “Rapid Physisorption of Cr(VI) Using Cassava Peel Biosorbents: Kinetics, Isotherm Analysis and Mechanistic Insights”. Turkish Journal of Engineering 9/4 (October 1, 2025): 702-711. https://doi.org/10.31127/tuje.1681301.
JAMA
1.A K, Senthilkumar P, Sivavadivel K, Karthikeyan J, Sivasamy S, Mayilesan V, Balakrishnan R. Rapid Physisorption of Cr(VI) Using Cassava Peel Biosorbents: Kinetics, Isotherm Analysis and Mechanistic Insights. TUJE. 2025;9:702–711.
MLA
A, Karthika, et al. “Rapid Physisorption of Cr(VI) Using Cassava Peel Biosorbents: Kinetics, Isotherm Analysis and Mechanistic Insights”. Turkish Journal of Engineering, vol. 9, no. 4, Oct. 2025, pp. 702-11, doi:10.31127/tuje.1681301.
Vancouver
1.Karthika A, Priyadarshini Senthilkumar, Karnika Sivavadivel, Janashruthi Karthikeyan, Sivaprakash Sivasamy, Vinetha Mayilesan, Rengesh Balakrishnan. Rapid Physisorption of Cr(VI) Using Cassava Peel Biosorbents: Kinetics, Isotherm Analysis and Mechanistic Insights. TUJE. 2025 Oct. 1;9(4):702-11. doi:10.31127/tuje.1681301