OPTIMUM MIX PROPORTIONING AND MODELING OF COMPRESSIVE STRENGTH OF CONCRETE CONTAINING QUARRY DUST USING RESPONSE SURFACE METHODOLOGY

Yıl 2024, Cilt: 7 Sayı: 1, 27 - 42, 30.06.2024

Jibrin Abubakar Aminu Ahmed Bala Alhaji Abbas Raphael Hyongu

https://doi.org/10.47137/uujes.1373630

Öz

Over dependence on the sole use of river sand as fine aggregate in producing concrete over the years, has raised serious environmental concerns. Incessant mining of river sand accelerates the deterioration of the river bed, causes floods, and affects the diversity of aquatic life negatively. In this study, the possibility of using quarry dust to partially replace river sand in producing concrete was investigated. Central Composite Design (CCD) in Minitab was used to generate 31 mixes with different combinations of water to cement (W/C), Quarry dust to Sand (Q/S), Sand to Total Aggregate (S/TA) and Total Aggregate to Cement (TA/C) ratios. The fresh concrete was tested for workability using slump test. Three (3) concrete cubes were cast per sample point and tested for compressive strength at 28 days of curing. A regression model was developed and analyzed using response surface methodology (RSM) at 95% confidence level. Results obtained showed that compressive strength up to 27.44N/mm2 can be achieved with combination of W/C of 0.36, Q/S of 0.3, S/TA of 0.4 and TA/C of 3. Model developed has overall P value of 0, R2 value of 75.69% and Adjusted R2 value of 66.85% and validated to be well fitted. It was concluded among others, that quarry dust can be used as a constituent material in structural concrete, optimum percentage replacement of sand with quarry dust is 30% and that the developed model is valid, adequate and well fitted.

Anahtar Kelimeler

Optimum mix proportioning, modeling, compesive strength, quarry dust, concrete, response surface methodology

Kaynakça

• Pawar C, Sharma P and Titiksh A. Gradation of aggregates and its effects on properties of concrete, International Journal of Trend in Research and Development, 2016;3(2):581-584.
• Sidney M. Concrete constituent materials, in Nawy EG (Ed.), Concrete construction engineering hand book. New York: CRC Press; 2008.
• Abdirahman ID. Comparative study between natural and artificial aggregates Mogadishu University Journal, 2017;3:69-98.
• Shetty MS. Concrete technology theory and practice. Ram Nagar, Delhi: S. Chand & Company Limited; 2005.
• Neville AM and Brooks JJ. (2010). Concrete technology. Harlow, England: Pearson; 2010.
• Kalhara N, Perera A, Perera A, Lankathilake N, and Ranasinghe T. (2018). Suitability of soil washed sand as fine aggregates to replace river sand in the concrete, American Scientific Research Journal for Engineering, Technology, and Sciences, 2018;46(1):25-33.
• Santhos KG, Subhani SM, Bahurudeen, A. (2021). Cleaner Production of concrete by using Industrial by-products as fine aggregates: a suitable solution to excessive river sand mining, Journal of Building Engineering, 2021;42.
• Gop MK and Dey G. (2018). Upgrading of grading zone with partial replacement of river sand by crushed brik grit and its effect on strength and durability of concrete. In proceedings of the 11th Structural Engineering Convention; 2018 Dec 19-21; Jadavpur University, Kolkata, India; 2015.
• Nethravathi SM and Gagan KRR. Comparison of natural and manufactured fine aggregates in cement mortar, Journal of Emerging Technologies and Innovative Research (JETIR), 2016;3(8):10-11.
• Das B and Gattu M. Study on performance of quarry dust as fine aggregate in concrete. In proceedings of International Conference on Advances in Construction Materials and Structures: 2018 March 7-8; IIT Roorkee, Roorkee, Uttarakhand, India; 2018.
• Balamurugan G and Perumal P. Use of quarry dust to replace sand in concrete-an experimental study, International Journal of Scientific and Research Publications, 2013;3(12): 1-4.
• Sethish KK, Bala GA, Hariharan J, Dhakshan KD, and Vimalraja J. Study of partial replacement of fine aggregate by using quarry dust, International Journal of Pure and Applied Mathematics, 2017;116(4): 61-67.
• Lwin PP and Zaw EE. Suitability of Quarry Dust as Fine Aggregate in Concrete. University Conference on Engineering, Technology and Applied Science, Pyay Technological University, Myanmar; 2018.
• Olaoye B. A comprehensive handout on central composite design (CCD), Obafemi Awolowo University; 2020.
• BS EN 12350-2. Testing fresh concrete. Slump-test. London: British Standard Institution; 2009.
• BS EN 12390-2. Testing hardened concrete. Making and curing specimens for strength tests. London: British Standard Institution; 2000.
• BS EN 12390-3. Testing hardened concrete. Compressive strength of test specimens. London: British Standard Institution; 2002.
• EN 206-1. Concrete-specification, performance, production and conformity. London: British Standard Institution; 2000.
• Uddin MT, Harun, MZB, Joy JA and Ahmed MA. Effect of sand-to-aggregate ratio on mechanical properties of concrete. Joint Conference on Advances in Bridge Engineering-IV: IABSE-JSCE 2020 August 26-27; Dhaka, Bangladesh: 2020.
• Salain IMAK (2021). Effect of water/cement and aggregate/cement ratios on consistency and compressive strength of concrete using volcanic stone waste as aggregates. Civil Engineering and Architecture, 2021;9(6): 1900-1908.
• Saloma H, Ferdinand N, Muliawan S and Rachman MF (2020). The effect of A/C variation on compressive strength, permeability and porosity of pervious concrete, International Journal of Scientific and Technology Research, 2021;9(8): 866-871.
• Pramod SS, Pradeep GK, Veeresh A, Vinay B and Sweta CP. Experimental investigation on effect of sand content in pervious concrete, International Research Journal of Engineering and Technology (IRJET), 2019;6(5): 6027-6030.
• Triola MF. Essentials of statistics. 13th edition, Boston: Pearson; 2018.
• Montgomery CD and Runger GC (2003). Applied Statistics and Probability for Engineers, 3rd Edition, New York: John Wiley & Sons Inc.; 2003
• Hamada HM, Al-Attar AA, Tayeh B and Yahaya FBM. Optimizing the concrete strength of lightweight concrete containing nano palm oil fuel ash and palm oil clinker using response surface method, Case Studies in Construction Materials, 2022;16: 1-22.