MECHANICAL AND WEAR CHARACTERISATION OF QUARRY TAILINGS REINFORCED A6063 METAL MATRIX COMPOSITES

Year 2019, Volume: 3 Issue: 3, 133 - 139, 01.07.2019

Stephen Durowaye , Olatunde Sekunowo Babatunde Bolasodun İsaac Oduaran Ganiyu Lawal

https://doi.org/10.31127/tuje.490509

Abstract

The viability of utilizing cheaply sourced quarry tailings (QTs) particles as reinforcing materials for the development of low cost high performance aluminium matrix composites for structural and industrial applications was explored. Aluminium alloy (A6063) was reinforced with 2 – 10 wt. % of 80 µm QTs particulates using stir casting method. Microstructural, mechanical and wear characterisations were carried out on the composites. Micro hardness and ultimate tensile strength of the composites were improved with addition of reinforced particulate in the base matrix alloy. Addition of quarry tailings reinforcements also decreased the wear rate of the composites from 245 mm/Nm³ to 180 mm/Nm³ for 10N and from 260 mm/Nm³ to 135 mm/Nm³ for 15 N. Optical and SEM examinations revealed uniform distributions of the QT particles in the molten matrix. 

Keywords

Aluminium matrix composites, Quarry tailings, Characterisation

References

• Agunsoye, J. O., Sefiu, A. B., Bamigbaiye, A., Odunmosu, K. A. and Akinboye, I. (2018). ‘‘Recycled ceramic tile composite for automobile applications, a comparative study with Nissan Jeep Cherokee brake pad.’’ Engineering and Applied Science Research, Vol. 45, No. 3, pp. 180-187.
• Aigbodion, V. S. and Akadike, U. (2010). ‘‘Development of asbestos – free brake pad using bagasse.’’ Tribology in Industry, Vol. 32, No. 1, pp. 45–50.
• Alaneme, K. K. and Bodurin, B. (2011). ‘‘Corrosion behavior of alumina reinforced aluminium (6063) metal matrix composites.’’ Journal of Minerals & Materials Characterization & Engineering, Vol. 10, pp. 96-100.
• Alaneme, K. K. and Sanusi, K. O. (2015). ‘‘Mechanical and wear behaviour of rice husk ash alumina graphite hybrid reinforced aluminium based composites.’’ Engineering Science and Technology International, Vol. 18, pp. 416-422.
• Bodunrin, M. O, Alaneme, K. K. and Chown, L. H. (2015). ‘‘Aluminium matrix hybrid composites: a review of reinforcement philosophies; mechanical, corrosion and tribological characteristics.’’ Journal of Materials Research and Technology, Vol. 4, pp. 434-445.
• Djafri, M., Bouchetara, M., Busch, C. and Weber, S. (2014). ‘‘Experimental study of the tribological behaviour of materials of brake.’’ Mechanika, Vol. 20, No. 4, pp. 420 – 425.
• Durowaye, S. I., Sekunowo, O. I., Lawal, G. I. and Orji, J. (2018). ‘‘Effects of ZnO and graphite particulates on mechanical and wear characteristics of Al-Si alloy hybrid composites.’’ Usak University Journal of Engineering Sciences (UUJES), Vol. 1, No. 1, pp. 19-27.
• Kalaiselvan, K., Murugan, N. and Parameswaran, S. (2011). ‘‘Production and characterization of AA6061–B4C stir cast composite.’’ Materials and Design. Vol. 32, No. 7, pp. 4004-4009.
• Ramesh, M., Karthikeyan, T., Kumaravel, A., Senthil Kumaran, S. and Raja V.L. (2012). ‘‘Metallurgical and mechanical behavior of basalt particulate reinforced aluminium (A356) matrix composites.’’ European Journal of Scientific Research, Vol. 95, pp. 524-532.
• Rohatgi, P. K., Schultz, B. F, Daoud, A. and Zhang, W. W. (2010). ‘‘Tribological performance of A206 aluminum alloy containing silica sand particles.’’ Tribology International, Vol. 43, pp. 455-466.
• Surappa, M. K. and Sudarshan, (2008). ‘‘Dry sliding wear of fly ash particle reinforced A356 Al composites.’’ Wear, Vol. 265, pp. 349-360.
• Yawas, D. S., Aku, S.Y. and Amaren, S.G. (2016). ‘‘Morphology and Properties of Periwinkle Shell Asbestos Free Brake Pad.’’ Journal of King Saud University – Engineering Sciences, Vol. 28, pp. 103–109.