Öz
This study presents a realization of a ZigBEE based wireless ECG system for remotely monitoring the patient's electrocardiogram (ECG) via wireless heart sensor (AD8232). The presented wireless ECG system is composed of hardware such as Arduino micro-controller connected to the electrodes on the patient, personal laptop, tablet PC, smart phone etc. for ECG signal monitoring, AD8232 sensor for measuring heart rate, ZigBEE transceiver (XBee S2C) for wireless transmission of ECG signal, and software such as Serial Plot or Arduino Serial Plotter. The results from the tests show that the system designed over a single node can work seamlessly in an open area of approximately 20 to 100 meters and take ECG measurements wirelessly. Additionally, the obtained results from the tests show that the ECG measurements can be taken wirelessly within a range of 20 to 80 meters when the obstacles are also placed between ZigBEE transmitter and receiver.
Anahtar Kelimeler
Kaynakça
- Akbulut A., Ekin Ş., Tunç Ö. (2017), Implementation of ZigBEE (IEEE 802.15.4) Based Wireless ECG System, Bachelor Thesis, Nuh Naci Yazgan University, Department of Electrical and Electronics Engineering, Kayseri, Turkey.
- Dağtaş S., Pekhteryev G. and Şahinoğlu Z. (2007), “Multi-stage Real Time Health Monitoring via ZigBEE in Smart Homes”.
- IEEE Standard (2007), IEEE Standard for Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) specifications for Low Rate Wireless Personal Area Networks (LR-WPANs).
- Liang X. and Balasingham I. (2007), “Performance Analysis of The IEEE 802.15.4 Based ECG Monitoring Network”.
- Margolis M. (2011), “Arduino Cookbook ”, First Edition, Chapter 14.
- Park C., Chou P., Bai Y., Matthews R. and Hibbs A. (2006), “An Ultra Wearable, Wireless, Low Power ECG Monitoring System”.
- Romer K. and Friedemann M. (2004), “The Design Space of Wireless Sensor Networks”, 54–61.
- Somay A. (2009), “Implementation of A Wireless Measurement Probe using IEEE 802.15.4 (ZigBEE) Standard”, Ms.C. Thesis, Graduate School of Natural and Applied Science, Black Sea Technical University, Trabzon.
Öz
Kaynakça
- Akbulut A., Ekin Ş., Tunç Ö. (2017), Implementation of ZigBEE (IEEE 802.15.4) Based Wireless ECG System, Bachelor Thesis, Nuh Naci Yazgan University, Department of Electrical and Electronics Engineering, Kayseri, Turkey.
- Dağtaş S., Pekhteryev G. and Şahinoğlu Z. (2007), “Multi-stage Real Time Health Monitoring via ZigBEE in Smart Homes”.
- IEEE Standard (2007), IEEE Standard for Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) specifications for Low Rate Wireless Personal Area Networks (LR-WPANs).
- Liang X. and Balasingham I. (2007), “Performance Analysis of The IEEE 802.15.4 Based ECG Monitoring Network”.
- Margolis M. (2011), “Arduino Cookbook ”, First Edition, Chapter 14.
- Park C., Chou P., Bai Y., Matthews R. and Hibbs A. (2006), “An Ultra Wearable, Wireless, Low Power ECG Monitoring System”.
- Romer K. and Friedemann M. (2004), “The Design Space of Wireless Sensor Networks”, 54–61.
- Somay A. (2009), “Implementation of A Wireless Measurement Probe using IEEE 802.15.4 (ZigBEE) Standard”, Ms.C. Thesis, Graduate School of Natural and Applied Science, Black Sea Technical University, Trabzon.
Ayrıntılar
| Bölüm | Makaleler |
|---|---|
| Yazarlar | |
| Yayımlanma Tarihi | 26 Aralık 2017 |
| Gönderilme Tarihi | 8 Ekim 2017 |
| Yayımlandığı Sayı | Yıl 2017 Cilt: 9 Sayı: 3 |